0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-22 04:56:15 +00:00
openwrt/target/linux/ramips/dts/mt7621_telco-electronics_x1.dts
Shiji Yang 01996b785d ramips: clean up useless dts partition labels
The previous NVMEM eeprom conversions[1][2] left a lot of partition
labels that were no longer used. They can be removed now.

[1] https://github.com/openwrt/openwrt/pull/13584
[2] https://github.com/openwrt/openwrt/pull/13587

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-21 13:31:18 +01:00

217 lines
3.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "telco-electronics,x1", "mediatek,mt7621-soc";
model = "Telco Electronics X1";
aliases {
led-boot = &system_led;
led-failsafe = &system_led;
led-running = &system_led;
led-upgrade = &system_led;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
system_led: system {
label = "green:system";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
modem_offline {
label = "red:modem-offline";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
};
modem_4g {
label = "blue:modem-4g";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
modem_3g {
label = "green:modem-3g";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
};
modem_rssi_lowest {
label = "green:modem-rssi-lowest";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
modem_rssi_low {
label = "green:modem-rssi-low";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
modem_rssi_medium {
label = "green:modem-rssi-medium";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
modem_rssi_high {
label = "green:modem-rssi-high";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
};
modem_rssi_highest {
label = "green:modem-rssi-highest";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <14000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_e006: macaddr@e006 {
compatible = "mac-base";
reg = <0xe006 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&ethernet {
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e006 0>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
port@4 {
status = "okay";
label = "wan";
nvmem-cells = <&macaddr_factory_e006 1>;
nvmem-cell-names = "mac-address";
};
};
};
&state_default {
gpio {
groups = "wdt", "rgmii2";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "pci14c3,7603";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
};
};
};