mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-22 04:56:15 +00:00
487ca61f91
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.61 Manually rebased: bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> Link: https://github.com/openwrt/openwrt/pull/16959 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
658 lines
14 KiB
Diff
658 lines
14 KiB
Diff
From 1a5c8d307c83c808a32686ed51afb4bac2092d39 Mon Sep 17 00:00:00 2001
|
|
From: Jonas Karlman <jonas@kwiboo.se>
|
|
Date: Tue, 21 May 2024 20:28:05 +0000
|
|
Subject: [PATCH] arm64: dts: rockchip: Add Radxa ZERO 3W/3E
|
|
|
|
The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
|
|
computer based on the Rockchip RK3566, with a compact form factor and
|
|
rich interfaces.
|
|
|
|
The ZERO 3W and ZERO 3E are basically the same size and model, but
|
|
differ only in storage and network interfaces.
|
|
|
|
- eMMC (3W)
|
|
- SD-card (both)
|
|
- Ethernet (3E)
|
|
- WiFi/BT (3W)
|
|
|
|
Add initial support for eMMC, SD-card, Ethernet, HDMI and USB.
|
|
|
|
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
Link: https://lore.kernel.org/r/20240521202810.1225636-3-jonas@kwiboo.se
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/Makefile | 2 +
|
|
.../dts/rockchip/rk3566-radxa-zero-3.dtsi | 463 ++++++++++++++++++
|
|
.../dts/rockchip/rk3566-radxa-zero-3e.dts | 51 ++
|
|
.../dts/rockchip/rk3566-radxa-zero-3w.dts | 91 ++++
|
|
4 files changed, 607 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
@@ -81,6 +81,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pi
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
|
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero-3e.dtb
|
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero-3w.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
|
@@ -0,0 +1,463 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/leds/common.h>
|
|
+#include <dt-bindings/soc/rockchip,vop2.h>
|
|
+#include "rk3566.dtsi"
|
|
+
|
|
+/ {
|
|
+ aliases {
|
|
+ mmc0 = &sdmmc0;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial2:1500000n8";
|
|
+ };
|
|
+
|
|
+ hdmi-con {
|
|
+ compatible = "hdmi-connector";
|
|
+ type = "d";
|
|
+
|
|
+ port {
|
|
+ hdmi_con_in: endpoint {
|
|
+ remote-endpoint = <&hdmi_out_con>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&user_led2>;
|
|
+
|
|
+ led-green {
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ default-state = "on";
|
|
+ function = LED_FUNCTION_HEARTBEAT;
|
|
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_1v8: regulator-1v8-vcc {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc_1v8";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ vin-supply = <&vcc_1v8_p>;
|
|
+ };
|
|
+
|
|
+ vcca_1v8: regulator-1v8-vcca {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcca_1v8";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ vin-supply = <&vcc_1v8_p>;
|
|
+ };
|
|
+
|
|
+ vcca1v8_image: regulator-1v8-vcca-image {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcca1v8_image";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ vin-supply = <&vcc_1v8_p>;
|
|
+ };
|
|
+
|
|
+ vcc_3v3: regulator-3v3-vcc {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc_3v3";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
+ };
|
|
+
|
|
+ vcc_sys: regulator-5v0-vcc-sys {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&combphy1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu1 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu2 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu3 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&gpu {
|
|
+ mali-supply = <&vdd_gpu_npu>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&hdmi {
|
|
+ avdd-0v9-supply = <&vdda_0v9>;
|
|
+ avdd-1v8-supply = <&vcca1v8_image>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&hdmi_in {
|
|
+ hdmi_in_vp0: endpoint {
|
|
+ remote-endpoint = <&vp0_out_hdmi>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&hdmi_out {
