0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2025-02-24 16:28:46 +00:00
openwrt/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts
Robert Marko 27b441cbaf ipq40xx: drop ESSEDMA + AR40xx DTS nodes
In order to start working on IPQESS + DSA drop
the old ESSEDMA + AR40xx DTS nodes.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2022-10-02 23:04:38 +02:00

90 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qcom-ipq4019-x1pro.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Telco X1 Pro";
compatible = "tel,x1pro","qcom,ipq4019";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
broken-flash-reset;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
art: partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x180000 0x1e80000>;
};
};
};
};