a45fb9ceb3
Based on 4.4-rc3. Runtime tested on MIPS. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47701
361 lines
9.8 KiB
Diff
361 lines
9.8 KiB
Diff
This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
|
|
|
|
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
|
|
|
|
--- a/drivers/watchdog/Kconfig
|
|
+++ b/drivers/watchdog/Kconfig
|
|
@@ -1216,6 +1216,15 @@ config WDT_MTX1
|
|
Hardware driver for the MTX-1 boards. This is a watchdog timer that
|
|
will reboot the machine after a 100 seconds timer expired.
|
|
|
|
+config GPIO_WDT
|
|
+ tristate "GPIO Hardware Watchdog"
|
|
+ help
|
|
+ Hardware driver for GPIO-controlled watchdogs. GPIO pin and
|
|
+ toggle interval settings are platform-specific. The driver
|
|
+ will stop toggling the GPIO (i.e. machine reboots) after a
|
|
+ 100 second timer expired and no process has written to
|
|
+ /dev/watchdog during that time.
|
|
+
|
|
config PNX833X_WDT
|
|
tristate "PNX833x Hardware Watchdog"
|
|
depends on SOC_PNX8335
|
|
--- a/drivers/watchdog/Makefile
|
|
+++ b/drivers/watchdog/Makefile
|
|
@@ -140,6 +140,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
|
|
obj-$(CONFIG_INDYDOG) += indydog.o
|
|
obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
|
|
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
|
|
+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
|
|
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
|
|
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
|
|
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
|
--- /dev/null
|
|
+++ b/drivers/watchdog/old_gpio_wdt.c
|
|
@@ -0,0 +1,301 @@
|
|
+/*
|
|
+ * Driver for GPIO-controlled Hardware Watchdogs.
|
|
+ *
|
|
+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
|
|
+ *
|
|
+ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
|
|
+ *
|
|
+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
|
|
+ * All Rights Reserved.
|
|
+ * http://www.4g-systems.biz
|
|
+ *
|
|
+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+ *
|
|
+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
|
|
+ * warranty for any of this software. This material is provided
|
|
+ * "AS-IS" and at no charge.
|
|
+ *
|
|
+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
|
|
+ *
|
|
+ * Release 0.01.
|
|
+ * Author: Michael Stickel michael.stickel@4g-systems.biz
|
|
+ *
|
|
+ * Release 0.02.
|
|
+ * Author: Florian Fainelli florian@openwrt.org
|
|
+ * use the Linux watchdog/timer APIs
|
|
+ *
|
|
+ * Release 0.03.
|
|
+ * Author: Mathias Adam <m.adam--linux@adamis.de>
|
|
+ * make it a generic gpio watchdog driver
|
|
+ *
|
|
+ * The Watchdog is configured to reset the MTX-1
|
|
+ * if it is not triggered for 100 seconds.
|
|
+ * It should not be triggered more often than 1.6 seconds.
