openwrt/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
	model = "Pakedge WR-1";
	compatible = "pakedge,wr-1";

	aliases {
		label-mac-device = &gmac;
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
	};

	keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&key_pins>;
		pinctrl-names = "default";

		reset {
			label = "reset";
			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		led_power: power {
			label = "blue:power";
			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_POWER;
		};

		wlan2g {
			label = "blue:wlan2g";
			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_WLAN;
			linux,default-trigger = "phy0tpt";
		};

		wlan5g {
			label = "blue:wlan5g";
			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_WLAN;
			linux,default-trigger = "phy1tpt";
		};
	};

	soc {
		tcsr@1949000 {
			compatible = "qcom,tcsr";
			reg = <0x1949000 0x100>;
			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
		};

		tcsr@194b000 {
			compatible = "qcom,tcsr";
			reg = <0x194b000 0x100>;
			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
		};

		ess_tcsr@1953000 {
			compatible = "qcom,tcsr";
			reg = <0x1953000 0x1000>;
			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
		};

		tcsr@1957000 {
			compatible = "qcom,tcsr";
			reg = <0x1957000 0x100>;
			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
		};
	};
};

&blsp_dma {
	status = "okay";
};

&blsp1_spi1 {
	status = "okay";

	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
	pinctrl-0 = <&spi_0_pins>;
	pinctrl-names = "default";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <24000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "0:SBL1";
				reg = <0x0000000 0x0040000>;
				read-only;
			};

			partition@40000 {
				label = "0:MIBIB";
				reg = <0x0040000 0x0020000>;
				read-only;
			};

			partition@60000 {
				label = "0:QSEE";
				reg = <0x0060000 0x0060000>;
				read-only;
			};

			partition@c0000 {
				label = "0:CDT";
				reg = <0x00c0000 0x0010000>;
				read-only;
			};

			partition@d0000 {
				label = "0:DDRPARAMS";
				reg = <0x00d0000 0x0010000>;
				read-only;
			};

			partition@e0000 {
				label = "0:APPSBLENV";
				reg = <0x00e0000 0x0010000>;
				read-only;
			};

			partition@f0000 {
				label = "0:APPSBL";
				reg = <0x00f0000 0x0080000>;
				read-only;
			};

			partition@170000 {
				label = "0:ART";
				reg = <0x0170000 0x0010000>;
				read-only;
			};

			partition@180000 {
				label = "firmware";
				reg = <0x0180000 0x1e80000>;
			};
		};
	};
};

&blsp1_uart1 {
	status = "okay";

	pinctrl-0 = <&serial_pins>;
	pinctrl-names = "default";
};

&crypto {
	status = "okay";
};

&cryptobam {
	status = "okay";
};

&gmac {
	status = "okay";
};

&mdio {
	status = "okay";
};

&prng {
	status = "okay";
};

&switch {
	status = "okay";
};

&swport1 {
	status = "okay";

	label = "lan4";
};

&swport2 {
	status = "okay";

	label = "lan3";
};

&swport3 {
	status = "okay";

	label = "lan2";
};

&swport4 {
	status = "okay";

	label = "lan1";
};

&swport5 {
	status = "okay";
};

&tlmm {
	key_pins: key_pinmux {
		mux {
			function = "gpio";
			pins = "gpio59";
			bias-pull-up;
		};
	};

	led_pins: led_pinmux {
		mux {
			function = "gpio";
			pins = "gpio0", "gpio1", "gpio2";
			bias-none;
			drive-strength = <2>;
			output-low;
		};
	};

	serial_pins: serial_pinmux {
		mux {
			function = "blsp_uart0";
			pins = "gpio60", "gpio61";
			bias-disable;
		};
	};

	spi_0_pins: spi_0_pinmux {
		mux {
			function = "blsp_spi0";
			pins = "gpio55", "gpio56", "gpio57";
			bias-disable;
			drive-strength = <12>;
		};

		mux_cs {
			function = "gpio";
			pins = "gpio54";
			bias-disable;
			drive-strength = <2>;
			output-high;
		};
	};
};

&usb2 {
	status = "okay";
};

&usb2_hs_phy {
	status = "okay";
};

&watchdog {
	status = "okay";
};

&wifi0 {
	status = "okay";

	qcom,ath10k-calibration-variant = "Pakedge-WR-1";
};

&wifi1 {
	status = "okay";

	qcom,ath10k-calibration-variant = "Pakedge-WR-1";
};