0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 14:06:15 +00:00
openwrt/target/linux/generic/backport-6.6/790-44-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch
Daniel Golle fe9d2ccbc3 generic: v6.1, v6.6: add patch to fix PHY-muxing on MT7530
Move accepted patches to backport folder, re-add previously removed patch
which caused havoc on MT7621 and add the (still pending) fix.

Fixes: d40691a5fb ("generic: 6.1, 6.6: mt7530: import pending patches")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-27 16:14:10 +01:00

118 lines
3.5 KiB
Diff
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

From 2982f395c9a513b168f1e685588f70013cba2f5f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Date: Mon, 22 Apr 2024 10:15:14 +0300
Subject: [PATCH 07/15] net: dsa: mt7530: move MT753X_MTRAP operations for
MT7530
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On MT7530, the media-independent interfaces of port 5 and 6 are controlled
by the MT7530_P5_DIS and MT7530_P6_DIS bits of the hardware trap. Deal with
these bits only when the relevant port is being enabled or disabled. This
ensures that these ports will be disabled when they are not in use.
Do not set MT7530_CHG_TRAP on mt7530_setup_port5() as that's already being
done on mt7530_setup().
Instead of globally setting MT7530_P5_MAC_SEL, clear it, then set it only
on the appropriate case.
If PHY muxing is detected, clear MT7530_P5_DIS before calling
mt7530_setup_port5().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 38 +++++++++++++++++++++++++++-----------
1 file changed, 27 insertions(+), 11 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -880,8 +880,7 @@ static void mt7530_setup_port5(struct ds
val = mt7530_read(priv, MT753X_MTRAP);
- val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
- val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
+ val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE;
switch (priv->p5_mode) {
/* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
@@ -891,15 +890,13 @@ static void mt7530_setup_port5(struct ds
/* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
case MUX_PHY_P4:
- val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
-
/* Setup the MAC by default for the cpu port */
mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
break;
/* GMAC5: P5 -> SoC MAC or external PHY */
default:
- val &= ~MT7530_P5_DIS;
+ val |= MT7530_P5_MAC_SEL;
break;
}
@@ -1193,6 +1190,14 @@ mt7530_port_enable(struct dsa_switch *ds
mutex_unlock(&priv->reg_mutex);
+ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+ return 0;
+
+ if (port == 5)
+ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ else if (port == 6)
+ mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS);
+
return 0;
}
@@ -1211,6 +1216,14 @@ mt7530_port_disable(struct dsa_switch *d
PCR_MATRIX_CLR);
mutex_unlock(&priv->reg_mutex);
+
+ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+ return;
+
+ if (port == 5)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ else if (port == 6)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
}
static int
@@ -2401,11 +2414,11 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_rmw(priv, MT7530_TRGMII_RD(i),
RD_TAP_MASK, RD_TAP(16));
- /* Enable port 6 */
- val = mt7530_read(priv, MT753X_MTRAP);
- val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
- val |= MT7530_CHG_TRAP;
- mt7530_write(priv, MT753X_MTRAP, val);
+ /* Allow modifying the trap and directly access PHY registers via the
+ * MDIO bus the switch is on.
+ */
+ mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP |
+ MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP);
if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
mt7530_pll_setup(priv);
@@ -2488,8 +2501,11 @@ mt7530_setup(struct dsa_switch *ds)
break;
}
- if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
+ if (priv->p5_mode == MUX_PHY_P0 ||
+ priv->p5_mode == MUX_PHY_P4) {
+ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
mt7530_setup_port5(ds, interface);
+ }
}
#ifdef CONFIG_GPIOLIB