0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-22 04:56:15 +00:00
openwrt/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom
George Witt 9b33645566 ipq807x: add support for TP-Link EAP660 HD v1
Specifications:
* SoC: Qualcomm IPQ8072A (64-bit Quad-core Arm Cortex-A53 @ 2200MHz)
* Memory: 2x ESMT M15T4G16256A-DEBG2G (1 GiB DDR3-1866 13-13-13)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: QCN5054 (4x4 5 GHz 802.11ax)
* Wi-Fi: QCN5024 (4x4 2.4 GHz 802.11b/g/n/ax)
* Ethernet: QCA8081 (10/100/1000/2.5GBASE-T)
* Flash: Winbond W29N01HZSINF (128 MiB)
* LEDs: 1x Blue Status (GPIO 42 Active High)
* Buttons: 1x Reset (GPIO 50 Active Low)

Installation Instructions (Serial+TFTP):
1. Solder 4 pin header to JP1 and bridge pads of R58 and R62.
2. Connect 3V3 TTL port to TX, RX, and GND, which are positions 1, 2,
   and 3 respectively. Be sure to crossover TX and RX.
3. Copy RAM firmware image
   openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-initramfs-uImage.itb
   to TFTP server root, available at 192.168.10.1.
4. Connect PoE ethernet cable to the RJ45 port and hold Ctrl+B in the
   serial console (115200 baud) until autoboot is halted.
5. Run the following commands in the U-boot prompt:
   # tftpboot 0x44000000 openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-initramfs-uImage.itb
   # bootm
   You may need to type Ctrl+C and Enter before running these commands
   to clear invisible characters from the buffer.
6. Run the following command in a terminal to copy the sysupgrade image
   to be installed (check IP address):
   $ scp openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
7. Activate the OpenWrt serial console and run the following commands:
   # cd /tmp
   # sysupgrade -n openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-squashfs-sysupgrade.bin
8. The AP will reboot and OpenWrt will be successfully installed.

Signed-off-by: George Witt <george.witt@nltsproject.org>
Link: https://github.com/openwrt/openwrt/pull/15832
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-09-08 12:01:19 +02:00
..
ipq6010-mango-dvk.dts qualcommax: set phy-mode to sgmii for QCA8081 2024-03-18 22:17:20 +01:00
ipq6010-wax214.dts qualcommax: ipq60xx: add support for netgear wax214 2024-03-05 06:34:35 +01:00
ipq6010-xe3-4.dts qualcommax: ipq60xx: add support for Cambium Networks XE3-4 2024-08-08 22:57:22 +02:00
ipq6018-512m.dtsi qualcommax: ipq60xx: add yuncore fap650 support 2024-04-04 09:29:17 +02:00
ipq6018-cp-cpu.dtsi qualcommax: add ipq60xx support 2024-02-09 14:01:51 +01:00
ipq6018-cpr-regulator.dtsi qualcommax: add ipq60xx support 2024-02-09 14:01:51 +01:00
ipq6018-ess.dtsi qualcommax: ipq60xx: set PHY mode to psgmii for port 5 2024-03-18 22:17:20 +01:00
ipq6018-fap650.dts qualcommax: ipq60xx: add yuncore fap650 support 2024-04-04 09:29:17 +02:00
ipq6018-fixed-smps.dtsi qualcommax: ipq60xx: add support for Cambium Networks XE3-4 2024-08-08 22:57:22 +02:00
ipq8070-cax1800.dts qualcommax: convert qca807x PHY to PHY package implementation 2024-02-11 21:13:42 +01:00
ipq8070-rm2-6.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
ipq8071-ax6.dts ipq807x: rename target to qualcommax 2023-06-16 11:11:08 +02:00
