0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 14:06:15 +00:00
openwrt/target/linux/generic/files/drivers/net/phy/ar8327.c
Ansuel Smith 49d9d2b210 generic: fix compilation warning for ar8xxx swconfig
There are 2 warning for ar8xxx swconfig.
- Fix not used dev variable when ETHERNET_PACKET_MANGLE
  is not selected
- Convert fallthrough comment to compilation macro

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 04:51:38 +01:00

1551 lines
37 KiB
C

/*
* ar8327.c: AR8216 switch driver
*
* Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/list.h>
#include <linux/bitops.h>
#include <linux/switch.h>
#include <linux/delay.h>
#include <linux/phy.h>
#include <linux/lockdep.h>
#include <linux/ar8216_platform.h>
#include <linux/workqueue.h>
#include <linux/of_device.h>
#include <linux/leds.h>
#include <linux/mdio.h>
#include "ar8216.h"
#include "ar8327.h"
extern const struct ar8xxx_mib_desc ar8236_mibs[39];
extern const struct switch_attr ar8xxx_sw_attr_vlan[1];
static u32
ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg)
{
u32 t;
if (!cfg)
return 0;
t = 0;
switch (cfg->mode) {
case AR8327_PAD_NC:
break;
case AR8327_PAD_MAC2MAC_MII:
t = AR8327_PAD_MAC_MII_EN;
if (cfg->rxclk_sel)
t |= AR8327_PAD_MAC_MII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_MAC_MII_TXCLK_SEL;
break;
case AR8327_PAD_MAC2MAC_GMII:
t = AR8327_PAD_MAC_GMII_EN;
if (cfg->rxclk_sel)
t |= AR8327_PAD_MAC_GMII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_MAC_GMII_TXCLK_SEL;
break;
case AR8327_PAD_MAC_SGMII:
t = AR8327_PAD_SGMII_EN;
/*
* WAR for the QUalcomm Atheros AP136 board.
* It seems that RGMII TX/RX delay settings needs to be
* applied for SGMII mode as well, The ethernet is not
* reliable without this.
*/
t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
if (cfg->rxclk_delay_en)
t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
if (cfg->txclk_delay_en)
t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
if (cfg->sgmii_delay_en)
t |= AR8327_PAD_SGMII_DELAY_EN;
break;
case AR8327_PAD_MAC2PHY_MII:
t = AR8327_PAD_PHY_MII_EN;
if (cfg->rxclk_sel)
t |= AR8327_PAD_PHY_MII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_PHY_MII_TXCLK_SEL;
break;
case AR8327_PAD_MAC2PHY_GMII:
t = AR8327_PAD_PHY_GMII_EN;
if (cfg->pipe_rxclk_sel)
t |= AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL;
if (cfg->rxclk_sel)
t |= AR8327_PAD_PHY_GMII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_PHY_GMII_TXCLK_SEL;
break;
case AR8327_PAD_MAC_RGMII:
t = AR8327_PAD_RGMII_EN;
t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
if (cfg->rxclk_delay_en)
t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
if (cfg->txclk_delay_en)
t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
break;
case AR8327_PAD_PHY_GMII:
t = AR8327_PAD_PHYX_GMII_EN;
break;
case AR8327_PAD_PHY_RGMII:
t = AR8327_PAD_PHYX_RGMII_EN;
break;
case AR8327_PAD_PHY_MII:
t = AR8327_PAD_PHYX_MII_EN;
break;
}
return t;
}
static void
ar8327_phy_rgmii_set(struct ar8xxx_priv *priv, struct phy_device *phydev)
{
u16 phy_val = 0;
int phyaddr = phydev->mdio.addr;
struct device_node *np = phydev->mdio.dev.of_node;
if (!np)
return;
if (!of_property_read_bool(np, "qca,phy-rgmii-en")) {
pr_err("ar8327: qca,phy-rgmii-en is not specified\n");
return;
}
ar8xxx_phy_dbg_read(priv, phyaddr,
AR8327_PHY_MODE_SEL, &phy_val);
phy_val |= AR8327_PHY_MODE_SEL_RGMII;
ar8xxx_phy_dbg_write(priv, phyaddr,
AR8327_PHY_MODE_SEL, phy_val);
/* set rgmii tx clock delay if needed */
if (!of_property_read_bool(np, "qca,txclk-delay-en")) {
pr_err("ar8327: qca,txclk-delay-en is not specified\n");
return;
}
ar8xxx_phy_dbg_read(priv, phyaddr,
AR8327_PHY_SYS_CTRL, &phy_val);
phy_val |= AR8327_PHY_SYS_CTRL_RGMII_TX_DELAY;
ar8xxx_phy_dbg_write(priv, phyaddr,
AR8327_PHY_SYS_CTRL, phy_val);
/* set rgmii rx clock delay if needed */
if (!of_property_read_bool(np, "qca,rxclk-delay-en")) {
pr_err("ar8327: qca,rxclk-delay-en is not specified\n");
return;
}
ar8xxx_phy_dbg_read(priv, phyaddr,
AR8327_PHY_TEST_CTRL, &phy_val);
phy_val |= AR8327_PHY_TEST_CTRL_RGMII_RX_DELAY;
ar8xxx_phy_dbg_write(priv, phyaddr,
AR8327_PHY_TEST_CTRL, phy_val);
}
static void
ar8327_phy_fixup(struct ar8xxx_priv *priv, int phy)
{
switch (priv->chip_rev) {
case 1:
/* For 100M waveform */
