Openwrt/openwrt
0
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-22 04:56:15 +00:00
Code Issues Releases Activity
main
openwrt/target/linux/bcm27xx/patches-6.6/950-1182-dts-bcm2712-Dedup-the-aliases-and-overrides.patch
Álvaro Fernández Rojas 0171157d45 bcm27xx: update to latest RPi patches 
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.44..rpi-6.6.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-08-06 18:38:00 +02:00

409 lines
13 KiB
Diff
Raw Permalink Blame History

From e1c56acf3355cd539447511fdc1b886e5eb5cca3 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Thu, 2 May 2024 16:57:31 +0100
Subject: [PATCH 1182/1215] dts: bcm2712: Dedup the aliases and overrides
Move the aliases and overrrides shared by Pi 5 and CM5 into
bcm2712-rpi.dtsi.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
.../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 115 -----------------
.../boot/dts/broadcom/bcm2712-rpi-cm5.dtsi | 114 -----------------
arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi | 117 +++++++++++++++++-
3 files changed, 113 insertions(+), 233 deletions(-)
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -746,122 +746,7 @@ spi10_cs_pins: &spi10_cs_gpio1 {};
};
/ {
- aliases: aliases {
- blconfig = &blconfig;
- blpubkey = &blpubkey;
- bluetooth = &bluetooth;
- console = &uart10;
- ethernet0 = &rp1_eth;
- wifi0 = &wifi;
- fb = &fb;
- mailbox = &mailbox;
- mmc0 = &sdio1;
- uart0 = &uart0;
- uart1 = &uart1;
- uart2 = &uart2;
- uart3 = &uart3;
- uart4 = &uart4;
- uart10 = &uart10;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial10 = &uart10;
- i2c = &i2c_arm;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c10 = &i2c_rp1boot;
- // Bit-bashed i2c_gpios start at 10
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- spi3 = &spi3;
- spi4 = &spi4;
- spi5 = &spi5;
- spi10 = &spi10;
- gpio0 = &gpio;
- gpio1 = &gio;
- gpio2 = &gio_aon;
- gpio3 = &pinctrl;
- gpio4 = &pinctrl_aon;
- usb0 = &rp1_usb0;
- usb1 = &rp1_usb1;
- drm-dsi1 = &dsi0;
- drm-dsi2 = &dsi1;
- };
-
__overrides__ {
- bdaddr = <&bluetooth>, "local-bd-address[";
- button_debounce = <&pwr_key>, "debounce-interval:0";
- cooling_fan = <&fan>, "status", <&rp1_pwm1>, "status";
- uart0_console = <&uart0>,"status", <&aliases>, "console=",&uart0;
- i2c0 = <&i2c0>, "status";
- i2c1 = <&i2c1>, "status";
- i2c = <&i2c1>, "status";
- i2c_arm = <&i2c_arm>, "status";
- i2c_vc = <&i2c_vc>, "status";
- i2c_csi_dsi = <&i2c_csi_dsi>, "status";
- i2c_csi_dsi0 = <&i2c_csi_dsi0>, "status";
- i2c_csi_dsi1 = <&i2c_csi_dsi1>, "status";
- i2c0_baudrate = <&i2c0>, "clock-frequency:0";
- i2c1_baudrate = <&i2c1>, "clock-frequency:0";
- i2c_baudrate = <&i2c_arm>, "clock-frequency:0";
- i2c_arm_baudrate = <&i2c_arm>, "clock-frequency:0";
- i2c_vc_baudrate = <&i2c_vc>, "clock-frequency:0";
- krnbt = <&bluetooth>, "status";
- nvme = <&pciex1>, "status";
- pciex1 = <&pciex1>, "status";
- pciex1_gen = <&pciex1> , "max-link-speed:0";
- pciex1_no_l0s = <&pciex1>, "aspm-no-l0s?";
- pciex1_tperst_clk_ms = <&pciex1>, "brcm,tperst-clk-ms:0";
- pcie_tperst_clk_ms = <&pciex1>, "brcm,tperst-clk-ms:0";
- random = <&random>, "status";
- rtc = <&rpi_rtc>, "status";
- rtc_bbat_vchg = <&rpi_rtc>, "trickle-charge-microvolt:0";
sd_cqe = <&sdio1>, "supports-cqe?";
- spi = <&spi0>, "status";
- suspend = <&pwr_key>, "linux,code:0=205";
- uart0 = <&uart0>, "status";
- wifiaddr = <&wifi>, "local-mac-address[";
-
- act_led_gpio = <&led_act>,"gpios:4",<&led_act>,"gpios:0=",<&gpio>;
- act_led_activelow = <&led_act>,"gpios:8";
- act_led_trigger = <&led_act>, "linux,default-trigger";
- pwr_led_gpio = <&led_pwr>,"gpios:4";
- pwr_led_activelow = <&led_pwr>, "gpios:8";
- pwr_led_trigger = <&led_pwr>, "linux,default-trigger";
- eth_led0 = <&phy1>,"led-modes:0";
