openwrt_archive/target/linux/brcm63xx/patches-3.3/506-board_gw6200_gw6000.patch
Florian Fainelli c6d089a8cd [brcm63xx] nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33156
2012-08-13 09:55:04 +00:00

125 lines
2.2 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -426,6 +426,112 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_gw6200 = {
+ .name = "GW6200",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ .leds = {
+ {
+ .name = "GW6200:green:line1",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "GW6200:green:line2",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "GW6200:green:line3",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "GW6200:green:tel",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 36,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
+static struct board_info __initdata board_gw6000 = {
+ .name = "GW6000",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 6,
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ /* GW6000 has no GPIO-controlled leds */
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 36,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
+
+
static struct board_info __initdata board_FAST2404 = {
.name = "F@ST2404",
.expected_cpu_id = 0x6348,
@@ -1507,6 +1613,8 @@ static const struct board_info __initdat
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,
&board_96348gw,
+ &board_gw6000,
+ &board_gw6200,
&board_96348gw_10,
&board_96348gw_11,
&board_FAST2404,