ar8xxx_phy_dbg_write(priv, phy, 0, 0x02ea);
/* Turn on Gigabit clock */
ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x68a0);
break;
case 2:
ar8xxx_phy_mmd_write(priv, phy, 0x7, 0x3c, 0x0);
fallthrough;
case 4:
ar8xxx_phy_mmd_write(priv, phy, 0x3, 0x800d, 0x803f);
ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x6860);
ar8xxx_phy_dbg_write(priv, phy, 0x5, 0x2c46);
ar8xxx_phy_dbg_write(priv, phy, 0x3c, 0x6000);
break;
}
}
static u32
ar8327_get_port_init_status(struct ar8327_port_cfg *cfg)
{
u32 t;
if (!cfg->force_link)
return AR8216_PORT_STATUS_LINK_AUTO;
t = AR8216_PORT_STATUS_TXMAC | AR8216_PORT_STATUS_RXMAC;
t |= cfg->duplex ? AR8216_PORT_STATUS_DUPLEX : 0;
t |= cfg->rxpause ? AR8216_PORT_STATUS_RXFLOW : 0;
t |= cfg->txpause ? AR8216_PORT_STATUS_TXFLOW : 0;
switch (cfg->speed) {
case AR8327_PORT_SPEED_10:
t |= AR8216_PORT_SPEED_10M;
break;
case AR8327_PORT_SPEED_100:
t |= AR8216_PORT_SPEED_100M;
break;
case AR8327_PORT_SPEED_1000:
t |= AR8216_PORT_SPEED_1000M;
break;
}
return t;
}
#define AR8327_LED_ENTRY(_num, _reg, _shift) \
[_num] = { .reg = (_reg), .shift = (_shift) }
static const struct ar8327_led_entry
ar8327_led_map[AR8327_NUM_LEDS] = {
AR8327_LED_ENTRY(AR8327_LED_PHY0_0, 0, 14),
AR8327_LED_ENTRY(AR8327_LED_PHY0_1, 1, 14),
AR8327_LED_ENTRY(AR8327_LED_PHY0_2, 2, 14),
AR8327_LED_ENTRY(AR8327_LED_PHY1_0, 3, 8),
AR8327_LED_ENTRY(AR8327_LED_PHY1_1, 3, 10),
AR8327_LED_ENTRY(AR8327_LED_PHY1_2, 3, 12),
AR8327_LED_ENTRY(AR8327_LED_PHY2_0, 3, 14),
AR8327_LED_ENTRY(AR8327_LED_PHY2_1, 3, 16),
AR8327_LED_ENTRY(AR8327_LED_PHY2_2, 3, 18),
AR8327_LED_ENTRY(AR8327_LED_PHY3_0, 3, 20),
AR8327_LED_ENTRY(AR8327_LED_PHY3_1, 3, 22),
AR8327_LED_ENTRY(AR8327_LED_PHY3_2, 3, 24),
AR8327_LED_ENTRY(AR8327_LED_PHY4_0, 0, 30),
AR8327_LED_ENTRY(AR8327_LED_PHY4_1, 1, 30),
AR8327_LED_ENTRY(AR8327_LED_PHY4_2, 2, 30),
};
static void
ar8327_set_led_pattern(struct ar8xxx_priv *priv, unsigned int led_num,
enum ar8327_led_pattern pattern)
{
const struct ar8327_led_entry *entry;
entry = &ar8327_led_map[led_num];
ar8xxx_rmw(priv, AR8327_REG_LED_CTRL(entry->reg),
(3 << entry->shift), pattern << entry->shift);
}
static void
ar8327_led_work_func(struct work_struct *work)
{
struct ar8327_led *aled;
u8 pattern;
aled = container_of(work, struct ar8327_led, led_work);
pattern = aled->pattern;
ar8327_set_led_pattern(aled->sw_priv, aled->led_num,
pattern);
}
static void
ar8327_led_schedule_change(struct ar8327_led *aled, u8 pattern)
{
if (aled->pattern == pattern)
return;
aled->pattern = pattern;
schedule_work(&aled->led_work);
}
static inline struct ar8327_led *
led_cdev_to_ar8327_led(struct led_classdev *led_cdev)
{
return container_of(led_cdev, struct ar8327_led, cdev);
}
static int
ar8327_led_blink_set(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
if (*delay_on == 0 && *delay_off == 0) {
*delay_on = 125;
*delay_off = 125;
}
if (*delay_on != 125 || *delay_off != 125) {
/*
* The hardware only supports blinking at 4Hz. Fall back
* to software implementation in other cases.
*/
return -EINVAL;
}
spin_lock(&aled->lock);
aled->enable_hw_mode = false;
ar8327_led_schedule_change(aled, AR8327_LED_PATTERN_BLINK);
spin_unlock(&aled->lock);
return 0;
}
static void
ar8327_led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
u8 pattern;
bool active;
active = (brightness != LED_OFF);
active ^= aled->active_low;
pattern = (active) ? AR8327_LED_PATTERN_ON :
AR8327_LED_PATTERN_OFF;
spin_lock(&aled->lock);
aled->enable_hw_mode = false;
ar8327_led_schedule_change(aled, pattern);
spin_unlock(&aled->lock);
}
static ssize_t
ar8327_led_enable_hw_mode_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
ssize_t ret = 0;
ret += scnprintf(buf, PAGE_SIZE, "%d\n", aled->enable_hw_mode);
return ret;
}
static ssize_t
ar8327_led_enable_hw_mode_store(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
u8 pattern;
u8 value;
int ret;
ret = kstrtou8(buf, 10, &value);
if (ret < 0)
return -EINVAL;
spin_lock(&aled->lock);
aled->enable_hw_mode = !!value;
if (aled->enable_hw_mode)
pattern = AR8327_LED_PATTERN_RULE;
else
pattern = AR8327_LED_PATTERN_OFF;
ar8327_led_schedule_change(aled, pattern);
spin_unlock(&aled->lock);
return size;
}
static DEVICE_ATTR(enable_hw_mode, S_IRUGO | S_IWUSR,
ar8327_led_enable_hw_mode_show,
ar8327_led_enable_hw_mode_store);
