Openwrt/openwrt_archive
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
openwrt_archive/target/linux/generic/patches-3.18/025-bcma_backport.patch
Rafał Miłecki 372a47db13 kernel: 3.18: complete backport of some bcma patch 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


SVN-Revision: 44384
2015-02-11 09:14:48 +00:00

287 lines
9.1 KiB
Diff
Raw Permalink Blame History

--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -24,6 +24,7 @@ struct bcma_bus;
/* main.c */
bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
int timeout);
+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
return;
}
- irq = bcma_core_irq(cc->core);
+ irq = bcma_core_irq(cc->core, 0);
/* Determine the registers of the UARTs */
cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
handle_simple_irq);
}
- hwirq = bcma_core_irq(cc->core);
+ hwirq = bcma_core_irq(cc->core, 0);
err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
cc);
if (err)
@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
return;
bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
- free_irq(bcma_core_irq(cc->core), cc);
+ free_irq(bcma_core_irq(cc->core, 0), cc);
for (gpio = 0; gpio < chip->ngpio; gpio++) {
int irq = irq_find_mapping(cc->irq_domain, gpio);
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
* If disabled, 5 is returned.
* If not supported, 6 is returned.
*/
-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
{
struct bcma_device *mdev = dev->bus->drv_mips.core;
u32 irqflag;
@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
return 5;
}
-unsigned int bcma_core_irq(struct bcma_device *dev)
-{
- unsigned int mips_irq = bcma_core_mips_irq(dev);
- return mips_irq <= 4 ? mips_irq + 2 : 0;
-}
-EXPORT_SYMBOL(bcma_core_irq);
-
static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
{
unsigned int oldirq = bcma_core_mips_irq(dev);
@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
break;
default:
list_for_each_entry(core, &bus->cores, list) {
- core->irq = bcma_core_irq(core);
+ core->irq = bcma_core_irq(core, 0);
}
bcma_err(bus,
"Unknown device (0x%x) found, can not configure IRQs\n",
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
pr_info("PCI: Fixing up device %s\n", pci_name(dev));
/* Fix up interrupt lines */
- dev->irq = bcma_core_irq(pc_host->pdev->core);
+ dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
readrq = pcie_get_readrq(dev);
@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
pci_ops);
- return bcma_core_irq(pc_host->pdev->core);
+ return bcma_core_irq(pc_host->pdev->core, 0);
}
EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -11,6 +11,7 @@
#include <linux/bcma/bcma.h>
#include <linux/slab.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
MODULE_LICENSE("GPL");
@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
return NULL;
}
+static int bcma_of_irq_parse(struct platform_device *parent,
+ struct bcma_device *core,
+ struct of_phandle_args *out_irq, int num)
+{
+ __be32 laddr[1];
+ int rc;
+
+ if (core->dev.of_node) {
+ rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
+ if (!rc)
+ return rc;
+ }
+
+ out_irq->np = parent->dev.of_node;
+ out_irq->args_count = 1;
+ out_irq->args[0] = num;
+
+ laddr[0] = cpu_to_be32(core->addr);
+ return of_irq_parse_raw(laddr, out_irq);
+}
+
+static unsigned int bcma_of_get_irq(struct platform_device *parent,
+ struct bcma_device *core, int num)
+{
+ struct of_phandle_args out_irq;
+ int ret;
+
+ if (!parent || !parent->dev.of_node)
+ return 0;
+
+ ret = bcma_of_irq_parse(parent, core, &out_irq, num);
+ if (ret) {
+ bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
+ ret);
+ return 0;
+ }
+
+ return irq_create_of_mapping(&out_irq);
+}
+
static void bcma_of_fill_device(struct platform_device *parent,
struct bcma_device *core)
{
@@ -161,18 +202,47 @@ static void bcma_of_fill_device(struct p
node = bcma_of_find_child_device(parent, core);
if (node)
core->dev.of_node = node;
+
+ core->irq = bcma_of_get_irq(parent, core, 0);
}
#else
static void bcma_of_fill_device(struct platform_device *parent,
struct bcma_device *core)
{
}
+static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
+ struct bcma_device *core, int num)
+{
+ return 0;
+}
#endif /* CONFIG_OF */
-static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
+unsigned int bcma_core_irq(struct bcma_device *core, int num)
{
- int err;
+ struct bcma_bus *bus = core->bus;
+ unsigned int mips_irq;
+
+ switch (bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+ return bus->host_pci->irq;
+ case BCMA_HOSTTYPE_SOC:
+ if (bus->drv_mips.core && num == 0) {
+ mips_irq = bcma_core_mips_irq(core);
+ return mips_irq <= 4 ? mips_irq + 2 : 0;
+ }
+ if (bus->host_pdev)
+ return bcma_of_get_irq(bus->host_pdev, core, num);
+ return 0;
+ case BCMA_HOSTTYPE_SDIO:
+ return 0;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(bcma_core_irq);
+
+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
+{
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
@@ -196,6 +266,11 @@ static void bcma_register_core(struct bc
case BCMA_HOSTTYPE_SDIO:
break;
}
+}
+
+static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
+{
+ int err;
err = device_register(&core->dev);
if (err) {
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -505,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
bus->nr_cores++;
other_core = bcma_find_core_reverse(bus, core->id.id);
core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
+ bcma_prepare_core(bus, core);
bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
core->core_index, bcma_device_name(&core->id),
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
#define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
extern u32 bcma_core_dma_translation(struct bcma_device *core);
+extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
+
#endif /* LINUX_BCMA_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -43,12 +43,12 @@ struct bcma_drv_mips {
extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
-extern unsigned int bcma_core_irq(struct bcma_device *core);
+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
#else
static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
-static inline unsigned int bcma_core_irq(struct bcma_device *core)
+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
{
return 0;
}
--- a/Documentation/devicetree/bindings/bus/bcma.txt
+++ b/Documentation/devicetree/bindings/bus/bcma.txt
@@ -8,6 +8,11 @@ Required properties:
The cores on the AXI bus are automatically detected by bcma with the
memory ranges they are using and they get registered afterwards.
+Automatic detection of the IRQ number is not working on
+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
+them manually through device tree. Use an interrupt-map to specify the
+IRQ used by the devices on the bus. The first address is just an index,
+because we do not have any special register.
The top-level axi bus may contain children representing attached cores
(devices). This is needed since some hardware details can't be auto
@@ -22,6 +27,22 @@ Example:
ranges = <0x00000000 0x18000000 0x00100000>;
#address-cells = <1>;
#size-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* Ethernet Controller 0 */
+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+
+ /* PCIe Controller 0 */
+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
chipcommon {
reg = <0x00000000 0x1000>;
Reference in New Issue View Git Blame Copy Permalink