openwrt_archive/target/linux/lantiq/dts/ARV4519PW.dts
John Crispin d5b866bd33 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-02 18:50:18 +00:00

197 lines
3.3 KiB
Plaintext

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV4519PW - Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_green;
failsafe = &power_red;
running = &power_green;
dsl = &dsl;
internet = &internet_green;
usb = &usb;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 0>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
partition@3f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x400>;
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
};
};
etop@E180000 {
phy-mode = "mii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 0>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 0>;
req-mask = <0xf>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 1>;
linux,code = <0xf7>;
};
reset {
label = "reset";
gpios = <&gpio 30 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv4519pw:green:power";
gpios = <&gpio 2 1>;
default-state = "keep";
};
power_red: power2 {
label = "arv4519pw:red:power";
gpios = <&gpio 7 1>;
};
wifi: wifi {
label = "arv4519pw:green:wlan";
gpios = <&gpio 6 1>;
};
dsl: dsl {
label = "arv4519pw:green:dsl";
gpios = <&gpio 4 1>;
};
internet_green: online {
label = "arv4519pw:green:internet";
gpios = <&gpio 5 1>;
};
online2 {
label = "arv4519pw:red:internet";
gpios = <&gpio 8 1>;
};
usb: usb {
label = "arv4519pw:green:usb";
gpios = <&gpio 19 1>;
};
voip {
label = "arv4519pw:green:voip";
gpios = <&gpiomm 0 1>;
};
fxs1 {
label = "arv4519pw:green:phone1";
gpios = <&gpiomm 1 1>;
};
fxs2 {
label = "arv4519pw:green:phone2";
gpios = <&gpiomm 2 1>;
};
fxo {
label = "arv4519pw:green:line";
gpios = <&gpiomm 3 1>;
};
wps2 {
label = "arv4519pw:green:wps";
gpios = <&gpiomm 4 1>;
};
wps {
label = "arv4519pw:orange:wps";
gpios = <&gpiomm 5 1>;
};
wps3 {
label = "arv4519pw:red:wps";
gpios = <&gpiomm 6 1>;
};
};
};