123 lines
4.0 KiB
Diff
123 lines
4.0 KiB
Diff
Add a new UART I/O type for slow busses such as the ixp4xx expansion bus
|
|
--- a/include/linux/serial_8250.h
|
|
+++ b/include/linux/serial_8250.h
|
|
@@ -27,6 +27,7 @@ struct plat_serial8250_port {
|
|
void *private_data;
|
|
unsigned char regshift; /* register shift */
|
|
unsigned char iotype; /* UPIO_* */
|
|
+ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
|
|
unsigned char hub6;
|
|
upf_t flags; /* UPF_* flags */
|
|
unsigned int type; /* If UPF_FIXED_TYPE */
|
|
--- a/include/linux/serial_core.h
|
|
+++ b/include/linux/serial_core.h
|
|
@@ -324,6 +324,7 @@ struct uart_port {
|
|
#define UPIO_AU (4) /* Au1x00 type IO */
|
|
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
|
#define UPIO_RM9000 (6) /* RM9000 type IO */
|
|
+#define UPIO_MEM_DELAY (7)
|
|
|
|
unsigned int read_status_mask; /* driver specific */
|
|
unsigned int ignore_status_mask; /* driver specific */
|
|
@@ -368,6 +369,7 @@ struct uart_port {
|
|
|
|
unsigned int mctrl; /* current modem ctrl settings */
|
|
unsigned int timeout; /* character-based timeout */
|
|
+ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
|
|
unsigned int type; /* port type */
|
|
const struct uart_ops *ops;
|
|
unsigned int custom_divisor;
|
|
--- a/drivers/tty/serial/8250/8250.c
|
|
+++ b/drivers/tty/serial/8250/8250.c
|
|
@@ -400,6 +400,20 @@ static void mem_serial_out(struct uart_p
|
|
writeb(value, p->membase + offset);
|
|
}
|
|
|
|
+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
|
|
+{
|
|
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
|
|
+ udelay(up->port.rw_delay);
|
|
+ return mem_serial_in(p, offset);
|
|
+}
|
|
+
|
|
+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
|
|
+{
|
|
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
|
|
+ udelay(up->port.rw_delay);
|
|
+ mem_serial_out(p, offset, value);
|
|
+}
|
|
+
|
|
static void mem32_serial_out(struct uart_port *p, int offset, int value)
|
|
{
|
|
offset = map_8250_out_reg(p, offset) << p->regshift;
|
|
@@ -459,6 +473,11 @@ static void set_io_from_upio(struct uart
|
|
p->serial_out = mem32_serial_out;
|
|
break;
|
|
|
|
+ case UPIO_MEM_DELAY:
|
|
+ p->serial_in = memdelay_serial_in;
|
|
+ p->serial_out = memdelay_serial_out;
|
|
+ break;
|
|
+
|
|
case UPIO_AU:
|
|
p->serial_in = au_serial_in;
|
|
p->serial_out = au_serial_out;
|
|
@@ -481,6 +500,7 @@ serial_out_sync(struct uart_8250_port *u
|
|
switch (p->iotype) {
|
|
case UPIO_MEM:
|
|
case UPIO_MEM32:
|
|
+ case UPIO_MEM_DELAY:
|
|
case UPIO_AU:
|
|
p->serial_out(p, offset, value);
|
|
p->serial_in(p, UART_LCR); /* safe, no side-effects */
|
|
@@ -2498,6 +2518,7 @@ static int serial8250_request_std_resour
|
|
case UPIO_TSI:
|
|
case UPIO_MEM32:
|
|
case UPIO_MEM:
|
|
+ case UPIO_MEM_DELAY:
|
|
if (!up->port.mapbase)
|
|
break;
|
|
|
|
@@ -2534,6 +2555,7 @@ static void serial8250_release_std_resou
|
|
case UPIO_TSI:
|
|
case UPIO_MEM32:
|
|
case UPIO_MEM:
|
|
+ case UPIO_MEM_DELAY:
|
|
if (!up->port.mapbase)
|
|
break;
|
|
|
|
@@ -3050,6 +3072,7 @@ static int __devinit serial8250_probe(st
|
|
port.set_termios = p->set_termios;
|
|
port.pm = p->pm;
|
|
port.dev = &dev->dev;
|
|
+ port.rw_delay = p->rw_delay;
|
|
port.irqflags |= irqflag;
|
|
ret = serial8250_register_port(&port);
|
|
if (ret < 0) {
|
|
@@ -3199,6 +3222,7 @@ int serial8250_register_port(struct uart
|
|
uart->port.iotype = port->iotype;
|
|
uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
|
|
uart->port.mapbase = port->mapbase;
|
|
+ uart->port.rw_delay = port->rw_delay;
|
|
uart->port.private_data = port->private_data;
|
|
if (port->dev)
|
|
uart->port.dev = port->dev;
|
|
--- a/drivers/tty/serial/serial_core.c
|
|
+++ b/drivers/tty/serial/serial_core.c
|
|
@@ -2021,6 +2021,7 @@ uart_report_port(struct uart_driver *drv
|
|
snprintf(address, sizeof(address),
|
|
"I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
|
|
break;
|
|
+ case UPIO_MEM_DELAY:
|
|
case UPIO_MEM:
|
|
case UPIO_MEM32:
|
|
case UPIO_AU:
|
|
@@ -2436,6 +2437,7 @@ int uart_match_port(struct uart_port *po
|
|
case UPIO_HUB6:
|
|
return (port1->iobase == port2->iobase) &&
|
|
(port1->hub6 == port2->hub6);
|
|
+ case UPIO_MEM_DELAY:
|
|
case UPIO_MEM:
|
|
case UPIO_MEM32:
|
|
case UPIO_AU:
|