static int
ar8327_led_register(struct ar8327_led *aled)
{
int ret;
ret = led_classdev_register(NULL, &aled->cdev);
if (ret < 0)
return ret;
if (aled->mode == AR8327_LED_MODE_HW) {
ret = device_create_file(aled->cdev.dev,
&dev_attr_enable_hw_mode);
if (ret)
goto err_unregister;
}
return 0;
err_unregister:
led_classdev_unregister(&aled->cdev);
return ret;
}
static void
ar8327_led_unregister(struct ar8327_led *aled)
{
if (aled->mode == AR8327_LED_MODE_HW)
device_remove_file(aled->cdev.dev, &dev_attr_enable_hw_mode);
led_classdev_unregister(&aled->cdev);
cancel_work_sync(&aled->led_work);
}
static int
ar8327_led_create(struct ar8xxx_priv *priv,
const struct ar8327_led_info *led_info)
{
struct ar8327_data *data = priv->chip_data;
struct ar8327_led *aled;
int ret;
if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
return 0;
if (!led_info->name)
return -EINVAL;
if (led_info->led_num >= AR8327_NUM_LEDS)
return -EINVAL;
aled = kzalloc(sizeof(*aled) + strlen(led_info->name) + 1,
GFP_KERNEL);
if (!aled)
return -ENOMEM;
aled->sw_priv = priv;
aled->led_num = led_info->led_num;
aled->active_low = led_info->active_low;
aled->mode = led_info->mode;
if (aled->mode == AR8327_LED_MODE_HW)
aled->enable_hw_mode = true;
aled->name = (char *)(aled + 1);
strcpy(aled->name, led_info->name);
aled->cdev.name = aled->name;
aled->cdev.brightness_set = ar8327_led_set_brightness;
aled->cdev.blink_set = ar8327_led_blink_set;
aled->cdev.default_trigger = led_info->default_trigger;
spin_lock_init(&aled->lock);
mutex_init(&aled->mutex);
INIT_WORK(&aled->led_work, ar8327_led_work_func);
ret = ar8327_led_register(aled);
if (ret)
goto err_free;
data->leds[data->num_leds++] = aled;
return 0;
err_free:
kfree(aled);
return ret;
}
static void
ar8327_led_destroy(struct ar8327_led *aled)
{
ar8327_led_unregister(aled);
kfree(aled);
}
static void
ar8327_leds_init(struct ar8xxx_priv *priv)
{
struct ar8327_data *data = priv->chip_data;
unsigned i;
if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
return;
for (i = 0; i < data->num_leds; i++) {
struct ar8327_led *aled;
aled = data->leds[i];
if (aled->enable_hw_mode)
aled->pattern = AR8327_LED_PATTERN_RULE;
else
aled->pattern = AR8327_LED_PATTERN_OFF;
ar8327_set_led_pattern(priv, aled->led_num, aled->pattern);
}
}
static void
ar8327_leds_cleanup(struct ar8xxx_priv *priv)
{
struct ar8327_data *data = priv->chip_data;
unsigned i;
if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
return;
for (i = 0; i < data->num_leds; i++) {
struct ar8327_led *aled;
aled = data->leds[i];
ar8327_led_destroy(aled);
}
kfree(data->leds);
}
static int
ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
struct ar8327_platform_data *pdata)
{
struct ar8327_led_cfg *led_cfg;
struct ar8327_data *data = priv->chip_data;
u32 pos, new_pos;
u32 t;
if (!pdata)
return -EINVAL;
priv->get_port_link = pdata->get_port_link;
data->port0_status = ar8327_get_port_init_status(&pdata->port0_cfg);
data->port6_status = ar8327_get_port_init_status(&pdata->port6_cfg);
t = ar8327_get_pad_cfg(pdata->pad0_cfg);
if (chip_is_ar8337(priv) && !pdata->pad0_cfg->mac06_exchange_dis)
t |= AR8337_PAD_MAC06_EXCHANGE_EN;
ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
t = ar8327_get_pad_cfg(pdata->pad5_cfg);
ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
t = ar8327_get_pad_cfg(pdata->pad6_cfg);
ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);
pos = ar8xxx_read(priv, AR8327_REG_POWER_ON_STRAP);
new_pos = pos;
led_cfg = pdata->led_cfg;
if (led_cfg) {
if (led_cfg->open_drain)
new_pos |= AR8327_POWER_ON_STRAP_LED_OPEN_EN;
else
new_pos &= ~AR8327_POWER_ON_STRAP_LED_OPEN_EN;
ar8xxx_write(priv, AR8327_REG_LED_CTRL0, led_cfg->led_ctrl0);
ar8xxx_write(priv, AR8327_REG_LED_CTRL1, led_cfg->led_ctrl1);
ar8xxx_write(priv, AR8327_REG_LED_CTRL2, led_cfg->led_ctrl2);
ar8xxx_write(priv, AR8327_REG_LED_CTRL3, led_cfg->led_ctrl3);
if (new_pos != pos)
new_pos |= AR8327_POWER_ON_STRAP_POWER_ON_SEL;
}
if (pdata->sgmii_cfg) {
t = pdata->sgmii_cfg->sgmii_ctrl;
if (priv->chip_rev == 1)
t |= AR8327_SGMII_CTRL_EN_PLL |
AR8327_SGMII_CTRL_EN_RX |
AR8327_SGMII_CTRL_EN_TX;
else
t &= ~(AR8327_SGMII_CTRL_EN_PLL |
AR8327_SGMII_CTRL_EN_RX |
AR8327_SGMII_CTRL_EN_TX);
ar8xxx_write(priv, AR8327_REG_SGMII_CTRL, t);
if (pdata->sgmii_cfg->serdes_aen)
