mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-22 13:06:14 +00:00
3fda16078b
This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
37 lines
526 B
Bash
Executable File
37 lines
526 B
Bash
Executable File
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
platform_check_image() {
|
|
case "$(board_name)" in
|
|
watchguard,firebox-m300)
|
|
legacy_sdcard_check_image "$1"
|
|
;;
|
|
*)
|
|
return 0
|
|
;;
|
|
esac
|
|
}
|
|
|
|
platform_copy_config() {
|
|
case "$(board_name)" in
|
|
watchguard,firebox-m300)
|
|
legacy_sdcard_copy_config "$1"
|
|
;;
|
|
*)
|
|
return 0
|
|
esac
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
case "$(board_name)" in
|
|
watchguard,firebox-m300)
|
|
legacy_sdcard_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|