|
|
+ hdmi_out_con: endpoint {
|
|
+ remote-endpoint = <&hdmi_con_in>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&hdmi_sound {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ status = "okay";
|
|
+
|
|
+ rk817: pmic@20 {
|
|
+ compatible = "rockchip,rk817";
|
|
+ reg = <0x20>;
|
|
+ #clock-cells = <1>;
|
|
+ clock-output-names = "rk817-clkout1", "rk817-clkout2";
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pmic_int_l>;
|
|
+ system-power-controller;
|
|
+ wakeup-source;
|
|
+
|
|
+ vcc1-supply = <&vcc_sys>;
|
|
+ vcc2-supply = <&vcc_sys>;
|
|
+ vcc3-supply = <&vcc_sys>;
|
|
+ vcc4-supply = <&vcc_sys>;
|
|
+ vcc5-supply = <&vcc_sys>;
|
|
+ vcc6-supply = <&vcc_sys>;
|
|
+ vcc7-supply = <&vcc_sys>;
|
|
+ vcc8-supply = <&vcc_sys>;
|
|
+ vcc9-supply = <&vcc5v_midu>;
|
|
+
|
|
+ regulators {
|
|
+ vdd_logic: DCDC_REG1 {
|
|
+ regulator-name = "vdd_logic";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ regulator-suspend-microvolt = <900000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_gpu_npu: DCDC_REG2 {
|
|
+ regulator-name = "vdd_gpu_npu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
+ regulator-name = "vcc_ddr";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc3v3_sys: DCDC_REG4 {
|
|
+ regulator-name = "vcc3v3_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcca1v8_pmu: LDO_REG1 {
|
|
+ regulator-name = "vcca1v8_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda_0v9: LDO_REG2 {
|
|
+ regulator-name = "vdda_0v9";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda0v9_pmu: LDO_REG3 {
|
|
+ regulator-name = "vdda0v9_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <900000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vccio_acodec: LDO_REG4 {
|
|
+ regulator-name = "vccio_acodec";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vccio_sd: LDO_REG5 {
|
|
+ regulator-name = "vccio_sd";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc3v3_pmu: LDO_REG6 {
|
|
+ regulator-name = "vcc3v3_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_1v8_p: LDO_REG7 {
|
|
+ regulator-name = "vcc_1v8_p";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc1v8_dvp: LDO_REG8 {
|
|
+ regulator-name = "vcc1v8_dvp";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc2v8_dvp: LDO_REG9 {
|
|
+ regulator-name = "vcc2v8_dvp";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <2800000>;
|
|
+ regulator-max-microvolt = <2800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc5v_midu: BOOST {
|
|
+ regulator-name = "vcc5v_midu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vbus: OTG_SWITCH {
|
|
+ regulator-name = "vbus";
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_cpu: regulator@40 {
|
|
+ compatible = "rockchip,rk8600";
|
|
+ reg = <0x40>;
|
|
+ fcs,suspend-voltage-selector = <1>;
|
|
+ regulator-name = "vdd_cpu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <712500>;
|
|
+ regulator-max-microvolt = <1390000>;
|
|
+ regulator-ramp-delay = <2300>;
|
|
+ vin-supply = <&vcc_sys>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2s0_8ch {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ leds {
|
|
+ user_led2: user-led2 {
|
|
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pmic {
|
|
+ pmic_int_l: pmic-int-l {
|
|
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pmu_io_domains {
|
|
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
+ pmuio2-supply = <&vcca1v8_pmu>;
|
|
+ vccio1-supply = <&vccio_acodec>;
|
|
+ vccio2-supply = <&vcc_1v8>;
|
|
+ vccio3-supply = <&vccio_sd>;
|
|
+ vccio4-supply = <&vcc_1v8>;
|
|
+ vccio5-supply = <&vcc_3v3>;
|
|
+ vccio6-supply = <&vcc_3v3>;
|
|
+ vccio7-supply = <&vcc_3v3>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ vref-supply = <&vcca_1v8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdmmc0 {
|
|
+ bus-width = <4>;
|
|
+ cap-sd-highspeed;
|
|
+ disable-wp;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