ipq8071-ax3600.dts qualcommax: apply special PHY LEDs configuration for Xiaomi AX3600 2024-02-11 21:13:50 +01:00
ipq8071-ax3600.dtsi qualcommax: convert qca807x PHY to PHY package implementation 2024-02-11 21:13:42 +01:00
ipq8071-eap102.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
ipq8071-mf269.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
ipq8072-301w.dts qualcommax: ipq807x: fix LEDs on QNAP QHora-301W 2024-03-17 17:31:02 +01:00
ipq8072-aw1000.dts qualcommax: AW1000: add qca8081 PHY LED configuration 2024-02-16 13:50:19 +01:00
ipq8072-ax880.dts qualcommax: ipq807x: uboot-envtools: yuncore ax880 2024-04-30 13:51:15 +02:00
ipq8072-ax9000.dts qualcommax: set phy-mode to sgmii for QCA8081 2024-03-18 22:17:20 +01:00
ipq8072-dl-wrx36.dts qualcommax: convert qca807x PHY to PHY package implementation 2024-02-11 21:13:42 +01:00
ipq8072-eap660hd-v1.dts ipq807x: add support for TP-Link EAP660 HD v1 2024-09-08 12:01:19 +02:00
ipq8072-haze.dts qualcommax: ipq807x: correct PHY mode for AQR 2024-02-17 17:39:22 +01:00
ipq8072-mx5300.dts qualcommax: dts: cleanup whitespace 2024-03-18 22:17:20 +01:00
ipq8072-mx8500.dts qualcommax: ipq807x: add support for Linksys MX8500 2024-05-16 20:27:36 +02:00
ipq8072-sax1v1k.dts qualcommax: ipq807x: sax1v1k: fix QCA8081 reset 2024-05-21 20:15:03 +02:00
ipq8072-wax218.dts qualcommax: convert to new LED color/function format where possible 2024-02-07 14:48:43 +01:00
ipq8072-wax620.dts qualcommax: ipq807x: wax620 and wax630: fix wifi mac address 2024-06-13 11:01:59 +02:00
ipq8072-wpq873.dts qualcommax: dts: cleanup whitespace 2024-03-18 22:17:20 +01:00
ipq8072-zbt-z800ax.dts qualcommax: ipq807x: fix sysupgrade for ZBT-Z800AX 2024-06-13 18:01:03 +02:00
ipq8074-512m.dtsi ipq807x: rename target to qualcommax 2023-06-16 11:11:08 +02:00
ipq8074-ac-cpu.dtsi qualcommax: dts: cleanup whitespace 2024-03-18 22:17:20 +01:00
ipq8074-cpr-regulator.dtsi ipq807x: rename target to qualcommax 2023-06-16 11:11:08 +02:00
ipq8074-ess.dtsi qualcommax: ipq8074-ess: move switch to ess-instance node 2024-07-09 12:33:17 +02:00
ipq8074-hk-cpu.dtsi qualcommax: dts: cleanup whitespace 2024-03-18 22:17:20 +01:00
ipq8074-nbg7815.dts qualcommax: set phy-mode to sgmii for QCA8081 2024-03-18 22:17:20 +01:00
ipq8074-rax120v2.dts qualcommax: fix RAX120v2 PWM Fan controller wrong definition 2024-06-25 12:52:44 +02:00
ipq8074-rt-ax89x.dts qualcommax: ipq807x: add Asus RT-AX89X BX revision 2024-07-09 12:33:17 +02:00
ipq8074-sxk80.dtsi qualcommax: ipq807x support Netgear Orbi Pro SXK80 2024-05-22 14:51:36 +02:00
ipq8074-sxr80.dts qualcommax: ipq807x support Netgear Orbi Pro SXK80 2024-05-22 14:51:36 +02:00
ipq8074-sxs80.dts qualcommax: ipq807x support Netgear Orbi Pro SXK80 2024-05-22 14:51:36 +02:00
ipq8074-wax630.dts qualcommax: dts: cleanup whitespace 2024-03-18 22:17:20 +01:00
ipq8074-wxr-5950ax12.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
ipq8174-mx4200.dtsi qualcommax: ipq807x: MX4200 convert qca807x PHY to new implementation 2024-02-15 18:30:23 +01:00
ipq8174-mx4200v1.dts ipq807x: fix whitespace usage 2024-01-15 16:52:08 +01:00
ipq8174-mx4200v2.dts ipq807x: add support for Linksys MX4200 V1 and V2 2024-01-06 16:13:23 +01:00