mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2025-02-24 16:28:46 +00:00
1a49b499f1
Remove ess-psgmii@98000, edma@c080000 and ess-switch@c000000 nodes. These nodes are not used after the DSA conversion, but were left over in a few devices added recently. ZTE MF289F is omitted on purpose, as for it, these nodes will be removed together with DSA conversion. Build tested only, as I only have MF286D from those devices. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
449 lines
7.4 KiB
Plaintext
449 lines
7.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "ZTE MF286D";
|
|
compatible = "zte,mf286d";
|
|
|
|
aliases {
|
|
led-boot = &led_internal;
|
|
led-failsafe = &led_internal;
|
|
led-running = &led_internal;
|
|
led-upgrade = &led_internal;
|
|
};
|
|
|
|
chosen {
|
|
/*
|
|
* bootargs forced by u-boot bootipq command:
|
|
* 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
|
|
*/
|
|
bootargs-append = " root=/dev/ubiblock0_1";
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_internal: led-0 {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
|
|
label = "blue:internal_led";
|
|
default-state = "keep";
|
|
};
|
|
|
|
led-1 {
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
wifi {
|
|
label = "wifi";
|
|
linux,code = <KEY_RFKILL>;
|
|
gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
rng@22000 {
|
|
status = "okay";
|
|
};
|
|
|
|
mdio@90000 {
|
|
status = "okay";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <2000>;
|
|
};
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
/* select hostmode */
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
status = "okay";
|
|
};
|
|
|
|
ess_tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
|
|
usb2@60f8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@8af8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
crypto@8e3a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog@b017000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_spi1 {
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
|
|
|
flash@0 {
|
|
/* u-boot is looking for "n25q128a11" property */
|
|
compatible = "jedec,spi-nor", "n25q128a11";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:SBL1";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "0:MIBIB";
|
|
reg = <0x40000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "0:QSEE";
|
|
reg = <0x60000 0x60000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c0000 {
|
|
label = "0:CDT";
|
|
reg = <0xc0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@d0000 {
|
|
label = "0:DDRPARAMS";
|
|
reg = <0xd0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "0:APPSBLENV";
|
|
reg = <0xe0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f0000 {
|
|
label = "0:APPSBL";
|
|
reg = <0xf0000 0xc0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1b0000 {
|
|
label = "0:reserved1";
|
|
reg = <0x1b0000 0x50000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
pinctrl-0 = <&serial_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
status = "okay";
|
|
nvmem-cell-names = "mac-address";
|
|
nvmem-cells = <&macaddr_config_0>;
|
|
};
|
|
|
|
&nand {
|
|
pinctrl-0 = <&nand_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "fota-flag";
|
|
reg = <0x0 0xa0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@a0000 {
|
|
label = "ART";
|
|
reg = <0xa0000 0x80000>;
|
|
read-only;
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
precal_art_1000: precal@1000 {
|
|
reg = <0x1000 0x2f20>;
|
|
};
|
|
|
|
precal_art_5000: precal@5000 {
|
|
reg = <0x5000 0x2f20>;
|
|
};
|
|
};
|
|
|
|
partition@120000 {
|
|
label = "mac";
|
|
reg = <0x120000 0x80000>;
|
|
read-only;
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_config_0: macaddr@0 {
|
|
reg = <0x0 0x6>;
|
|
};
|
|
};
|
|
|
|
partition@1a0000 {
|
|
label = "reserved2";
|
|
reg = <0x1a0000 0xc0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@260000 {
|
|
label = "cfg-param";
|
|
reg = <0x260000 0x400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@660000 {
|
|
label = "log";
|
|
reg = <0x660000 0x400000>;
|
|
};
|
|
|
|
partition@a60000 {
|
|
label = "oops";
|
|
reg = <0xa60000 0xa0000>;
|
|
};
|
|
|
|
partition@b00000 {
|
|
label = "reserved3";
|
|
reg = <0xb00000 0x500000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1000000 {
|
|
label = "web";
|
|
reg = <0x1000000 0x800000>;
|
|
};
|
|
|
|
partition@1800000 {
|
|
label = "rootfs";
|
|
reg = <0x1800000 0x1d00000>;
|
|
};
|
|
|
|
partition@3500000 {
|
|
label = "data";
|
|
reg = <0x3500000 0x1900000>;
|
|
};
|
|
|
|
partition@4e00000 {
|
|
label = "fota";
|
|
reg = <0x4e00000 0x3200000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
};
|
|
|
|
&swport2 {
|
|
status = "okay";
|
|
|
|
label = "lan4";
|
|
};
|
|
|
|
&swport3 {
|
|
status = "okay";
|
|
|
|
label = "lan3";
|
|
};
|
|
|
|
&swport4 {
|
|
status = "okay";
|
|
|
|
label = "lan2";
|
|
};
|
|
|
|
&swport5 {
|
|
status = "okay";
|
|
|
|
nvmem-cell-names = "mac-address";
|
|
nvmem-cells = <&macaddr_config_0>;
|
|
mac-address-increment = <1>;
|
|
};
|
|
|
|
&tlmm {
|
|
i2c_0_pins: i2c_0_pinmux {
|
|
mux {
|
|
pins = "gpio20", "gpio21";
|
|
function = "blsp_i2c0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
mdio_pins: mdio_pinmux {
|
|
mux_1 {
|
|
pins = "gpio6";
|
|
function = "mdio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux_2 {
|
|
pins = "gpio7";
|
|
function = "mdc";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
nand_pins: nand_pins {
|
|
pullups {
|
|
pins = "gpio52", "gpio53", "gpio58",
|
|
"gpio59";
|
|
function = "qpic";
|
|
bias-pull-up;
|
|
};
|
|
|
|
pulldowns {
|
|
pins = "gpio54", "gpio55", "gpio56",
|
|
"gpio57", "gpio60",
|
|
"gpio62", "gpio63", "gpio64",
|
|
"gpio65", "gpio66", "gpio67",
|
|
"gpio69";
|
|
function = "qpic";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
serial_pins: serial_pinmux {
|
|
mux {
|
|
pins = "gpio16", "gpio17";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi_0_pinmux {
|
|
pinmux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio13", "gpio14", "gpio15";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinmux_cs {
|
|
function = "gpio";
|
|
pins = "gpio12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb2_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_ss_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi0 {
|
|
status = "okay";
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>;
|
|
mac-address-increment = <2>;
|
|
qcom,ath10k-calibration-variant = "zte,mf286d";
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>;
|
|
mac-address-increment = <3>;
|
|
qcom,ath10k-calibration-variant = "zte,mf286d";
|
|
};
|