Gabor Juhos 86396b8450 AA: ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards ... Backport of r39392. On recent TL-WDR4300 boards the external LNAs of the 2.4GHz interface are connected to GPIO lines. Because these GPIO lines are disabled by default, the RX sensitivity of the device is quite bad. Setup the GPIOs of the external LNAs to fix the issue. [Backport note: the 'ath79_wmac_set_ext_lna_gpio' function is not available in AA, use the 'gpio_request_one' instead.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39408		2014-01-28 17:20:08 +00:00
..
base-files	AA: ar71xx: TP-LINK also has a family TL-WDR	2013-09-17 07:12:31 +00:00
files	AA: ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards	2014-01-28 17:20:08 +00:00
generic	AA: ar71xx: create profile and build image for the OpenMesh MR600 board	2012-11-25 16:22:35 +00:00
image	ar71xx: enable building ramdisk images for WZRHPG30XNH board types	2013-03-05 14:48:35 +00:00
nand	ar71xx: register the NAND controller device on the RB2011	2012-09-13 07:26:26 +00:00
patches-3.3	ar71xx: add an external reset callback for ar913x and use it in ath9k	2013-05-19 22:49:09 +00:00
patches-3.6	AA: ar71xx: fix GPIO function selection for AR934x	2012-11-25 16:22:56 +00:00
base-files.mk	[ar71xx] defconfig: remove network config installed by base-files so defconfig can work	2009-02-26 05:54:46 +00:00
config-3.3	AA: ar71xx: add kernel support for the OpenMesh MR600 board	2012-11-25 16:16:12 +00:00
Makefile	[kernel] bump to 3.3.8	2012-06-05 06:57:51 +00:00
modules.mk	ar71xx: package the AR934x NAND driver module	2012-09-13 07:26:23 +00:00