cb0eda8f44
These patches are written by Broadcom and will be in mainline Linux kernel soon. I had some problems to get them backported to kernel 4.1, so currently they are only available for 4.3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47253
220 lines
7.7 KiB
Diff
220 lines
7.7 KiB
Diff
From d358480591b34d081806ecb5a9474930a4d59f8a Mon Sep 17 00:00:00 2001
|
|
From: Jon Mason <jonmason@broadcom.com>
|
|
Date: Thu, 15 Oct 2015 15:48:27 -0400
|
|
Subject: [PATCH 46/50] clk: nsp: add clock support for Broadcom Northstar Plus
|
|
SoC
|
|
|
|
The Broadcom Northstar Plus SoC is architected under the iProc
|
|
architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all
|
|
derived from an onboard crystal.
|
|
|
|
Signed-off-by: Jon Mason <jonmason@broadcom.com>
|
|
---
|
|
drivers/clk/bcm/Makefile | 2 +
|
|
drivers/clk/bcm/clk-nsp.c | 135 ++++++++++++++++++++++++++++++++++++
|
|
include/dt-bindings/clock/bcm-nsp.h | 51 ++++++++++++++
|
|
3 files changed, 188 insertions(+)
|
|
create mode 100644 drivers/clk/bcm/clk-nsp.c
|
|
create mode 100644 include/dt-bindings/clock/bcm-nsp.h
|
|
|
|
--- a/drivers/clk/bcm/Makefile
|
|
+++ b/drivers/clk/bcm/Makefile
|
|
@@ -4,3 +4,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281
|
|
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
|
|
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
|
|
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
|
|
+obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
|
|
+obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
|
|
--- /dev/null
|
|
+++ b/drivers/clk/bcm/clk-nsp.c
|
|
@@ -0,0 +1,135 @@
|
|
+/*
|
|
+ * Copyright (C) 2015 Broadcom Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation version 2.
|
|
+ *
|
|
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
+ * kind, whether express or implied; without even the implied warranty
|
|
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/clk-provider.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/of_address.h>
|
|
+
|
|
+#include <dt-bindings/clock/bcm-nsp.h>
|
|
+#include "clk-iproc.h"
|
|
+
|
|
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
|
|
+
|
|
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
|
|
+ .pwr_shift = ps, .iso_shift = is }
|
|
+
|
|
+#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
|
|
+ .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
|
|
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
|
|
+ .ka_width = kaw }
|
|
+
|
|
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
|
|
+ .hold_shift = hs, .bypass_shift = bs }
|
|
+
|
|
+static void __init nsp_armpll_init(struct device_node *node)
|
|
+{
|
|
+ iproc_armpll_setup(node);
|
|
+}
|
|
+CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init);
|
|
+
|
|
+static const struct iproc_pll_ctrl genpll = {
|
|
+ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
|
|
+ .aon = AON_VAL(0x0, 1, 12, 0),
|
|
+ .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
|
|
+ .ndiv_int = REG_VAL(0x14, 20, 10),
|
|
+ .ndiv_frac = REG_VAL(0x14, 0, 20),
|
|
+ .pdiv = REG_VAL(0x18, 24, 3),
|
|
+ .status = REG_VAL(0x20, 12, 1),
|
|
+};
|
|
+
|
|
+static const struct iproc_clk_ctrl genpll_clk[] = {
|
|
+ [BCM_NSP_GENPLL_PHY_CLK] = {
|
|
+ .channel = BCM_NSP_GENPLL_PHY_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x4, 12, 6, 18),
|
|
+ .mdiv = REG_VAL(0x18, 16, 8),
|
|
+ },
|
|
+ [BCM_NSP_GENPLL_ENET_SW_CLK] = {
|
|
+ .channel = BCM_NSP_GENPLL_ENET_SW_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x4, 13, 7, 19),
|
|
+ .mdiv = REG_VAL(0x18, 8, 8),
|
|
+ },
|
|
+ [BCM_NSP_GENPLL_USB_PHY_REF_CLK] = {
|
|
+ .channel = BCM_NSP_GENPLL_USB_PHY_REF_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x4, 14, 8, 20),
|
|
+ .mdiv = REG_VAL(0x18, 0, 8),
|
|
+ },
|
|
