openwrt/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1

RAMFS_COPY_BIN='fw_printenv fw_setenv head'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'

xiaomi_initramfs_prepare() {
	# Wipe UBI if running initramfs
	[ "$(rootfs_type)" = "tmpfs" ] || return 0

	local rootfs_mtdnum="$( find_mtd_index rootfs )"
	if [ ! "$rootfs_mtdnum" ]; then
		echo "unable to find mtd partition rootfs"
		return 1
	fi

	local kern_mtdnum="$( find_mtd_index ubi_kernel )"
	if [ ! "$kern_mtdnum" ]; then
		echo "unable to find mtd partition ubi_kernel"
		return 1
	fi

	ubidetach -m "$rootfs_mtdnum"
	ubiformat /dev/mtd$rootfs_mtdnum -y

	ubidetach -m "$kern_mtdnum"
	ubiformat /dev/mtd$kern_mtdnum -y
}

asus_initial_setup() {
	# Remove existing linux and jffs2 volumes
	[ "$(rootfs_type)" = "tmpfs" ] || return 0

	ubirmvol /dev/ubi0 -N linux
	ubirmvol /dev/ubi0 -N jffs2
}

remove_oem_ubi_volume() {
	local oem_volume_name="$1"
	local oem_ubivol
	local mtdnum
	local ubidev

	mtdnum=$(find_mtd_index "$CI_UBIPART")
	if [ ! "$mtdnum" ]; then
		return
	fi

	ubidev=$(nand_find_ubi "$CI_UBIPART")
	if [ ! "$ubidev" ]; then
		ubiattach --mtdn="$mtdnum"
		ubidev=$(nand_find_ubi "$CI_UBIPART")
	fi

	if [ "$ubidev" ]; then
		oem_ubivol=$(nand_find_volume "$ubidev" "$oem_volume_name")
		[ "$oem_ubivol" ] && ubirmvol "/dev/$ubidev" --name="$oem_volume_name"
	fi
}

tplink_get_boot_part() {
	local cur_boot_part
	local args

	# Try to find rootfs from kernel arguments
	read -r args < /proc/cmdline
	for arg in $args; do
		local ubi_mtd_arg=${arg#ubi.mtd=}
		case "$ubi_mtd_arg" in
		rootfs|rootfs_1)
			echo "$ubi_mtd_arg"
			return
		;;
		esac
	done

	# Fallback to u-boot env (e.g. when running initramfs)
	cur_boot_part="$(/usr/sbin/fw_printenv -n tp_boot_idx)"
	case $cur_boot_part in
	1)
		echo rootfs_1
		;;
	0|*)
		echo rootfs
		;;
	esac
}

tplink_do_upgrade() {
	local new_boot_part

	case $(tplink_get_boot_part) in
	rootfs)
		CI_UBIPART="rootfs_1"
		new_boot_part=1
	;;
	rootfs_1)
		CI_UBIPART="rootfs"
		new_boot_part=0
	;;
	esac

	fw_setenv -s - <<-EOF
		tp_boot_idx $new_boot_part
	EOF

	remove_oem_ubi_volume ubi_rootfs
	nand_do_upgrade "$1"
}

platform_check_image() {
	return 0;
}

platform_pre_upgrade() {
	case "$(board_name)" in
	asus,rt-ax89x)
		asus_initial_setup
		;;
	redmi,ax6|\
	xiaomi,ax3600|\
	xiaomi,ax9000)
		xiaomi_initramfs_prepare
		;;
	esac
}

