mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-25 06:26:15 +00:00
b6d8297510
Specification SoC: MediaTek MT7622A (2x Cortex-A53) RAM: NANYA NT5CC256M16ER-EK (512 MiB) MMC: Kioxia THGBMNG5D1LBAIT (4 GiB) ETH0: Intel/MaxLinear GPY211 (2500M/1000M/100M/10M) ETH1: Lantiq/Intel/MaxLinear PEF7071/GPY111 (1000M/100M/10M) WLAN0: MediaTek MT7915E + MT7975D 2T2R 802.11bgn/ax (2.4G) 2T2R 802.11an/ac/ax (5G L) WLAN1: MediaTek MT7915E + MT7975A 4T4R 802.11an/ac/ax (5G H) BT: BT5 provided by MT7915E+MT7975D (missing firmware) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
519 lines
9.0 KiB
Plaintext
519 lines
9.0 KiB
Plaintext
/*
|
|
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
* Copyright (c) 2018-2023 MediaTek Inc.
|
|
* Authors: Daniel Golle <daniel@makrotopia.org>
|
|
* Chad Monroe <chad.monroe@adtran.com>
|
|
* Ryder Lee <ryder.lee@mediatek.com>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7622.dtsi"
|
|
#include "mt6380.dtsi"
|
|
|
|
/ {
|
|
model = "Adtran SmartRG 841-t6";
|
|
compatible = "smartrg,sdg-841-t6", "mediatek,mt7622";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac1;
|
|
label-mac-device = &gmac0;
|
|
led-boot = &sys_status_blue;
|
|
led-failsafe = &sys_status_blue;
|
|
led-running = &sys_status_white;
|
|
led-upgrade = &sys_status_blue;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512 root=PARTLABEL=res1";
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
proc-supply = <&mt6380_vcpu_reg>;
|
|
sram-supply = <&mt6380_vm_reg>;
|
|
};
|
|
|
|
cpu@1 {
|
|
proc-supply = <&mt6380_vcpu_reg>;
|
|
sram-supply = <&mt6380_vm_reg>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
wifi2g {
|
|
label = "wifi2g";
|
|
gpios = <&pio 96 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy0radio";
|
|
};
|
|
|
|
wifi5g-1 {
|
|
label = "wifi5g";
|
|
gpios = <&pio 97 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy1radio";
|
|
};
|
|
|
|
wifi5g-2 {
|
|
label = "wifi5g2";
|
|
gpios = <&pio 98 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy2radio";
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&pio 99 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x0 0x40000000 0x0 0x40000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/delete-node/ramoops@42ff0000;
|
|
|
|
bootdata@45000000 {
|
|
no-map;
|
|
reg = <0x0 0x45000000 0x0 0x00001000>;
|
|
};
|
|
|
|
ramoops_reserved: ramoops1@45001000 {
|
|
no-map;
|
|
compatible = "ramoops";
|
|
reg = <0x0 0x45001000 0x0 0x00140000>;
|
|
ftrace-size = <0x20000>;
|
|
record-size = <0x20000>;
|
|
console-size = <0x20000>;
|
|
pmsg-size = <0x80000>;
|
|
};
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð_pins>;
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
label = "wan";
|
|
|
|
nvmem-cells = <&macaddr 0x0>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
phy-handle = <&phy5>;
|
|
phy-mode = "2500base-x";
|
|
phy-connection-type = "2500base-x";
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
label = "lan";
|
|
|
|
nvmem-cells = <&macaddr 0x1>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii-rxid";
|
|
rx-internal-delay-ps = <2000>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
/* PEF7071 */
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_LAN;
|
|
};
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = LED_FUNCTION_LAN;
|
|
};
|
|
};
|
|
};
|
|
|
|
phy5: ethernet-phy@5 {
|
|
/* GPY211 */
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
|
|
system-leds@30 {
|
|
compatible = "srg,sysled";
|
|
reg = <0x30>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sys_status_blue: system_blue@3 {
|
|
label = "blue";
|
|
reg = <3>;
|
|
};
|
|
|
|
sys_status_white: system_white@4 {
|
|
label = "white";
|
|
reg = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&emmc_pins_default>;
|
|
pinctrl-1 = <&emmc_pins_uhs>;
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
max-frequency = <50000000>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
