Openwrt/openwrt_archive
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
chaos_calmer
openwrt_archive/package/base-files/image-config.in
John Crispin cf6c81329e CC: version.mk and image-config.in: adjust to 15.05.1 
* Adjust the default version number in include/version.mk to 15.05.1
* Copy the correct download repo location from include/version.mk
  to base-files/image-config.in

After the change to version.mk, new builds made from CC sources will
have opkg config that downloads from the recent 15.05.1 packages repo
instead of the ancient 15.05 packages repo.

The change to image-config.in ensures that if somebody uses
VERSIONOPT config options in .config, he will get the
correct download repo address (instead of trunk snapshots).

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 49053
2016-03-20 14:45:02 +00:00

285 lines
8.9 KiB
Plaintext
Raw Permalink Blame History

# Copyright (C) 2006-2012 OpenWrt.org
# Copyright (C) 2010 Vertical Communications
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
menuconfig PREINITOPT
bool "Preinit configuration options" if IMAGEOPT
default n
help
These options are used to control the environment used to initialize
the system before running init (which typically mean /sbin/init which
switches to multiuser mode).
config TARGET_PREINIT_SUPPRESS_STDERR
bool "Suppress stderr messages during preinit" if PREINITOPT
default y
help
Sends stderr to null during preinit. This is the default behaviour
in previous versions of OpenWrt. This also prevents init process
itself from displaying stderr, however processes launched by init
in multiuser through inittab will use the current terminal (e.g.
the ash shell launched by inittab will display stderr). That's
the same behaviour as seen in previous version of OpenWrt.
config TARGET_PREINIT_TIMEOUT
int
prompt "Failsafe wait timeout" if PREINITOPT
default 2
help
How long to wait for failsafe mode to be entered before
continuing with a regular boot if failsafe not selected.
config TARGET_PREINIT_SHOW_NETMSG
bool
prompt "Show all preinit network messages" if PREINITOPT
default n
help
Show preinit all network messages (via netmsg broadcast), not only
the message indicating to press reset to enter failsafe. Note that
if the architecture doesn't define an interface, and there is no
'Preinit network interface' defined, then no messages will be
emitted, even if this is set.
config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG
bool
prompt "Suppress network message indicating failsafe" if PREINITOPT
default n
help
If "Show all preinit network messages" above is not set, then
setting this option suppresses the only message that would be
emitted otherwise, name the network message to enter failsafe
(via netmsg).
config TARGET_PREINIT_IFNAME
string
prompt "Preinit network interface" if PREINITOPT
default ""
help
Interface for sending preinit messages to network, and any other
default networking in failsafe or preinit. If empty
uses $ifname (if defined in /etc/preinit.arch).
config TARGET_PREINIT_IP
string
prompt "IP address for preinit network messages" if PREINITOPT
default "192.168.1.1"
help
IP address used to configure interface for preinit network
messages, including failsafe messages
config TARGET_PREINIT_NETMASK
string
prompt "Netmask for preinit network messages" if PREINITOPT
default "255.255.255.0"
help
Netmask used to configure interface for preinit network
messages, including failsafes messages
config TARGET_PREINIT_BROADCAST
string
prompt "Broadcast address for preinit network messages" if PREINITOPT
default "192.168.1.255"
help
Broadcast address to which to send preinit network messages, as
as failsafe messages
menuconfig INITOPT
bool "Init configuration options" if IMAGEOPT
default n
help
These option choose the command that will run as the 'init' command
(that is which is responsible for controlling the system once preinit
transfers control to it) as well as some options controlling its
behaviour. Normally init is /sbin/init.
config TARGET_INIT_PATH
string
prompt "PATH for regular boot" if INITOPT
default "/usr/sbin:/usr/bin:/sbin:/bin"
help
Default PATH used during normal operation
config TARGET_INIT_ENV
string
prompt "Environment variables to set when starting init (start with none)" if INITOPT
default ""
help
Should be a space seperated list of variable assignments. These
variables will be present in the environment. Spaces may not be
present (including through expansion) even in a quoted string
(env doesn't understanding quoting).
config TARGET_INIT_CMD
string
prompt "Init command" if INITOPT
default "/sbin/init"
help
The executable to run as the init process. Is 'exec'd by
preinit (which is the init that the kernel launches on boot).
