0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-22 04:56:15 +00:00
openwrt/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts
Shiji Yang 238aa35c49 ramips: improve support for HiWiFi HC5861 SDHC
1. Override max clock frequency to a stable value 24 MHz.
2. Use voltage regulator to control the power supply.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-07-11 18:57:42 +02:00

120 lines
1.8 KiB
Plaintext

#include "mt7620a_hiwifi_hc5x61.dtsi"
/ {
compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
model = "HiWiFi HC5861";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "blue:system";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
internet {
label = "blue:internet";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "blue:wlan5g";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
turbo {
label = "blue:turbo";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <0>;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
mediatek,portmap = "llllw";
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,ephy-base = /bits/ 8 <12>;
};
&mmc_reg_3v3 {
/delete-property/ enable-active-high;
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};
&sdhci {
max-frequency = <24000000>;
};
&wmac {
pinctrl-names = "default", "pa_gpio";
pinctrl-0 = <&pa_pins>;
pinctrl-1 = <&pa_gpio_pins>;
};