mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-22 04:56:15 +00:00
d1954aa535
According to RTL8221B's datasheet, the PHY requires at least 10ms
for assert and 68ms (recommended) for de-assert. So increase the
assert/de-assert time to 15ms and 68ms respectively.
Fixes: c0c3234e1720 ("mediatek: add support for JDCloud RE-CP-03")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/16106
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
346 lines
6.2 KiB
Plaintext
346 lines
6.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright (C) 2023 Tianling Shen <cnsztl@immortalwrt.org>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "JDCloud RE-CP-03";
|
|
compatible = "jdcloud,re-cp-03", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
led-boot = &red_led;
|
|
led-failsafe = &red_led;
|
|
led-running = &green_led;
|
|
led-upgrade = &green_led;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
bootargs-override = "root=/dev/fit0 rootwait";
|
|
stdout-path = "serial0:115200n8";
|
|
rootdisk = <&emmc_rootdisk>;
|
|
};
|
|
|
|
memory@40000000 {
|
|
reg = <0 0x40000000 0 0x40000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-joylink {
|
|
label = "joylink";
|
|
linux,code = <BTN_0>;
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button-reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
red_led: led-1 {
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
green_led: led-2 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
nvmem-cells = <&macaddr_factory_2a 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy6>;
|
|
|
|
nvmem-cells = <&macaddr_factory_24 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <15000>;
|
|
reset-deassert-us = <68000>;
|
|
realtek,aldps-enable;
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
hs400-ds-delay = <0x14014>;
|
|
max-frequency = <200000000>;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
status = "okay";
|
|
|
|
card@0 {
|
|
compatible = "mmc-card";
|
|
reg = <0>;
|
|
|
|
block {
|
|
compatible = "block-device";
|
|
|
|
partitions {
|
|
block-partition-factory {
|
|
partname = "factory";
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
macaddr_factory_24: macaddr@24 {
|
|
compatible = "mac-base";
|
|
reg = <0x24 0x6>;
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
|
|
macaddr_factory_2a: macaddr@2a {
|
|
compatible = "mac-base";
|
|
reg = <0x2a 0x6>;
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
emmc_rootdisk: block-partition-production {
|
|
partname = "production";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
mmc0_pins_default: mmc0-pins-default {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>;
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>;
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>;
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0-uhs-pins {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>;
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>;
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>;
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>;
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf-2g-5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
nvmem-cells = <&eeprom_factory_0>;
|
|
nvmem-cell-names = "eeprom";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
status = "okay";
|
|
};
|