platform_do_upgrade() {
	case "$(board_name)" in
	arcadyan,aw1000|\
	cmcc,rm2-6|\
	compex,wpq873|\
	dynalink,dl-wrx36|\
	edimax,cax1800|\
	netgear,rax120v2|\
	netgear,sxr80|\
	netgear,sxs80|\
	netgear,wax218|\
	netgear,wax620|\
	netgear,wax630)
		nand_do_upgrade "$1"
		;;
	asus,rt-ax89x)
		CI_UBIPART="UBI_DEV"
		CI_KERNPART="linux"
		CI_ROOTPART="jffs2"
		nand_do_upgrade "$1"
		;;
	buffalo,wxr-5950ax12)
		CI_KERN_UBIPART="rootfs"
		CI_ROOT_UBIPART="user_property"
		buffalo_upgrade_prepare
		nand_do_flash_file "$1" || nand_do_upgrade_failed
		nand_do_restore_config || nand_do_upgrade_failed
		buffalo_upgrade_optvol
		;;
	edgecore,eap102)
		active="$(fw_printenv -n active)"
		if [ "$active" -eq "1" ]; then
			CI_UBIPART="rootfs2"
		else
			CI_UBIPART="rootfs1"
		fi
		# force altbootcmd which handles partition change in u-boot
		fw_setenv bootcount 3
		fw_setenv upgrade_available 1
		nand_do_upgrade "$1"
		;;
	linksys,mx4200v1|\
	linksys,mx4200v2|\
	linksys,mx5300|\
	linksys,mx8500)
		boot_part="$(fw_printenv -n boot_part)"
		if [ "$boot_part" -eq "1" ]; then
			fw_setenv boot_part 2
			CI_KERNPART="alt_kernel"
			CI_UBIPART="alt_rootfs"
		else
			fw_setenv boot_part 1
			CI_UBIPART="rootfs"
		fi
		fw_setenv boot_part_ready 3
		fw_setenv auto_recovery yes
		nand_do_upgrade "$1"
		;;
	prpl,haze|\
	qnap,301w)
		CI_KERNPART="0:HLOS"
		CI_ROOTPART="rootfs"
		emmc_do_upgrade "$1"
		;;
	redmi,ax6|\
	xiaomi,ax3600|\
	xiaomi,ax9000)
		# Make sure that UART is enabled
		fw_setenv boot_wait on
		fw_setenv uart_en 1

		# Enforce single partition.
		fw_setenv flag_boot_rootfs 0
		fw_setenv flag_last_success 0
		fw_setenv flag_boot_success 1
		fw_setenv flag_try_sys1_failed 8
		fw_setenv flag_try_sys2_failed 8

		# Kernel and rootfs are placed in 2 different UBI
		CI_KERN_UBIPART="ubi_kernel"
		CI_ROOT_UBIPART="rootfs"
		nand_do_upgrade "$1"
		;;
	spectrum,sax1v1k)
		CI_KERNPART="0:HLOS"
		CI_ROOTPART="rootfs"
		CI_DATAPART="rootfs_data"
		emmc_do_upgrade "$1"
		;;
	tplink,eap660hd-v1)
		tplink_do_upgrade "$1"
		;;
	yuncore,ax880)
		active="$(fw_printenv -n active)"
		if [ "$active" -eq "1" ]; then
			CI_UBIPART="rootfs_1"
		else
			CI_UBIPART="rootfs"
		fi
		# force altbootcmd which handles partition change in u-boot
		fw_setenv bootcount 3
		fw_setenv upgrade_available 1
		nand_do_upgrade "$1"
		;;
	zbtlink,zbt-z800ax)
		local mtdnum="$(find_mtd_index 0:bootconfig)"
		local alt_mtdnum="$(find_mtd_index 0:bootconfig1)"
		part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$mtdnum | cut -f 1 -d "|" | head -n1)"
		# vendor firmware may swap the rootfs partition location, u-boot append: ubi.mtd=rootfs
		# since we use fixed-partitions, need to force boot from the first rootfs partition
		if [ "$part_num" -eq "1" ]; then
			mtd erase /dev/mtd$mtdnum
			mtd erase /dev/mtd$alt_mtdnum
		fi
		nand_do_upgrade "$1"
		;;
	zte,mf269)
		CI_KERN_UBIPART="ubi_kernel"
		CI_ROOT_UBIPART="rootfs"
		nand_do_upgrade "$1"
		;;
	zyxel,nbg7815)
		local config_mtdnum="$(find_mtd_index 0:bootconfig)"
		[ -z "$config_mtdnum" ] && reboot
		part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
		if [ "$part_num" -eq "0" ]; then
			CI_KERNPART="0:HLOS"
			CI_ROOTPART="rootfs"
		else
			CI_KERNPART="0:HLOS_1"
			CI_ROOTPART="rootfs_1"
		fi
		emmc_do_upgrade "$1"
		;;
	*)
		default_do_upgrade "$1"
		;;
	esac
}

platform_copy_config() {
	case "$(board_name)" in
	prpl,haze|\
	qnap,301w|\
	spectrum,sax1v1k|\
	zyxel,nbg7815)
		emmc_copy_config
		;;
	esac
}