mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-25 20:04:21 +00:00
d62648d58c
Cambium Networks XE3-4 is a tri-radio Wi-Fi 6/6E 4×4/2×2 AP.
Hardware:
Model: Cambium Networks XE3-4
CPU: IPQ6010/AP-CP01-C3, SoC Version: 1.0 @ 800 MHz
Memory: 1 GiB
Flash: 512 MiB Macronix MX30UF2G18AC + W25Q128FW
Ethernet: 1x 1 GbE (QCA8072)
1x 2.5 GbE (QCA8081)
Buttons: 1x Reset
Serial: TX, RX, GND
Baudrate: 115200
Radios: Qualcomm Atheros IPQ6018 802.11ax - 2x2 - 2GHz
Qualcomm Atheros IPQ6018 802.11ax - 2x2 - 5GHz
Qualcomm Atheros QCN9074 802.11ax - 4x4 - 5GHz or 6GHz
BLE 4.1
Power: 32.0W 802.3bt5 PoE++
25.5W 802.3at with USB, BT disabled
Size: 215mm x 215mm
Ports: 1x USB 2.0
Antenna: 6 GHz: 6.29 dBi, Omni 30 dBm
5 GHz: 6.12 dBi, Omni 31 dBm
2.4 GHz: 4.85 dBi, Omni 29 dBm
LEDs: Multi-color status LEDs
Mounting: Wall, ceiling or T-bar
Installation: Serial connection
1. Open the AP to get access to the board. Connect RX, TX and GND.
2. Power on the AP, and short the CS pin of the SPI flash with
one of the APs GND pins.
3. Transfer the initramfs image with TFTP
(Default server IP is 192.168.0.120)
# tftpboot factory.ubi
4. Flash the rootfs partition
# flash rootfs
5. Reboot the AP
# reset
Signed-off-by: Kristian Skramstad <kristian+github@83.no>
Link: https://github.com/openwrt/openwrt/pull/15633
Signed-off-by: Robert Marko <robimarko@gmail.com>
60 lines
2.5 KiB
Bash
60 lines
2.5 KiB
Bash
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv head'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0;
|
|
}
|
|
|
|
|
|
yuncore_fap650_env_setup() {
|
|
local ubifile=$(board_name)
|
|
local active=$(fw_printenv -n owrt_slotactive)
|
|
[ -z "$active" ] && active=$(hexdump -s 0x94 -n 4 -e '4 "%d"' /dev/mtd$(find_mtd_index 0:bootconfig))
|
|
cat > /tmp/env_tmp << EOF
|
|
owrt_slotactive=${active}
|
|
owrt_bootcount=0
|
|
bootfile=${ubifile}.ubi
|
|
owrt_bootcountcheck=if test \$owrt_bootcount > 4; then run owrt_tftprecover; fi; if test \$owrt_bootcount = 3; then run owrt_slotswap; else echo bootcountcheck successfull; fi
|
|
owrt_bootinc=if test \$owrt_bootcount < 5; then echo save env part; setexpr owrt_bootcount \${owrt_bootcount} + 1 && saveenv; else echo save env skipped; fi; echo current bootcount: \$owrt_bootcount
|
|
bootcmd=run owrt_bootinc && run owrt_bootcountcheck && run owrt_slotselect && run owrt_bootlinux
|
|
owrt_bootlinux=echo booting linux... && ubi part fs && ubi read 0x44000000 kernel && bootm; reset
|
|
owrt_setslot0=setenv bootargs console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:rootfs rootfstype=squashfs rootwait swiotlb=1 && setenv mtdparts mtdparts=nand0:0x3c00000@0(fs)
|
|
owrt_setslot1=setenv bootargs console=ttyMSM0,115200n8 ubi.mtd=rootfs_1 root=mtd:rootfs rootfstype=squashfs rootwait swiotlb=1 && setenv mtdparts mtdparts=nand0:0x3c00000@0x3c00000(fs)
|
|
owrt_slotswap=setexpr owrt_slotactive 1 - \${owrt_slotactive} && saveenv && echo slot swapped. new active slot: \$owrt_slotactive
|
|
owrt_slotselect=setenv mtdids nand0=nand0,nand1=spi0.0; if test \$owrt_slotactive = 0; then run owrt_setslot0; else run owrt_setslot1; fi
|
|
owrt_tftprecover=echo trying to recover firmware with tftp... && sleep 10 && dhcp && flash rootfs && flash rootfs_1 && setenv owrt_bootcount 0 && setenv owrt_slotactive 0 && saveenv && reset
|
|
owrt_env_ver=7
|
|
EOF
|
|
fw_setenv --script /tmp/env_tmp
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
case "$(board_name)" in
|
|
cambiumnetworks,xe3-4)
|
|
fw_setenv bootcount 0
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
netgear,wax214)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
yuncore,fap650)
|
|
[ "$(fw_printenv -n owrt_env_ver 2>/dev/null)" != "7" ] && yuncore_fap650_env_setup
|
|
local active="$(fw_printenv -n owrt_slotactive 2>/dev/null)"
|
|
if [ "$active" = "1" ]; then
|
|
CI_UBIPART="rootfs"
|
|
else
|
|
CI_UBIPART="rootfs_1"
|
|
fi
|
|
fw_setenv owrt_bootcount 0
|
|
fw_setenv owrt_slotactive $((1 - active))
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|