Openwrt/openwrt
0
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-25 06:26:15 +00:00
Code Issues Releases Activity
main
openwrt/target/linux/kirkwood/image/Makefile
Goetz Goerisch 3774f3272e treewide: rename ZyXEL to Zyxel 
The company Zyxel rebranded some years ago.
Currently the casing is according to the old branding even
for newer devices which already use the new branding.

This commit aligns the casing of Zyxel everywhere.

Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15652
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-25 15:08:25 +02:00

403 lines
12 KiB
Makefile
Raw Permalink Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2009-2013 OpenWrt.org
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR:=0x8000
# Some info about Ctera firmware:
# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
# 2. It contains two images: kernel and romdisk. Both are required.
# 3. Every image has header and trailer file.
# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
# 5. In header file are some strings used to describe image. It was decoded from
# factory image.
# 6. Version format in header file is restricted by Original FW.
# 7. Trailer file contains MD5 sum string of header and image file.
# 8. Firmware file must have <=24MB size.
define Build/ctera-firmware
mkdir -p $@.tmp
# Prepare header and trailer file for kernel
echo "# CTera firmware information file" > $@.tmp/header
echo "image_type=kernel" >> $@.tmp/header
echo "arch=Kirkwood" >> $@.tmp/header
echo "board=Any" >> $@.tmp/header
echo "version=3.1.22.30669" >> $@.tmp/header
echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
>> $@.tmp/header
cp $@ $@.tmp/kernel
echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
> $@.tmp/trailer
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-H gnu -C $@.tmp -cf $@.tar header kernel trailer
# Prepare header and trailer file for fake romdisk
echo "# CTera firmware information file" > $@.tmp/header
echo "image_type=romdisk" >> $@.tmp/header
echo "initrd=yes" >> $@.tmp/header
echo "arch=Kirkwood" >> $@.tmp/header
echo "board=Any" >> $@.tmp/header
echo "version=3.1.22.30669" >> $@.tmp/header
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
>> $@.tmp/header
rm -f $@
touch $@
$(call Build/append-uImage-fakehdr, ramdisk)
cp $@ $@.tmp/romdisk
echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
> $@.tmp/trailer
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-H gnu -C $@.tmp -rf $@.tar header romdisk trailer
mv $@.tar $@
rm -rf $@.tmp
endef
define Device/kernel-size-migration-iomega
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := \n$\
!The partitioning of the router has changed! \n$\
Partition design has changed compared to \
older versions (up to 23.05) due to kernel size restrictions. \
Upgrade via sysupgrade mechanism is not possible, so new \
installation via initramfs image is required.\n$\
Please adjust bootcmd in u-boot console:\n$\
setenv bootcmd \
'setenv bootargs $$$${console} $$$${mtdparts} $$$${bootargs_root}; \
nand read.e 0x800000 0x100000 0x400000; bootm 0x00800000'\n$\
saveenv\n$\
or use OpenWrt shell:\n$\
fw_setenv bootcmd \
"setenv bootargs $$$${console} $$$${mtdparts} $$$${bootargs_root};\
nand read.e 0x800000 0x100000 0x400000; bootm 0x00800000"\n$\
and reinstall image with initramfs image. \
Please see original instructions for more details.