config TARGET_INIT_SUPPRESS_STDERR
bool
prompt "Suppress stderr messages of init" if INITOPT
default y
help
Prevents showing stderr messages for init command if not already
suppressed during preinit. This is the default behaviour in
previous versions of OpenWrt. Removing this does nothing if
stderr is suppressed during preinit (which is the default).
menuconfig VERSIONOPT
bool "Version configuration options" if IMAGEOPT
default n
help
These options allow to override the version information embedded in
the /etc/openwrt_version, /etc/openwrt_release, /etc/banner and
/etc/opkg.conf files. Usually there is no need to set these, but
they're useful for release builds or custom OpenWrt redistributions
that should carry custom version tags.
if VERSIONOPT
config VERSION_DIST
string
prompt "Release distribution"
default "OpenWrt"
help
This is the name of the release distribution.
If unspecified, it defaults to OpenWrt.
config VERSION_NICK
string
prompt "Release version nickname"
help
This is the release codename embedded in the image.
If unspecified, it defaults to the name of source branch.
config VERSION_NUMBER
string
prompt "Release version number"
help
This is the release version number embedded in the image.
If unspecified, it defaults to the svn or git-svn revision
of the build tree.
config VERSION_REPO
string
prompt "Release repository"
default "http://downloads.openwrt.org/%n/%v/%S/packages"
help
This is the repository address embedded in the image, it defaults
to the trunk snapshot repo; the url may contain the following placeholders:
%R .. Revision number
%V .. Release version or revision number, uppercase
%v .. Release version or revision number, lowercase
%C .. Release version or "Bleeding Edge", uppercase
%c .. Release version or "bleeding_edge", lowercase
%N .. Release name, uppercase
%n .. Release name, lowercase
%D .. Distribution name or "OpenWrt", uppercase
%d .. Distribution name or "openwrt", lowercase
%T .. Target name
%S .. Target/Subtarget name
%t .. Build taint flags, e.g. "no-all busybox"
%M .. Manufacturer name or "OpenWrt"
%P .. Product name or "Generic"
%h .. Hardware revision or "v0"
config VERSION_MANUFACTURER
string
prompt "Manufacturer name"
help
This is the manufacturer name embedded in /etc/device_info
Useful for OEMs building OpenWrt based firmware
config VERSION_PRODUCT
string
prompt "Product name"
help
This is the product name embedded in /etc/device_info
Useful for OEMs building OpenWrt based firmware
config VERSION_HWREV
string
prompt "Hardware revision"
help
This is the hardware revision string embedded in /etc/device_info
Useful for OEMs building OpenWrt based firmware
config VERSION_FILENAMES
bool
prompt "Version number in filenames"
default y
help
Enable this to include the version number in firmware image, SDK-
and Image Builder archive file names
endif
menuconfig PER_FEED_REPO
bool "Separate feed repositories" if IMAGEOPT
default y
help
If set, a separate repository is generated within bin/*/packages/
for the core packages and each enabled feed.
config PER_FEED_REPO_ADD_DISABLED
bool "Add available but not enabled feeds to opkg.conf"
default y
depends on PER_FEED_REPO
help
Add not installed or disabled feeds from feeds.conf to opkg.conf.
config PER_FEED_REPO_ADD_COMMENTED
bool "Comment out not enabled feeds"
default y
depends on PER_FEED_REPO && PER_FEED_REPO_ADD_DISABLED
help
Add not enabled feeds as commented out source lines to opkg.conf.
source "tmp/.config-feeds.in"
menuconfig SMIMEOPT
bool "Package signing options" if IMAGEOPT
default n
help
These options configure the signing key and certificate to
be used for signing and verifying packages.
config OPKGSMIME_CERT
string
prompt "Path to certificate (PEM certificate format)" if SMIMEOPT
help
Path to the certificate to use for signature verification
config OPKGSMIME_KEY
string
prompt "Path to signing key (PEM private key format)" if SMIMEOPT
help
Path to the key to use for signing packages
config OPKGSMIME_PASSPHRASE
bool
default y
prompt "Wait for a passphrase when signing packages?" if SMIMEOPT
help
If this value is set, then the build will pause and request a passphrase
from the command line when signing packages. This SHOULD NOT be used with
automatic builds. If this value is not set, a file can be specified from
which the passphrase will be read.
config OPKGSMIME_PASSFILE
string
prompt "Path to a file containing the passphrase" if SMIMEOPT
depends on !OPKGSMIME_PASSPHRASE
help
Path to a file containing the passphrase for the signing key.
If the signing key is not encrypted and does not require a passphrase,
this option may be left blank.
Reference in New Issue View Git Blame Copy Permalink