|
|
+ *
|
|
+ * A timer triggers the watchdog every 5 seconds, until
|
|
+ * it is opened for the first time. After the first open
|
|
+ * it MUST be triggered every 2..95 seconds.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/moduleparam.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/miscdevice.h>
|
|
+#include <linux/fs.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/timer.h>
|
|
+#include <linux/completion.h>
|
|
+#include <linux/jiffies.h>
|
|
+#include <linux/watchdog.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/uaccess.h>
|
|
+#include <linux/gpio.h>
|
|
+#include <linux/old_gpio_wdt.h>
|
|
+
|
|
+static int ticks = 100 * HZ;
|
|
+
|
|
+static struct {
|
|
+ struct completion stop;
|
|
+ spinlock_t lock;
|
|
+ int running;
|
|
+ struct timer_list timer;
|
|
+ int queue;
|
|
+ int default_ticks;
|
|
+ unsigned long inuse;
|
|
+ unsigned gpio;
|
|
+ unsigned int gstate;
|
|
+ int interval;
|
|
+ int first_interval;
|
|
+} gpio_wdt_device;
|
|
+
|
|
+static void gpio_wdt_trigger(unsigned long unused)
|
|
+{
|
|
+ spin_lock(&gpio_wdt_device.lock);
|
|
+ if (gpio_wdt_device.running && ticks > 0)
|
|
+ ticks -= gpio_wdt_device.interval;
|
|
+
|
|
+ /* toggle wdt gpio */
|
|
+ gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
|
|
+ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
|
|
+
|
|
+ if (gpio_wdt_device.queue && ticks > 0)
|
|
+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
|
|
+ else
|
|
+ complete(&gpio_wdt_device.stop);
|
|
+ spin_unlock(&gpio_wdt_device.lock);
|
|
+}
|
|
+
|
|
+static void gpio_wdt_reset(void)
|
|
+{
|
|
+ ticks = gpio_wdt_device.default_ticks;
|
|
+}
|
|
+
|
|
+
|
|
+static void gpio_wdt_start(void)
|
|
+{
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
|
|
+ if (!gpio_wdt_device.queue) {
|
|
+ gpio_wdt_device.queue = 1;
|
|
+ gpio_wdt_device.gstate = 1;
|
|
+ gpio_set_value(gpio_wdt_device.gpio, 1);
|
|
+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
|
|
+ }
|
|
+ gpio_wdt_device.running++;
|
|
+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
|
|
+}
|
|
+
|
|
+static int gpio_wdt_stop(void)
|
|
+{
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
|
|
+ if (gpio_wdt_device.queue) {
|
|
+ gpio_wdt_device.queue = 0;
|
|
+ gpio_wdt_device.gstate = 0;
|
|
+ gpio_set_value(gpio_wdt_device.gpio, 0);
|
|
+ }
|
|
+ ticks = gpio_wdt_device.default_ticks;
|
|
+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Filesystem functions */
|
|
+
|
|
+static int gpio_wdt_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ if (test_and_set_bit(0, &gpio_wdt_device.inuse))
|
|
+ return -EBUSY;
|
|
+ return nonseekable_open(inode, file);
|
|
+}
|
|
+
|
|
+
|
|
+static int gpio_wdt_release(struct inode *inode, struct file *file)
|
|
+{
|
|
+ clear_bit(0, &gpio_wdt_device.inuse);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
|
|
+ unsigned long arg)
|
|
+{
|
|
+ void __user *argp = (void __user *)arg;
|
|
+ int __user *p = (int __user *)argp;
|
|
+ unsigned int value;
|
|
+ static const struct watchdog_info ident = {
|
|
+ .options = WDIOF_CARDRESET,
|
|
+ .identity = "GPIO WDT",
|
|
+ };
|
|
+
|
|
+ switch (cmd) {
|
|
+ case WDIOC_GETSUPPORT:
|
|
+ if (copy_to_user(argp, &ident, sizeof(ident)))
|
|
+ return -EFAULT;
|
|
+ break;
|
|
+ case WDIOC_GETSTATUS:
|
|
+ case WDIOC_GETBOOTSTATUS:
|
|
+ put_user(0, p);
|
|
+ break;
|
|
+ case WDIOC_SETOPTIONS:
|
|
+ if (get_user(value, p))
|
|
+ return -EFAULT;
|
|
+ if (value & WDIOS_ENABLECARD)
|
|
+ gpio_wdt_start();
|
|
+ else if (value & WDIOS_DISABLECARD)
|
|
+ gpio_wdt_stop();
|
|
+ else
|
|
+ return -EINVAL;
|
|
+ return 0;
|
|
+ case WDIOC_KEEPALIVE:
|
|
+ gpio_wdt_reset();
|
|
+ break;
|
|
+ default:
|
|
+ return -ENOTTY;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