new_pos &= ~AR8327_POWER_ON_STRAP_SERDES_AEN;
else
new_pos |= AR8327_POWER_ON_STRAP_SERDES_AEN;
}
ar8xxx_write(priv, AR8327_REG_POWER_ON_STRAP, new_pos);
if (pdata->leds && pdata->num_leds) {
int i;
data->leds = kzalloc(pdata->num_leds * sizeof(void *),
GFP_KERNEL);
if (!data->leds)
return -ENOMEM;
for (i = 0; i < pdata->num_leds; i++)
ar8327_led_create(priv, &pdata->leds[i]);
}
return 0;
}
#ifdef CONFIG_OF
static int
ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
{
struct ar8327_data *data = priv->chip_data;
const __be32 *paddr;
int len;
int i;
paddr = of_get_property(np, "qca,ar8327-initvals", &len);
if (!paddr || len < (2 * sizeof(*paddr)))
return -EINVAL;
len /= sizeof(*paddr);
for (i = 0; i < len - 1; i += 2) {
u32 reg;
u32 val;
reg = be32_to_cpup(paddr + i);
val = be32_to_cpup(paddr + i + 1);
switch (reg) {
case AR8327_REG_PORT_STATUS(0):
data->port0_status = val;
break;
case AR8327_REG_PORT_STATUS(6):
data->port6_status = val;
break;
default:
ar8xxx_write(priv, reg, val);
break;
}
}
return 0;
}
#else
static inline int
ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
{
return -EINVAL;
}
#endif
static int
ar8327_hw_init(struct ar8xxx_priv *priv)
{
int ret;
priv->chip_data = kzalloc(sizeof(struct ar8327_data), GFP_KERNEL);
if (!priv->chip_data)
return -ENOMEM;
if (priv->pdev->of_node)
ret = ar8327_hw_config_of(priv, priv->pdev->of_node);
else
ret = ar8327_hw_config_pdata(priv,
priv->phy->mdio.dev.platform_data);
if (ret)
return ret;
ar8327_leds_init(priv);
ar8xxx_phy_init(priv);
return 0;
}
static void
ar8327_cleanup(struct ar8xxx_priv *priv)
{
ar8327_leds_cleanup(priv);
}
static void
ar8327_init_globals(struct ar8xxx_priv *priv)
{
struct ar8327_data *data = priv->chip_data;
u32 t;
int i;
/* enable CPU port and disable mirror port */
t = AR8327_FWD_CTRL0_CPU_PORT_EN |
AR8327_FWD_CTRL0_MIRROR_PORT;
ar8xxx_write(priv, AR8327_REG_FWD_CTRL0, t);
/* forward multicast and broadcast frames to CPU */
t = (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_UC_FLOOD_S) |
(AR8327_PORTS_ALL << AR8327_FWD_CTRL1_MC_FLOOD_S) |
(AR8327_PORTS_ALL << AR8327_FWD_CTRL1_BC_FLOOD_S);
ar8xxx_write(priv, AR8327_REG_FWD_CTRL1, t);
/* enable jumbo frames */
ar8xxx_rmw(priv, AR8327_REG_MAX_FRAME_SIZE,
AR8327_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
/* Enable MIB counters */
ar8xxx_reg_set(priv, AR8327_REG_MODULE_EN,
AR8327_MODULE_EN_MIB);
/* Disable EEE on all phy's due to stability issues */
for (i = 0; i < AR8XXX_NUM_PHYS; i++)
data->eee[i] = false;
}
static void
ar8327_init_port(struct ar8xxx_priv *priv, int port)
{
struct ar8327_data *data = priv->chip_data;
u32 t;
if (port == AR8216_PORT_CPU)
t = data->port0_status;
else if (port == 6)
t = data->port6_status;
else
t = AR8216_PORT_STATUS_LINK_AUTO;
if (port != AR8216_PORT_CPU && port != 6) {
/*hw limitation:if configure mac when there is traffic,
port MAC may work abnormal. Need disable lan&wan mac at fisrt*/
ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), 0);
msleep(100);
t |= AR8216_PORT_STATUS_FLOW_CONTROL;
ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
} else {
ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
}
ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);
ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), 0);
t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
t = AR8327_PORT_LOOKUP_LEARN;
t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
}
static u32
ar8327_read_port_status(struct ar8xxx_priv *priv, int port)
{
u32 t;
t = ar8xxx_read(priv, AR8327_REG_PORT_STATUS(port));
/* map the flow control autoneg result bits to the flow control bits
* used in forced mode to allow ar8216_read_port_link detect
* flow control properly if autoneg is used
*/
if (t & AR8216_PORT_STATUS_LINK_UP &&
t & AR8216_PORT_STATUS_LINK_AUTO) {
t &= ~(AR8216_PORT_STATUS_TXFLOW | AR8216_PORT_STATUS_RXFLOW);
if (t & AR8327_PORT_STATUS_TXFLOW_AUTO)
t |= AR8216_PORT_STATUS_TXFLOW;
if (t & AR8327_PORT_STATUS_RXFLOW_AUTO)
t |= AR8216_PORT_STATUS_RXFLOW;
}
return t;
}
static u32
ar8327_read_port_eee_status(struct ar8xxx_priv *priv, int port)
{
int phy;
u16 t;
if (port >= priv->dev.ports)
return 0;
if (port == 0 || port == 6)
return 0;
phy = port - 1;
/* EEE Ability Auto-negotiation Result */
t = ar8xxx_phy_mmd_read(priv, phy, 0x7, 0x8000);