+ vmmc-supply = <&vcc3v3_sys>;
|
|
+ vqmmc-supply = <&vccio_sd>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&tsadc {
|
|
+ rockchip,hw-tshut-mode = <1>;
|
|
+ rockchip,hw-tshut-polarity = <0>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_xhci {
|
|
+ dr_mode = "peripheral";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_xhci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2phy0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2phy0_host {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2phy0_otg {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vop {
|
|
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vop_mmu {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vp0 {
|
|
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
+ remote-endpoint = <&hdmi_in_vp0>;
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
|
|
@@ -0,0 +1,51 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "rk3566-radxa-zero-3.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Radxa ZERO 3E";
|
|
+ compatible = "radxa,zero-3e", "rockchip,rk3566";
|
|
+
|
|
+ aliases {
|
|
+ ethernet0 = &gmac1;
|
|
+ };
|
|
+};
|
|
+
|
|
+&gmac1 {
|
|
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
|
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
|
+ clock_in_out = "input";
|
|
+ phy-handle = <&rgmii_phy1>;
|
|
+ phy-mode = "rgmii-id";
|
|
+ phy-supply = <&vcc_3v3>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&gmac1m1_miim
|
|
+ &gmac1m1_tx_bus2
|
|
+ &gmac1m1_rx_bus2
|
|
+ &gmac1m1_rgmii_clk
|
|
+ &gmac1m1_rgmii_bus
|
|
+ &gmac1m1_clkinout>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mdio1 {
|
|
+ rgmii_phy1: ethernet-phy@1 {
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
+ reg = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&gmac1_rstn>;
|
|
+ reset-assert-us = <20000>;
|
|
+ reset-deassert-us = <50000>;
|
|
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ gmac1 {
|
|
+ gmac1_rstn: gmac1-rstn {
|
|
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts
|
|
@@ -0,0 +1,91 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "rk3566-radxa-zero-3.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Radxa ZERO 3W";
|
|
+ compatible = "radxa,zero-3w", "rockchip,rk3566";
|
|
+
|
|
+ aliases {
|
|
+ mmc1 = &sdhci;
|
|
+ mmc2 = &sdmmc1;
|
|
+ };
|
|
+
|
|
+ sdio_pwrseq: sdio-pwrseq {
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
+ clocks = <&rk817 1>;
|
|
+ clock-names = "ext_clock";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&wifi_reg_on_h>;
|
|
+ post-power-on-delay-ms = <100>;
|
|
+ power-off-delay-us = <5000000>;
|
|
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ bluetooth {
|
|
+ bt_reg_on_h: bt-reg-on-h {
|
|
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
+ bt_wake_host_h: bt-wake-host-h {
|
|
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
+ host_wake_bt_h: host-wake-bt-h {
|
|
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ wifi {
|
|
+ wifi_reg_on_h: wifi-reg-on-h {
|
|
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
+ wifi_wake_host_h: wifi-wake-host-h {
|
|
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&sdhci {
|
|
+ bus-width = <8>;
|
|
+ cap-mmc-highspeed;
|
|
+ max-frequency = <200000000>;
|
|
+ mmc-hs200-1_8v;
|
|
+ no-sd;
|
|
+ no-sdio;
|
|
+ non-removable;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
|
+ vmmc-supply = <&vcc_3v3>;
|
|
+ vqmmc-supply = <&vcc_1v8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdmmc1 {
|
|
+ bus-width = <4>;
|
|
+ cap-sd-highspeed;
|
|
+ cap-sdio-irq;
|
|
+ keep-power-in-suspend;
|
|
+ mmc-pwrseq = <&sdio_pwrseq>;
|
|
+ no-mmc;
|
|
+ no-sd;
|
|
+ non-removable;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
|
+ sd-uhs-sdr104;
|
|
+ vmmc-supply = <&vcc_3v3>;
|
|
+ vqmmc-supply = <&vcc_1v8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
|
+ uart-has-rtscts;
|
|
+ status = "okay";
|
|
+};
|