+ [BCM_NSP_GENPLL_IPROCFAST_CLK] = {
|
|
+ .channel = BCM_NSP_GENPLL_IPROCFAST_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x4, 15, 9, 21),
|
|
+ .mdiv = REG_VAL(0x1c, 16, 8),
|
|
+ },
|
|
+ [BCM_NSP_GENPLL_SATA1_CLK] = {
|
|
+ .channel = BCM_NSP_GENPLL_SATA1_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x4, 16, 10, 22),
|
|
+ .mdiv = REG_VAL(0x1c, 8, 8),
|
|
+ },
|
|
+ [BCM_NSP_GENPLL_SATA2_CLK] = {
|
|
+ .channel = BCM_NSP_GENPLL_SATA2_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x4, 17, 11, 23),
|
|
+ .mdiv = REG_VAL(0x1c, 0, 8),
|
|
+ },
|
|
+};
|
|
+
|
|
+static void __init nsp_genpll_clk_init(struct device_node *node)
|
|
+{
|
|
+ iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
|
|
+ ARRAY_SIZE(genpll_clk));
|
|
+}
|
|
+CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init);
|
|
+
|
|
+static const struct iproc_pll_ctrl lcpll0 = {
|
|
+ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
|
|
+ .aon = AON_VAL(0x0, 1, 24, 0),
|
|
+ .reset = RESET_VAL(0x0, 23, 22, 16, 3, 12, 4, 19, 4),
|
|
+ .ndiv_int = REG_VAL(0x4, 20, 8),
|
|
+ .ndiv_frac = REG_VAL(0x4, 0, 20),
|
|
+ .pdiv = REG_VAL(0x4, 28, 3),
|
|
+ .status = REG_VAL(0x10, 12, 1),
|
|
+};
|
|
+
|
|
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
|
|
+ [BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK] = {
|
|
+ .channel = BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x0, 6, 3, 9),
|
|
+ .mdiv = REG_VAL(0x8, 24, 8),
|
|
+ },
|
|
+ [BCM_NSP_LCPLL0_SDIO_CLK] = {
|
|
+ .channel = BCM_NSP_LCPLL0_SDIO_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x0, 7, 4, 10),
|
|
+ .mdiv = REG_VAL(0x8, 16, 8),
|
|
+ },
|
|
+ [BCM_NSP_LCPLL0_DDR_PHY_CLK] = {
|
|
+ .channel = BCM_NSP_LCPLL0_DDR_PHY_CLK,
|
|
+ .flags = IPROC_CLK_AON,
|
|
+ .enable = ENABLE_VAL(0x0, 8, 5, 11),
|
|
+ .mdiv = REG_VAL(0x8, 8, 8),
|
|
+ },
|
|
+};
|
|
+
|
|
+static void __init nsp_lcpll0_clk_init(struct device_node *node)
|
|
+{
|
|
+ iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
|
|
+ ARRAY_SIZE(lcpll0_clk));
|
|
+}
|
|
+CLK_OF_DECLARE(nsp_lcpll0_clk, "brcm,nsp-lcpll0", nsp_lcpll0_clk_init);
|
|
--- /dev/null
|
|
+++ b/include/dt-bindings/clock/bcm-nsp.h
|
|
@@ -0,0 +1,51 @@
|
|
+/*
|
|
+ * BSD LICENSE
|
|
+ *
|
|
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
|
|
+ *
|
|
+ * Redistribution and use in source and binary forms, with or without
|
|
+ * modification, are permitted provided that the following conditions
|
|
+ * are met:
|
|
+ *
|
|
+ * * Redistributions of source code must retain the above copyright
|
|
+ * notice, this list of conditions and the following disclaimer.
|
|
+ * * Redistributions in binary form must reproduce the above copyright
|
|
+ * notice, this list of conditions and the following disclaimer in
|
|
+ * the documentation and/or other materials provided with the
|
|
+ * distribution.
|
|
+ * * Neither the name of Broadcom Corporation nor the names of its
|
|
+ * contributors may be used to endorse or promote products derived
|
|
+ * from this software without specific prior written permission.
|
|
+ *
|
|
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
+ */
|
|
+
|
|
+#ifndef _CLOCK_BCM_NSP_H
|
|
+#define _CLOCK_BCM_NSP_H
|
|
+
|
|
+/* GENPLL clock channel ID */
|
|
+#define BCM_NSP_GENPLL 0
|
|
+#define BCM_NSP_GENPLL_PHY_CLK 1
|
|
+#define BCM_NSP_GENPLL_ENET_SW_CLK 2
|
|
+#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3
|
|
+#define BCM_NSP_GENPLL_IPROCFAST_CLK 4
|
|
+#define BCM_NSP_GENPLL_SATA1_CLK 5
|
|
+#define BCM_NSP_GENPLL_SATA2_CLK 6
|
|
+
|
|
+/* LCPLL0 clock channel ID */
|
|
+#define BCM_NSP_LCPLL0 0
|
|
+#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1
|
|
+#define BCM_NSP_LCPLL0_SDIO_CLK 2
|
|
+#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3
|
|
+
|
|
+#endif /* _CLOCK_BCM_NSP_H */
|