endef
define Device/kernel-size-migration-linksys
DEVICE_COMPAT_VERSION := 3.0
DEVICE_COMPAT_MESSAGE := \n$\
!The partitioning of the router has changed! \n$\
Partition design has changed compared to \
older versions (up to 23.05) due to kernel size restrictions. \n$\
Upgrade via sysupgrade mechanism is not possible, so u-boot args \
adjustment and new installation via factory style image is required. \n$\
Upgrade instructions: \n$\
2. Run folowing commands in console (ssh or serial): \n$\
\t fw_printenv \n$\
\t fw_setenv nandboot \
"$$$$(fw_printenv nandboot | awk -F= '{sub(/^nandboot=/, "");print}' \
| sed 's/0x300000/0x400000/g')"\n$\
\t fw_setenv altnandboot \
"$$$$(fw_printenv altnandboot | awk -F= '{sub(/^altnandboot=/, "");print}' \
| sed 's/0x300000/0x400000/g')"\n$\
3. Test if envs are ok by 'fw_printenv'. \
It should be the same except last argument of\
'nand read.e' in 'nandboot' and 'altnandboot'.\n$\
4. If envs are ok, please apply FACTORY image with command:\n$\
\t sysupgrade -F -n OPENWRT_FACTORY_IMAGE.bin \n$\
5. System should start normally. If not, serial console will be required.
endef
define Device/Default
PROFILES := Default
DEVICE_DTS_DIR := $(DTS_DIR)/marvell
DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL := kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
KERNEL_SUFFIX := -uImage
KERNEL_IN_UBI := 1
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-ubi
endef
define Device/checkpoint_l-50
DEVICE_VENDOR := Check Point
DEVICE_MODEL := L-50
DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-mbedtls
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += checkpoint_l-50
define Device/cisco_on100
DEVICE_VENDOR := Cisco Systems
DEVICE_MODEL := ON100
KERNEL_SIZE := 5376k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
SUPPORTED_DEVICES += on100
endef
TARGET_DEVICES += cisco_on100
define Device/cloudengines_pogoe02
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug E02
DEVICE_DTS := kirkwood-pogo_e02
DEVICE_PACKAGES := kmod-rtc-mv
SUPPORTED_DEVICES += pogo_e02
endef
TARGET_DEVICES += cloudengines_pogoe02
define Device/cloudengines_pogoplugv4
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug V4
DEVICE_DTS := kirkwood-pogoplug-series-4
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
kmod-gpio-button-hotplug kmod-rtc-mv
endef
TARGET_DEVICES += cloudengines_pogoplugv4
define Device/ctera_c200-v1
DEVICE_VENDOR := Ctera
DEVICE_MODEL := C200
DEVICE_VARIANT := V1
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
KERNEL_IN_UBI :=
KERNEL_SUFFIX := -factory.firm
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += ctera_c200-v1
define Device/dlink_dns320l
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DNS-320L
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug \
kmod-usb-storage kmod-usb-ledtrig-usbport dns320l-mcu kmod-rtc-mv
endef
TARGET_DEVICES += dlink_dns320l
define Device/endian_4i-edge-200
DEVICE_VENDOR := Endian
DEVICE_MODEL := 4i Edge 200
DEVICE_ALT0_VENDOR := Endian
DEVICE_ALT0_MODEL := UTM Mini Firewall
DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-mbedtls kmod-rtc-mv
KERNEL_SIZE := 4096k
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += endian_4i-edge-200
define Device/globalscale_sheevaplug
DEVICE_VENDOR := Globalscale
DEVICE_MODEL := Sheevaplug
DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
endef
TARGET_DEVICES += globalscale_sheevaplug
define Device/iom_iconnect-1.1
DEVICE_VENDOR := Iomega
DEVICE_MODEL := Iconnect
DEVICE_PACKAGES := kmod-rtc-mv
DEVICE_DTS := kirkwood-iconnect
SUPPORTED_DEVICES += iconnect
endef
TARGET_DEVICES += iom_iconnect-1.1
define Device/iom_ix2-200
$(Device/kernel-size-migration-iomega)
DEVICE_VENDOR := Iomega
DEVICE_MODEL := StorCenter ix2-200
DEVICE_DTS := kirkwood-iomega_ix2_200
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm63 kmod-rtc-mv
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 4096k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE_SIZE := 31744k
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
endef
TARGET_DEVICES += iom_ix2-200
define Device/iom_ix4-200d
$(Device/kernel-size-migration-iomega)