|
|
non-removable;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
card@0 {
|
|
compatible = "mmc-card";
|
|
reg = <0>;
|
|
|
|
block {
|
|
partitions {
|
|
block-partition-nvram {
|
|
partnum = <3>;
|
|
partname = "nvram";
|
|
|
|
nvmem-layout {
|
|
compatible = "u-boot,env";
|
|
};
|
|
};
|
|
|
|
block-partition-rf {
|
|
partnum = <4>;
|
|
partname = "rf";
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom0: eeprom@0 {
|
|
reg = <0x0 0x5000>;
|
|
};
|
|
|
|
eeprom1: eeprom@5000 {
|
|
reg = <0x5000 0x5000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
block-partition-mfginfo {
|
|
partnum = <7>;
|
|
partname = "mfginfo";
|
|
|
|
nvmem-layout {
|
|
compatible = "adtran,mfginfo";
|
|
|
|
macaddr: mfg-mac {
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&slot0 {
|
|
mt7915@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0000 0 0 0 0>;
|
|
nvmem-cells = <&eeprom0>;
|
|
nvmem-cell-names = "eeprom";
|
|
ieee80211-freq-limit = <2400000 5330000>;
|
|
|
|
band@0 {
|
|
/* 2.4 GHz */
|
|
reg = <0>;
|
|
nvmem-cells = <&macaddr 0x4>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
band@1 {
|
|
/* lower 5 GHz */
|
|
reg = <1>;
|
|
nvmem-cells = <&macaddr 0xa>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&slot1 {
|
|
mt7915@0,0 {
|
|
/* upper 5 GHz */
|
|
reg = <0x0000 0 0 0 0>;
|
|
nvmem-cells = <&eeprom1>, <&macaddr 0xf>;
|
|
nvmem-cell-names = "eeprom", "mac-address";
|
|
ieee80211-freq-limit = <5490000 5835000>;
|
|
rdd_antenna = <0x02>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
/* eMMC is shared pin with parallel NAND */
|
|
emmc_pins_default: emmc-pins-default {
|
|
mux {
|
|
function = "emmc", "emmc_rst";
|
|
groups = "emmc";
|
|
};
|
|
|
|
/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
|
|
* "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
|
|
* DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
|
|
*/
|
|
conf-cmd-dat {
|
|
pins = "NDL0", "NDL1", "NDL2",
|
|
"NDL3", "NDL4", "NDL5",
|
|
"NDL6", "NDL7", "NRB";
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
conf-clk {
|
|
pins = "NCLE";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
emmc_pins_uhs: emmc-pins-uhs {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc";
|
|
};
|
|
|
|
conf-cmd-dat {
|
|
pins = "NDL0", "NDL1", "NDL2",
|
|
"NDL3", "NDL4", "NDL5",
|
|
"NDL6", "NDL7", "NRB";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
conf-clk {
|
|
pins = "NCLE";
|
|
drive-strength = <4>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
eth_pins: eth-pins {
|
|
mux {
|
|
function = "eth";
|
|
groups = "mdc_mdio", "rgmii_via_gmac2";
|
|
};
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
mux {
|
|
function = "i2c";
|
|
groups = "i2c0";
|
|
};
|
|
};
|
|
|
|
pcie0_pins: pcie0-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie0_pad_perst",
|
|
"pcie0_1_waken",
|
|
"pcie0_1_clkreq";
|
|
};
|
|
};
|
|
|
|
pcie1_pins: pcie1-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie1_pad_perst";
|
|
};
|
|
};
|
|
|
|
pmic_bus_pins: pmic-bus-pins {
|
|
mux {
|
|
function = "pmic";
|
|
groups = "pmic_bus";
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart0_0_tx_rx" ;
|
|
};
|
|
};
|
|
|
|
uart3_pins: uart3-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart3_1_tx_rx" ;
|
|
};
|
|
};
|
|
|
|
watchdog_pins: watchdog-pins {
|
|
mux {
|
|
function = "watchdog";
|
|
groups = "watchdog";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwrap {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_bus_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "mediatek,mt7915-bluetooth";
|
|
vcc-supply = <®_5v>;
|
|
pinctrl-names = "runtime";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
boot-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
|
|
current-speed = <921600>;
|
|
};
|
|
};
|
|
|
|
&watchdog {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&watchdog_pins>;
|
|
status = "okay";
|
|
};
|