return mmd_eee_adv_to_ethtool_adv_t(t);
}
static int
ar8327_atu_flush(struct ar8xxx_priv *priv)
{
int ret;
ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
AR8327_ATU_FUNC_BUSY, 0);
if (!ret)
ar8xxx_write(priv, AR8327_REG_ATU_FUNC,
AR8327_ATU_FUNC_OP_FLUSH |
AR8327_ATU_FUNC_BUSY);
return ret;
}
static int
ar8327_atu_flush_port(struct ar8xxx_priv *priv, int port)
{
u32 t;
int ret;
ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
AR8327_ATU_FUNC_BUSY, 0);
if (!ret) {
t = (port << AR8327_ATU_PORT_NUM_S);
t |= AR8327_ATU_FUNC_OP_FLUSH_PORT;
t |= AR8327_ATU_FUNC_BUSY;
ar8xxx_write(priv, AR8327_REG_ATU_FUNC, t);
}
return ret;
}
static int
ar8327_get_port_igmp(struct ar8xxx_priv *priv, int port)
{
u32 fwd_ctrl, frame_ack;
fwd_ctrl = (BIT(port) << AR8327_FWD_CTRL1_IGMP_S);
frame_ack = ((AR8327_FRAME_ACK_CTRL_IGMP_MLD |
AR8327_FRAME_ACK_CTRL_IGMP_JOIN |
AR8327_FRAME_ACK_CTRL_IGMP_LEAVE) <<
AR8327_FRAME_ACK_CTRL_S(port));
return (ar8xxx_read(priv, AR8327_REG_FWD_CTRL1) &
fwd_ctrl) == fwd_ctrl &&
(ar8xxx_read(priv, AR8327_REG_FRAME_ACK_CTRL(port)) &
frame_ack) == frame_ack;
}
static void
ar8327_set_port_igmp(struct ar8xxx_priv *priv, int port, int enable)
{
int reg_frame_ack = AR8327_REG_FRAME_ACK_CTRL(port);
u32 val_frame_ack = (AR8327_FRAME_ACK_CTRL_IGMP_MLD |
AR8327_FRAME_ACK_CTRL_IGMP_JOIN |
AR8327_FRAME_ACK_CTRL_IGMP_LEAVE) <<
AR8327_FRAME_ACK_CTRL_S(port);
if (enable) {
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL1,
BIT(port) << AR8327_FWD_CTRL1_MC_FLOOD_S,
BIT(port) << AR8327_FWD_CTRL1_IGMP_S);
ar8xxx_reg_set(priv, reg_frame_ack, val_frame_ack);
} else {
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL1,
BIT(port) << AR8327_FWD_CTRL1_IGMP_S,
BIT(port) << AR8327_FWD_CTRL1_MC_FLOOD_S);
ar8xxx_reg_clear(priv, reg_frame_ack, val_frame_ack);
}
}
static void
ar8327_vtu_op(struct ar8xxx_priv *priv, u32 op, u32 val)
{
if (ar8216_wait_bit(priv, AR8327_REG_VTU_FUNC1,
AR8327_VTU_FUNC1_BUSY, 0))
return;
if ((op & AR8327_VTU_FUNC1_OP) == AR8327_VTU_FUNC1_OP_LOAD)
ar8xxx_write(priv, AR8327_REG_VTU_FUNC0, val);
op |= AR8327_VTU_FUNC1_BUSY;
ar8xxx_write(priv, AR8327_REG_VTU_FUNC1, op);
}
static void
ar8327_vtu_flush(struct ar8xxx_priv *priv)
{
ar8327_vtu_op(priv, AR8327_VTU_FUNC1_OP_FLUSH, 0);
}
static void
ar8327_vtu_load_vlan(struct ar8xxx_priv *priv, u32 vid, u32 port_mask)
{
u32 op;
u32 val;
int i;
op = AR8327_VTU_FUNC1_OP_LOAD | (vid << AR8327_VTU_FUNC1_VID_S);
val = AR8327_VTU_FUNC0_VALID | AR8327_VTU_FUNC0_IVL;
for (i = 0; i < AR8327_NUM_PORTS; i++) {
u32 mode;
if ((port_mask & BIT(i)) == 0)
mode = AR8327_VTU_FUNC0_EG_MODE_NOT;
else if (priv->vlan == 0)
mode = AR8327_VTU_FUNC0_EG_MODE_KEEP;
else if ((priv->vlan_tagged & BIT(i)) || (priv->vlan_id[priv->pvid[i]] != vid))
mode = AR8327_VTU_FUNC0_EG_MODE_TAG;
else
mode = AR8327_VTU_FUNC0_EG_MODE_UNTAG;
val |= mode << AR8327_VTU_FUNC0_EG_MODE_S(i);
}
ar8327_vtu_op(priv, op, val);
}
static void
ar8327_setup_port(struct ar8xxx_priv *priv, int port, u32 members)
{
u32 t;
u32 egress, ingress;
u32 pvid = priv->vlan_id[priv->pvid[port]];
if (priv->vlan) {
egress = AR8327_PORT_VLAN1_OUT_MODE_UNMOD;
ingress = AR8216_IN_SECURE;
} else {
egress = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH;
ingress = AR8216_IN_PORT_ONLY;
}
t = pvid << AR8327_PORT_VLAN0_DEF_SVID_S;
t |= pvid << AR8327_PORT_VLAN0_DEF_CVID_S;
if (priv->vlan && priv->port_vlan_prio[port]) {
u32 prio = priv->port_vlan_prio[port];
t |= prio << AR8327_PORT_VLAN0_DEF_SPRI_S;
t |= prio << AR8327_PORT_VLAN0_DEF_CPRI_S;
}
ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
t |= egress << AR8327_PORT_VLAN1_OUT_MODE_S;
if (priv->vlan && priv->port_vlan_prio[port])
t |= AR8327_PORT_VLAN1_VLAN_PRI_PROP;
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
t = members;
t |= AR8327_PORT_LOOKUP_LEARN;
t |= ingress << AR8327_PORT_LOOKUP_IN_MODE_S;
t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
}
static int
ar8327_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
u8 ports = priv->vlan_table[val->port_vlan];
int i;
val->len = 0;
for (i = 0; i < dev->ports; i++) {
struct switch_port *p;
if (!(ports & (1 << i)))
continue;
p = &val->value.ports[val->len++];
p->id = i;
if ((priv->vlan_tagged & (1 << i)) || (priv->pvid[i] != val->port_vlan))
