openwrt_archive/target/linux/brcm47xx/patches-3.3/940-bcm47xx-yenta.patch
Hauke Mehrtens 70f1680675 brcm47xx: add support for kernel 3.3
SVN-Revision: 31573
2012-05-03 20:18:41 +00:00

47 lines
1.6 KiB
Diff

--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
reg = exca_readb(socket, I365_CSCINT);
@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, reg);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
@@ -1257,6 +1264,15 @@ static int __devinit yenta_probe(struct
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */