0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-25 06:26:15 +00:00
openwrt/target/linux/ramips/dts/mt7621_mqmaker_witi.dts
Shiji Yang 01996b785d ramips: clean up useless dts partition labels
The previous NVMEM eeprom conversions[1][2] left a lot of partition
labels that were no longer used. They can be removed now.

[1] https://github.com/openwrt/openwrt/pull/13584
[2] https://github.com/openwrt/openwrt/pull/13587

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-21 13:31:18 +01:00

175 lines
2.6 KiB
Plaintext

#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "mqmaker,witi", "mediatek,mt7621-soc";
model = "MQmaker WiTi";
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&i2c {
status = "okay";
rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&sdhci {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_e000: macaddr@e000 {
compatible = "mac-base";
reg = <0xe000 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000 0>;
nvmem-cell-names = "eeprom", "mac-address";
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <2400000 2500000>;
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000 0>;
nvmem-cell-names = "eeprom", "mac-address";
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e000 0>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan2";
phy-mode = "rgmii-rxid";
phy-handle = <&ethphy5>;
nvmem-cells = <&macaddr_factory_e000 1>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy5: ethernet-phy@5 {
reg = <5>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
port@4 {
status = "okay";
label = "wan1";
nvmem-cells = <&macaddr_factory_e000 1>;
nvmem-cell-names = "mac-address";
};
};
};
&state_default {
gpio {
groups = "wdt";
function = "gpio";
};
};