p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
else
p->flags = 0;
}
return 0;
}
static int
ar8327_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
u8 *vt = &priv->vlan_table[val->port_vlan];
int i;
*vt = 0;
for (i = 0; i < val->len; i++) {
struct switch_port *p = &val->value.ports[i];
if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
if (val->port_vlan == priv->pvid[p->id]) {
priv->vlan_tagged |= (1 << p->id);
}
} else {
priv->vlan_tagged &= ~(1 << p->id);
priv->pvid[p->id] = val->port_vlan;
}
*vt |= 1 << p->id;
}
return 0;
}
static void
ar8327_set_mirror_regs(struct ar8xxx_priv *priv)
{
int port;
/* reset all mirror registers */
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
AR8327_FWD_CTRL0_MIRROR_PORT,
(0xF << AR8327_FWD_CTRL0_MIRROR_PORT_S));
for (port = 0; port < AR8327_NUM_PORTS; port++) {
ar8xxx_reg_clear(priv, AR8327_REG_PORT_LOOKUP(port),
AR8327_PORT_LOOKUP_ING_MIRROR_EN);
ar8xxx_reg_clear(priv, AR8327_REG_PORT_HOL_CTRL1(port),
AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
}
/* now enable mirroring if necessary */
if (priv->source_port >= AR8327_NUM_PORTS ||
priv->monitor_port >= AR8327_NUM_PORTS ||
priv->source_port == priv->monitor_port) {
return;
}
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
AR8327_FWD_CTRL0_MIRROR_PORT,
(priv->monitor_port << AR8327_FWD_CTRL0_MIRROR_PORT_S));
if (priv->mirror_rx)
ar8xxx_reg_set(priv, AR8327_REG_PORT_LOOKUP(priv->source_port),
AR8327_PORT_LOOKUP_ING_MIRROR_EN);
if (priv->mirror_tx)
ar8xxx_reg_set(priv, AR8327_REG_PORT_HOL_CTRL1(priv->source_port),
AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
}
static int
ar8327_sw_set_eee(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
struct ar8327_data *data = priv->chip_data;
int port = val->port_vlan;
int phy;
if (port >= dev->ports)
return -EINVAL;
if (port == 0 || port == 6)
return -EOPNOTSUPP;
phy = port - 1;
data->eee[phy] = !!(val->value.i);
return 0;
}
static int
ar8327_sw_get_eee(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
const struct ar8327_data *data = priv->chip_data;
int port = val->port_vlan;
int phy;
if (port >= dev->ports)
return -EINVAL;
if (port == 0 || port == 6)
return -EOPNOTSUPP;
phy = port - 1;
val->value.i = data->eee[phy];
return 0;
}
static void
ar8327_wait_atu_ready(struct ar8xxx_priv *priv, u16 r2, u16 r1)
{
int timeout = 20;
while (ar8xxx_mii_read32(priv, r2, r1) & AR8327_ATU_FUNC_BUSY && --timeout) {
udelay(10);
cond_resched();
}
if (!timeout)
pr_err("ar8327: timeout waiting for atu to become ready\n");
}
static void ar8327_get_arl_entry(struct ar8xxx_priv *priv,
struct arl_entry *a, u32 *status, enum arl_op op)
{
struct mii_bus *bus = priv->mii_bus;
u16 r2, page;
u16 r1_data0, r1_data1, r1_data2, r1_func;
u32 val0, val1, val2;
split_addr(AR8327_REG_ATU_DATA0, &r1_data0, &r2, &page);
r2 |= 0x10;
r1_data1 = (AR8327_REG_ATU_DATA1 >> 1) & 0x1e;
r1_data2 = (AR8327_REG_ATU_DATA2 >> 1) & 0x1e;
r1_func = (AR8327_REG_ATU_FUNC >> 1) & 0x1e;
switch (op) {
case AR8XXX_ARL_INITIALIZE:
/* all ATU registers are on the same page
* therefore set page only once
*/
bus->write(bus, 0x18, 0, page);
wait_for_page_switch();
ar8327_wait_atu_ready(priv, r2, r1_func);
ar8xxx_mii_write32(priv, r2, r1_data0, 0);
ar8xxx_mii_write32(priv, r2, r1_data1, 0);
ar8xxx_mii_write32(priv, r2, r1_data2, 0);
break;
case AR8XXX_ARL_GET_NEXT:
ar8xxx_mii_write32(priv, r2, r1_func,
AR8327_ATU_FUNC_OP_GET_NEXT |
AR8327_ATU_FUNC_BUSY);
ar8327_wait_atu_ready(priv, r2, r1_func);
val0 = ar8xxx_mii_read32(priv, r2, r1_data0);
val1 = ar8xxx_mii_read32(priv, r2, r1_data1);
val2 = ar8xxx_mii_read32(priv, r2, r1_data2);
*status = val2 & AR8327_ATU_STATUS;
if (!*status)
break;
a->portmap = (val1 & AR8327_ATU_PORTS) >> AR8327_ATU_PORTS_S;
a->mac[0] = (val0 & AR8327_ATU_ADDR0) >> AR8327_ATU_ADDR0_S;
a->mac[1] = (val0 & AR8327_ATU_ADDR1) >> AR8327_ATU_ADDR1_S;
a->mac[2] = (val0 & AR8327_ATU_ADDR2) >> AR8327_ATU_ADDR2_S;
a->mac[3] = (val0 & AR8327_ATU_ADDR3) >> AR8327_ATU_ADDR3_S;
a->mac[4] = (val1 & AR8327_ATU_ADDR4) >> AR8327_ATU_ADDR4_S;
a->mac[5] = (val1 & AR8327_ATU_ADDR5) >> AR8327_ATU_ADDR5_S;
break;
}
}
static int
ar8327_sw_hw_apply(struct switch_dev *dev)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
const struct ar8327_data *data = priv->chip_data;
int ret, i;
