0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-22 04:56:15 +00:00
openwrt/target/linux/ramips/dts/mt7628an_wavlink_wl-wn576a2.dts
Shiji Yang 01996b785d ramips: clean up useless dts partition labels
The previous NVMEM eeprom conversions[1][2] left a lot of partition
labels that were no longer used. They can be removed now.

[1] https://github.com/openwrt/openwrt/pull/13584
[2] https://github.com/openwrt/openwrt/pull/13587

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-21 13:31:18 +01:00

198 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "wavlink,wl-wn576a2", "mediatek,mt7628an-soc";
model = "Wavlink WL-WN576A2";
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
repeater {
label = "repeater";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
};
leds {
compatible = "gpio-leds";
wifi-high {
label = "blue:wifi-high";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
wifi-mediumhigh {
label = "blue:wifi-mediumhigh";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wifi-medium {
label = "blue:wifi-medium";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
wifi-mediumlow {
label = "blue:wifi-mediumlow";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
wifi-low {
label = "blue:wifi-low";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led_wps: wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
};
&state_default {
gpio {
groups = "i2c", "i2s", "wdt", "wled_an", "p0led_an", "p1led_an",
"p2led_an", "p3led_an", "p4led_an", "refclk", "gpio";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&wmac {
status = "okay";
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
&ethernet {
nvmem-cells = <&macaddr_factory_28>;
nvmem-cells-names = "max-address";
};
&esw {
mediatek,portmap = <0x3f>;
};
&usbphy {
status = "disabled";
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};