DEVICE_VENDOR := Iomega
DEVICE_MODEL := StorCenter ix4-200d
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \
kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio kmod-rtc-mv
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 4096k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE_SIZE := 31744k
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
endef
TARGET_DEVICES += iom_ix4-200d
define Device/iptime_nas1
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := NAS1
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-gpio-pca953x kmod-hwmon-drivetemp \
kmod-hwmon-gpiofan kmod-usb-ledtrig-usbport kmod-rtc-mv kmod-thermal \
-uboot-envtools
KERNEL := $$(KERNEL) | iptime-naspkg nas1
BLOCKSIZE := 256k
IMAGE_SIZE := 15872k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
endef
TARGET_DEVICES += iptime_nas1
define Device/linksys
$(Device/kernel-size-migration-linksys)
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-mwl8k wpad-basic-mbedtls kmod-gpio-button-hotplug \
kmod-rtc-mv
KERNEL_IN_UBI :=
KERNEL_SIZE := 4096k
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
endef
define Device/linksys_e4200-v2
$(Device/linksys)
DEVICE_MODEL := E4200
DEVICE_VARIANT := v2
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_e4200-v2
define Device/linksys_ea3500
$(Device/linksys)
DEVICE_MODEL := EA3500
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
SUPPORTED_DEVICES += linksys,audi linksys-audi
endef
TARGET_DEVICES += linksys_ea3500
define Device/linksys_ea4500
$(Device/linksys)
DEVICE_MODEL := EA4500
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_ea4500
define Device/netgear_readynas-duo-v2
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := ReadyNAS Duo
DEVICE_VARIANT := v2
DEVICE_DTS := kirkwood-netgear_readynas_duo_v2
KERNEL_IN_UBI :=
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3
endef
TARGET_DEVICES += netgear_readynas-duo-v2
define Device/netgear_stora
DEVICE_VENDOR := Netgear
DEVICE_MODEL := Stora (MS2000/2110)
DEVICE_DTS := kirkwood-stora
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-rtc-pcf8563 kmod-hwmon-lm75 kmod-hwmon-tc654 \
kmod-gpio-button-hotplug
endef
TARGET_DEVICES += netgear_stora
define Device/raidsonic_ib-nas62x0
DEVICE_VENDOR := RaidSonic
DEVICE_MODEL := ICY BOX IB-NAS62x0
DEVICE_DTS := kirkwood-ib62x0
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
SUPPORTED_DEVICES += ib62x0
endef
TARGET_DEVICES += raidsonic_ib-nas62x0
define Device/seagate_blackarmor-nas220
DEVICE_VENDOR := Seagate
DEVICE_MODEL := Blackarmor NAS220
DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
mdadm kmod-gpio-button-hotplug kmod-rtc-mv
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
UBINIZE_OPTS := -e 1
endef
TARGET_DEVICES += seagate_blackarmor-nas220
define Device/seagate_dockstar
DEVICE_VENDOR := Seagate
DEVICE_MODEL := FreeAgent Dockstar
DEVICE_PACKAGES := kmod-rtc-mv
SUPPORTED_DEVICES += dockstar
endef
TARGET_DEVICES += seagate_dockstar
define Device/seagate_goflexnet
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexNet
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
SUPPORTED_DEVICES += goflexnet
endef
TARGET_DEVICES += seagate_goflexnet
define Device/seagate_goflexhome
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexHome
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
SUPPORTED_DEVICES += goflexhome
endef
TARGET_DEVICES += seagate_goflexhome
define Device/zyxel_nsa310b
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NSA310b
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm85 kmod-rtc-mv
SUPPORTED_DEVICES += nsa310b
endef
TARGET_DEVICES += zyxel_nsa310b
define Device/zyxel_nsa310s
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NSA310S
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-rtc-mv
endef
TARGET_DEVICES += zyxel_nsa310s
define Device/zyxel_nsa325
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NSA325
DEVICE_VARIANT := v1/v2
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
SUPPORTED_DEVICES += nsa325
endef
TARGET_DEVICES += zyxel_nsa325
$(eval $(call BuildImage))
Reference in New Issue View Git Blame Copy Permalink