0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 22:16:14 +00:00
openwrt/target/linux/bmips/image/bcm6328.mk
Samuele Longhi ba9c269e1e bmips: bcm6328: add support for D-Link DSL-2750B rev B1
The D-Link DSL-2750B rev B1 (AW4339U) is a wifi fast ethernet router, 2.4 GHz single band
with two external antennas.

This ports the device from old target bcm63xx/generic to bmips/bcm6328.
The hardware is the same of D-Link DSL-2740B rev F1 and DSL-2741B rev F1, plus a usb2 port.

Hardware:
 - SoC: Broadcom BCM63281
 - CPU: single core BMIPS4350 @ 320Mhz
 - RAM: 64 MB (Nanya NT5TU32M16DG)
 - Flash: 8 MB NOR (Macronix MX25L6406ENI-12G)
 - Ethernet LAN: 4x 100Mbit (Broadcom BCM63281)
 - Wifi 2.4 GHz: 802.11bgn (Atheros AR9287)
 - USB: 1x 2.0
 - Buttons: 3x
 - LEDs: 10x
 - UART: yes

Installation via CFE web UI:
  1. Power off the router.
  2. Press reset button near the power switch.
  3. Keep it pressed while powering up during ~20+ seconds.
  4. Browse to http://192.168.1.1 and upload the firmware.
  5. Wait a few minutes for it to finish.

Signed-off-by: Samuele Longhi <agave@dracaena.it>
2024-08-20 16:19:11 +02:00

119 lines
3.0 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0-or-later
define Device/arcadyan_ar7516
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := AR7516
CHIP_ID := 6328
CFE_BOARD_ID := AR7516AAW
FLASH_MB := 8
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43227-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += arcadyan_ar7516
define Device/comtrend_ar-5381u
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5381u
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1241N
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5381u
define Device/comtrend_ar-5387un
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5387un
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1441N1
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5387un
define Device/dlink_dsl-2750b-b1
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DSL-2750B
DEVICE_VARIANT := B1
DEVICE_ALT0_VENDOR := D-Link
DEVICE_ALT0_MODEL := DSL-2740B
DEVICE_ALT0_VARIANT := F1
DEVICE_ALT1_VENDOR := D-Link
DEVICE_ALT1_MODEL := DSL-2741B
DEVICE_ALT1_VARIANT := F1
CFE_BOARD_ID := AW4339U
CHIP_ID := 6328
IMAGES := cfe-EU.bin cfe-AU.bin
IMAGE/cfe-AU.bin := cfe-bin --signature2 "4.06.01.AUF1" --pad 4
IMAGE/cfe-EU.bin := cfe-bin --signature2 "4.06.01.EUF1" --pad 4
DEVICE_PACKAGES += $(USB2_PACKAGES) $(ATH9K_PACKAGES) \
kmod-leds-gpio kmod-leds-bcm6328
endef
TARGET_DEVICES += dlink_dsl-2750b-b1
define Device/innacomm_w3400v6
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Innacomm
DEVICE_MODEL := W3400V6
CHIP_ID := 6328
CFE_BOARD_ID := 96328ang
FLASH_MB := 8
DEVICE_PACKAGES += $(B43_PACKAGES) \
broadcom-4318-sprom kmod-leds-bcm6328
endef
TARGET_DEVICES += innacomm_w3400v6
define Device/inteno_xg6846
$(Device/bcm63xx-cfe-uboot)
DEVICE_VENDOR := Inteno
DEVICE_MODEL := XG6846
CHIP_ID := 6328
CFE_BOARD_ID := 96328avng
FLASH_MB := 16
DEVICE_PACKAGES := $(USB2_PACKAGES) \
kmod-i2c-core kmod-i2c-gpio \
kmod-leds-bcm6328 kmod-dsa-mv88e6xxx \
kmod-sfp
endef
TARGET_DEVICES += inteno_xg6846
define Device/nucom_r5010unv2
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := NuCom
DEVICE_MODEL := R5010UNv2
CHIP_ID := 6328
CFE_BOARD_ID := 96328ang
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += nucom_r5010unv2
define Device/sercomm_ad1018
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := AD1018
CHIP_ID := 6328
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
SERCOMM_FSVER := 1001
SERCOMM_HWVER := 1415153
SERCOMM_SWVER := 3013
endef
TARGET_DEVICES += sercomm_ad1018