ret = ar8xxx_sw_hw_apply(dev);
if (ret)
return ret;
for (i=0; i < AR8XXX_NUM_PHYS; i++) {
if (data->eee[i])
ar8xxx_reg_clear(priv, AR8327_REG_EEE_CTRL,
AR8327_EEE_CTRL_DISABLE_PHY(i));
else
ar8xxx_reg_set(priv, AR8327_REG_EEE_CTRL,
AR8327_EEE_CTRL_DISABLE_PHY(i));
}
return 0;
}
int
ar8327_sw_get_port_igmp_snooping(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
int port = val->port_vlan;
if (port >= dev->ports)
return -EINVAL;
mutex_lock(&priv->reg_mutex);
val->value.i = ar8327_get_port_igmp(priv, port);
mutex_unlock(&priv->reg_mutex);
return 0;
}
int
ar8327_sw_set_port_igmp_snooping(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
int port = val->port_vlan;
if (port >= dev->ports)
return -EINVAL;
mutex_lock(&priv->reg_mutex);
ar8327_set_port_igmp(priv, port, val->value.i);
mutex_unlock(&priv->reg_mutex);
return 0;
}
int
ar8327_sw_get_igmp_snooping(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
int port;
for (port = 0; port < dev->ports; port++) {
val->port_vlan = port;
if (ar8327_sw_get_port_igmp_snooping(dev, attr, val) ||
!val->value.i)
break;
}
return 0;
}
int
ar8327_sw_set_igmp_snooping(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
int port;
for (port = 0; port < dev->ports; port++) {
val->port_vlan = port;
if (ar8327_sw_set_port_igmp_snooping(dev, attr, val))
break;
}
return 0;
}
int
ar8327_sw_get_igmp_v3(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
u32 val_reg;
mutex_lock(&priv->reg_mutex);
val_reg = ar8xxx_read(priv, AR8327_REG_FRAME_ACK_CTRL1);
val->value.i = ((val_reg & AR8327_FRAME_ACK_CTRL_IGMP_V3_EN) != 0);
mutex_unlock(&priv->reg_mutex);
return 0;
}
int
ar8327_sw_set_igmp_v3(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
mutex_lock(&priv->reg_mutex);
if (val->value.i)
ar8xxx_reg_set(priv, AR8327_REG_FRAME_ACK_CTRL1,
AR8327_FRAME_ACK_CTRL_IGMP_V3_EN);
else
ar8xxx_reg_clear(priv, AR8327_REG_FRAME_ACK_CTRL1,
AR8327_FRAME_ACK_CTRL_IGMP_V3_EN);
mutex_unlock(&priv->reg_mutex);
return 0;
}
static int
ar8327_sw_set_port_vlan_prio(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
int port = val->port_vlan;
if (port >= dev->ports)
return -EINVAL;
if (port == 0 || port == 6)
return -EOPNOTSUPP;
if (val->value.i < 0 || val->value.i > 7)
return -EINVAL;
priv->port_vlan_prio[port] = val->value.i;
return 0;
}
static int
ar8327_sw_get_port_vlan_prio(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
int port = val->port_vlan;
val->value.i = priv->port_vlan_prio[port];
return 0;
}
static const struct switch_attr ar8327_sw_attr_globals[] = {
{
.type = SWITCH_TYPE_INT,
.name = "enable_vlan",
.description = "Enable VLAN mode",
.set = ar8xxx_sw_set_vlan,
.get = ar8xxx_sw_get_vlan,
.max = 1
},
{
.type = SWITCH_TYPE_NOVAL,
.name = "reset_mibs",
.description = "Reset all MIB counters",
.set = ar8xxx_sw_set_reset_mibs,
},
{
.type = SWITCH_TYPE_INT,
.name = "ar8xxx_mib_poll_interval",
.description = "MIB polling interval in msecs (0 to disable)",
.set = ar8xxx_sw_set_mib_poll_interval,
.get = ar8xxx_sw_get_mib_poll_interval
},
{
.type = SWITCH_TYPE_INT,
.name = "ar8xxx_mib_type",
.description = "MIB type (0=basic 1=extended)",
.set = ar8xxx_sw_set_mib_type,
.get = ar8xxx_sw_get_mib_type
},
{
.type = SWITCH_TYPE_INT,
.name = "enable_mirror_rx",
.description = "Enable mirroring of RX packets",
.set = ar8xxx_sw_set_mirror_rx_enable,
.get = ar8xxx_sw_get_mirror_rx_enable,
.max = 1
},
{
.type = SWITCH_TYPE_INT,
.name = "enable_mirror_tx",
.description = "Enable mirroring of TX packets",
.set = ar8xxx_sw_set_mirror_tx_enable,
.get = ar8xxx_sw_get_mirror_tx_enable,
.max = 1
},
{
.type = SWITCH_TYPE_INT,
.name = "mirror_monitor_port",
.description = "Mirror monitor port",
.set = ar8xxx_sw_set_mirror_monitor_port,
.get = ar8xxx_sw_get_mirror_monitor_port,
.max = AR8327_NUM_PORTS - 1
},
{
.type = SWITCH_TYPE_INT,
.name = "mirror_source_port",
.description = "Mirror source port",
.set = ar8xxx_sw_set_mirror_source_port,
.get = ar8xxx_sw_get_mirror_source_port,
.max = AR8327_NUM_PORTS - 1
},
{
.type = SWITCH_TYPE_INT,
.name = "arl_age_time",
.description = "ARL age time (secs)",
.set = ar8xxx_sw_set_arl_age_time,
.get = ar8xxx_sw_get_arl_age_time,
},
{
.type = SWITCH_TYPE_STRING,
.name = "arl_table",
.description = "Get ARL table",
.set = NULL,
.get = ar8xxx_sw_get_arl_table,