|
|
+ size_t count, loff_t *ppos)
|
|
+{
|
|
+ if (!count)
|
|
+ return -EIO;
|
|
+ gpio_wdt_reset();
|
|
+ return count;
|
|
+}
|
|
+
|
|
+static const struct file_operations gpio_wdt_fops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .llseek = no_llseek,
|
|
+ .unlocked_ioctl = gpio_wdt_ioctl,
|
|
+ .open = gpio_wdt_open,
|
|
+ .write = gpio_wdt_write,
|
|
+ .release = gpio_wdt_release,
|
|
+};
|
|
+
|
|
+
|
|
+static struct miscdevice gpio_wdt_misc = {
|
|
+ .minor = WATCHDOG_MINOR,
|
|
+ .name = "watchdog",
|
|
+ .fops = &gpio_wdt_fops,
|
|
+};
|
|
+
|
|
+
|
|
+static int gpio_wdt_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int ret;
|
|
+ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
|
|
+
|
|
+ gpio_wdt_device.gpio = gpio_wdt_data->gpio;
|
|
+ gpio_wdt_device.interval = gpio_wdt_data->interval;
|
|
+ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
|
|
+ if (gpio_wdt_device.first_interval <= 0) {
|
|
+ gpio_wdt_device.first_interval = gpio_wdt_device.interval;
|
|
+ }
|
|
+
|
|
+ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
|
|
+ if (ret < 0) {
|
|
+ dev_err(&pdev->dev, "failed to request gpio");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ spin_lock_init(&gpio_wdt_device.lock);
|
|
+ init_completion(&gpio_wdt_device.stop);
|
|
+ gpio_wdt_device.queue = 0;
|
|
+ clear_bit(0, &gpio_wdt_device.inuse);
|
|
+ setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
|
|
+ gpio_wdt_device.default_ticks = ticks;
|
|
+
|
|
+ gpio_wdt_start();
|
|
+ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
|
|
+ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int gpio_wdt_remove(struct platform_device *pdev)
|
|
+{
|
|
+ /* FIXME: do we need to lock this test ? */
|
|
+ if (gpio_wdt_device.queue) {
|
|
+ gpio_wdt_device.queue = 0;
|
|
+ wait_for_completion(&gpio_wdt_device.stop);
|
|
+ }
|
|
+
|
|
+ gpio_free(gpio_wdt_device.gpio);
|
|
+ misc_deregister(&gpio_wdt_misc);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver gpio_wdt_driver = {
|
|
+ .probe = gpio_wdt_probe,
|
|
+ .remove = gpio_wdt_remove,
|
|
+ .driver.name = "gpio-wdt",
|
|
+ .driver.owner = THIS_MODULE,
|
|
+};
|
|
+
|
|
+static int __init gpio_wdt_init(void)
|
|
+{
|
|
+ return platform_driver_register(&gpio_wdt_driver);
|
|
+}
|
|
+arch_initcall(gpio_wdt_init);
|
|
+
|
|
+/*
|
|
+ * We do wdt initialization in two steps: arch_initcall probes the wdt
|
|
+ * very early to start pinging the watchdog (misc devices are not yet
|
|
+ * available), and later module_init() just registers the misc device.
|
|
+ */
|
|
+static int gpio_wdt_init_late(void)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = misc_register(&gpio_wdt_misc);
|
|
+ if (ret < 0) {
|
|
+ pr_err("GPIO_WDT: failed to register misc device\n");
|
|
+ return ret;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+#ifndef MODULE
|
|
+module_init(gpio_wdt_init_late);
|
|
+#endif
|
|
+
|
|
+static void __exit gpio_wdt_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&gpio_wdt_driver);
|
|
+}
|
|
+module_exit(gpio_wdt_exit);
|
|
+
|
|
+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
|
|
+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
|
+MODULE_ALIAS("platform:gpio-wdt");
|
|
--- /dev/null
|
|
+++ b/include/linux/old_gpio_wdt.h
|
|
@@ -0,0 +1,21 @@
|
|
+/*
|
|
+ * Definitions for the GPIO watchdog driver
|
|
+ *
|
|
+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#ifndef _GPIO_WDT_H_
|
|
+#define _GPIO_WDT_H_
|
|
+
|
|
+struct gpio_wdt_platform_data {
|
|
+ int gpio; /* GPIO line number */
|
|
+ int interval; /* watchdog reset interval in system ticks */
|
|
+ int first_interval; /* first wd reset interval in system ticks */
|
|
+};
|
|
+
|
|
+#endif /* _GPIO_WDT_H_ */
|