openwrt_archive/target/linux/lantiq/dts/ARV4510PW.dts
John Crispin d5b866bd33 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-02 18:50:18 +00:00

231 lines
3.8 KiB
Plaintext

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV4510PW - Wippies, Elisa";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power;
failsafe = &power2;
running = &power;
dsl = &adsl;
internet = &internet;
usb = &usb;
usb2 = &usb2;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
lantiq,noxip;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu a23";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1", "exin2";
lantiq,function = "exin";
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1", "gnt2";
lantiq,function = "pci";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
buttons {
lantiq,pins = "io3", "io14";
lantiq,pull = <2>;
lantiq,output = <0>;
};
};
};
gpios: stp@E100BB0 {
status = "okay";
lantiq,groups = <0x7>;
};
etop@E180000 {
phy-mode = "rmii";
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x6000 0 0 1 &icu0 135
0x7800 0 0 1 &icu0 66
0x7800 0 0 2 &icu0 66
0x7800 0 0 3 &icu0 66
>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x7>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 14 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio 3 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpios 21 0>;
default-state = "keep";
};
power2: power2 {
label = "power2";
gpios = <&gpios 20 0>;
};
lan1 {
label = "lan1";
gpios = <&gpios 19 0>;
};
lan2 {
label = "lan2";
gpios = <&gpios 18 0>;
};
lan3 {
label = "lan3";
gpios = <&gpios 17 0>;
};
lan4 {
label = "lan4";
gpios = <&gpios 16 0>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpios 15 0>;
};
adsl: adsl {
label = "adsl";
gpios = <&gpios 14 0>;
};
internet: internet {
label = "internet";
gpios = <&gpios 13 0>;
};
internet2 {
label = "internet2";
gpios = <&gpios 12 0>;
};
voip {
label = "voip";
gpios = <&gpios 11 0>;
};
phone {
label = "phone";
gpios = <&gpios 10 0>;
};
phone2 {
label = "phone2";
gpios = <&gpios 9 0>;
};
usb: usb {
label = "usb";
gpios = <&gpios 8 0>;
};
usb2: usb2 {
label = "usb2";
gpios = <&gpios 7 0>;
};
usb3 {
label = "usb3";
gpios = <&gpios 6 0>;
};
unlabeled {
label = "unlabeled";
gpios = <&gpios 5 0>;
};
};
};