},
{
.type = SWITCH_TYPE_NOVAL,
.name = "flush_arl_table",
.description = "Flush ARL table",
.set = ar8xxx_sw_set_flush_arl_table,
},
{
.type = SWITCH_TYPE_INT,
.name = "igmp_snooping",
.description = "Enable IGMP Snooping",
.set = ar8327_sw_set_igmp_snooping,
.get = ar8327_sw_get_igmp_snooping,
.max = 1
},
{
.type = SWITCH_TYPE_INT,
.name = "igmp_v3",
.description = "Enable IGMPv3 support",
.set = ar8327_sw_set_igmp_v3,
.get = ar8327_sw_get_igmp_v3,
.max = 1
},
};
static const struct switch_attr ar8327_sw_attr_port[] = {
{
.type = SWITCH_TYPE_NOVAL,
.name = "reset_mib",
.description = "Reset single port MIB counters",
.set = ar8xxx_sw_set_port_reset_mib,
},
{
.type = SWITCH_TYPE_STRING,
.name = "mib",
.description = "Get port's MIB counters",
.set = NULL,
.get = ar8xxx_sw_get_port_mib,
},
{
.type = SWITCH_TYPE_INT,
.name = "enable_eee",
.description = "Enable EEE PHY sleep mode",
.set = ar8327_sw_set_eee,
.get = ar8327_sw_get_eee,
.max = 1,
},
{
.type = SWITCH_TYPE_NOVAL,
.name = "flush_arl_table",
.description = "Flush port's ARL table entries",
.set = ar8xxx_sw_set_flush_port_arl_table,
},
{
.type = SWITCH_TYPE_INT,
.name = "igmp_snooping",
.description = "Enable port's IGMP Snooping",
.set = ar8327_sw_set_port_igmp_snooping,
.get = ar8327_sw_get_port_igmp_snooping,
.max = 1
},
{
.type = SWITCH_TYPE_INT,
.name = "vlan_prio",
.description = "Port VLAN default priority (VLAN PCP) (0-7)",
.set = ar8327_sw_set_port_vlan_prio,
.get = ar8327_sw_get_port_vlan_prio,
.max = 7,
},
};
static const struct switch_dev_ops ar8327_sw_ops = {
.attr_global = {
.attr = ar8327_sw_attr_globals,
.n_attr = ARRAY_SIZE(ar8327_sw_attr_globals),
},
.attr_port = {
.attr = ar8327_sw_attr_port,
.n_attr = ARRAY_SIZE(ar8327_sw_attr_port),
},
.attr_vlan = {
.attr = ar8xxx_sw_attr_vlan,
.n_attr = ARRAY_SIZE(ar8xxx_sw_attr_vlan),
},
.get_port_pvid = ar8xxx_sw_get_pvid,
.set_port_pvid = ar8xxx_sw_set_pvid,
.get_vlan_ports = ar8327_sw_get_ports,
.set_vlan_ports = ar8327_sw_set_ports,
.apply_config = ar8327_sw_hw_apply,
.reset_switch = ar8xxx_sw_reset_switch,
.get_port_link = ar8xxx_sw_get_port_link,
.get_port_stats = ar8xxx_sw_get_port_stats,
};
const struct ar8xxx_chip ar8327_chip = {
.caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
.config_at_probe = true,
.mii_lo_first = true,
.name = "Atheros AR8327",
.ports = AR8327_NUM_PORTS,
.vlans = AR83X7_MAX_VLANS,
.swops = &ar8327_sw_ops,
.reg_port_stats_start = 0x1000,
.reg_port_stats_length = 0x100,
.reg_arl_ctrl = AR8327_REG_ARL_CTRL,
.hw_init = ar8327_hw_init,
.cleanup = ar8327_cleanup,
.init_globals = ar8327_init_globals,
.init_port = ar8327_init_port,
.setup_port = ar8327_setup_port,
.read_port_status = ar8327_read_port_status,
.read_port_eee_status = ar8327_read_port_eee_status,
.atu_flush = ar8327_atu_flush,
.atu_flush_port = ar8327_atu_flush_port,
.vtu_flush = ar8327_vtu_flush,
.vtu_load_vlan = ar8327_vtu_load_vlan,
.phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
.get_arl_entry = ar8327_get_arl_entry,
.sw_hw_apply = ar8327_sw_hw_apply,
.num_mibs = ARRAY_SIZE(ar8236_mibs),
.mib_decs = ar8236_mibs,
.mib_func = AR8327_REG_MIB_FUNC,
.mib_rxb_id = AR8236_MIB_RXB_ID,
.mib_txb_id = AR8236_MIB_TXB_ID,
};
const struct ar8xxx_chip ar8337_chip = {
.caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
.config_at_probe = true,
.mii_lo_first = true,
.name = "Atheros AR8337",
.ports = AR8327_NUM_PORTS,
.vlans = AR83X7_MAX_VLANS,
.swops = &ar8327_sw_ops,
.reg_port_stats_start = 0x1000,
.reg_port_stats_length = 0x100,
.reg_arl_ctrl = AR8327_REG_ARL_CTRL,
.hw_init = ar8327_hw_init,
.cleanup = ar8327_cleanup,
.init_globals = ar8327_init_globals,
.init_port = ar8327_init_port,
.setup_port = ar8327_setup_port,
.read_port_status = ar8327_read_port_status,
.read_port_eee_status = ar8327_read_port_eee_status,
.atu_flush = ar8327_atu_flush,
.atu_flush_port = ar8327_atu_flush_port,
.vtu_flush = ar8327_vtu_flush,
.vtu_load_vlan = ar8327_vtu_load_vlan,
.phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
.get_arl_entry = ar8327_get_arl_entry,
.sw_hw_apply = ar8327_sw_hw_apply,
.phy_rgmii_set = ar8327_phy_rgmii_set,
.num_mibs = ARRAY_SIZE(ar8236_mibs),
.mib_decs = ar8236_mibs,
.mib_func = AR8327_REG_MIB_FUNC,
.mib_rxb_id = AR8236_MIB_RXB_ID,
.mib_txb_id = AR8236_MIB_TXB_ID,
};