- eth_led1 = <&phy1>,"led-modes:4";
- drm_fb0_rp1_dsi0 = <&aliases>, "drm-fb0=",&dsi0;
- drm_fb0_rp1_dsi1 = <&aliases>, "drm-fb0=",&dsi1;
- drm_fb0_rp1_dpi = <&aliases>, "drm-fb0=",&dpi;
- drm_fb0_vc4 = <&aliases>, "drm-fb0=",&vc4;
- drm_fb1_rp1_dsi0 = <&aliases>, "drm-fb1=",&dsi0;
- drm_fb1_rp1_dsi1 = <&aliases>, "drm-fb1=",&dsi1;
- drm_fb1_rp1_dpi = <&aliases>, "drm-fb1=",&dpi;
- drm_fb1_vc4 = <&aliases>, "drm-fb1=",&vc4;
- drm_fb2_rp1_dsi0 = <&aliases>, "drm-fb2=",&dsi0;
- drm_fb2_rp1_dsi1 = <&aliases>, "drm-fb2=",&dsi1;
- drm_fb2_rp1_dpi = <&aliases>, "drm-fb2=",&dpi;
- drm_fb2_vc4 = <&aliases>, "drm-fb2=",&vc4;
-
- fan_temp0 = <&cpu_tepid>,"temperature:0";
- fan_temp1 = <&cpu_warm>,"temperature:0";
- fan_temp2 = <&cpu_hot>,"temperature:0";
- fan_temp3 = <&cpu_vhot>,"temperature:0";
- fan_temp0_hyst = <&cpu_tepid>,"hysteresis:0";
- fan_temp1_hyst = <&cpu_warm>,"hysteresis:0";
- fan_temp2_hyst = <&cpu_hot>,"hysteresis:0";
- fan_temp3_hyst = <&cpu_vhot>,"hysteresis:0";
- fan_temp0_speed = <&fan>, "cooling-levels:4";
- fan_temp1_speed = <&fan>, "cooling-levels:8";
- fan_temp2_speed = <&fan>, "cooling-levels:12";
- fan_temp3_speed = <&fan>, "cooling-levels:16";
};
};
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
@@ -753,108 +753,7 @@ spi10_cs_pins: &spi10_cs_gpio1 {};
};
/ {
- aliases: aliases {
- blconfig = &blconfig;
- blpubkey = &blpubkey;
- bluetooth = &bluetooth;
- console = &uart10;
- ethernet0 = &rp1_eth;
- wifi0 = &wifi;
- fb = &fb;
- mailbox = &mailbox;
- mmc0 = &sdio1;
- uart0 = &uart0;
- uart1 = &uart1;
- uart2 = &uart2;
- uart3 = &uart3;
- uart4 = &uart4;
- uart10 = &uart10;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial10 = &uart10;
- i2c = &i2c_arm;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c10 = &i2c_rp1boot;
- // Bit-bashed i2c_gpios start at 10
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- spi3 = &spi3;
- spi4 = &spi4;
- spi5 = &spi5;
- spi10 = &spi10;
- gpio0 = &gpio;
- gpio1 = &gio;
- gpio2 = &gio_aon;
- gpio3 = &pinctrl;
- gpio4 = &pinctrl_aon;
- usb0 = &rp1_usb0;
- usb1 = &rp1_usb1;
- drm-dsi1 = &dsi0;
- drm-dsi2 = &dsi1;
- };
-
__overrides__ {
- bdaddr = <&bluetooth>, "local-bd-address[";
- button_debounce = <&pwr_key>, "debounce-interval:0";
- cooling_fan = <&fan>, "status", <&rp1_pwm1>, "status";
- uart0_console = <&uart0>,"status", <&aliases>, "console=",&uart0;
- i2c0 = <&i2c0>, "status";
- i2c1 = <&i2c1>, "status";
- i2c = <&i2c1>, "status";
- i2c_arm = <&i2c_arm>, "status";
- i2c_vc = <&i2c_vc>, "status";
- i2c_csi_dsi = <&i2c_csi_dsi>, "status";
- i2c_csi_dsi0 = <&i2c_csi_dsi0>, "status";
- i2c_csi_dsi1 = <&i2c_csi_dsi1>, "status";
- i2c0_baudrate = <&i2c0>, "clock-frequency:0";
- i2c1_baudrate = <&i2c1>, "clock-frequency:0";
- i2c_baudrate = <&i2c_arm>, "clock-frequency:0";
- i2c_arm_baudrate = <&i2c_arm>, "clock-frequency:0";
- i2c_vc_baudrate = <&i2c_vc>, "clock-frequency:0";
- krnbt = <&bluetooth>, "status";
- nvme = <&pciex1>, "status";
- pciex1 = <&pciex1>, "status";
- pciex1_gen = <&pciex1> , "max-link-speed:0";
- pciex1_no_l0s = <&pciex1>, "aspm-no-l0s?";
- pciex1_tperst_clk_ms = <&pciex1>, "brcm,tperst-clk-ms:0";
- pcie_tperst_clk_ms = <&pciex1>, "brcm,tperst-clk-ms:0";
- random = <&random>, "status";
- rtc = <&rpi_rtc>, "status";
- rtc_bbat_vchg = <&rpi_rtc>, "trickle-charge-microvolt:0";
- spi = <&spi0>, "status";
- suspend = <&pwr_key>, "linux,code:0=205";
- uart0 = <&uart0>, "status";
- wifiaddr = <&wifi>, "local-mac-address[";
-
- act_led_activelow = <&led_act>, "active-low?";
- act_led_trigger = <&led_act>, "linux,default-trigger";
- pwr_led_activelow = <&led_pwr>, "gpios:8";
- pwr_led_trigger = <&led_pwr>, "linux,default-trigger";
- eth_led0 = <&phy1>,"led-modes:0";
- eth_led1 = <&phy1>,"led-modes:4";
- drm_fb0_rp1_dsi0 = <&aliases>, "drm-fb0=",&dsi0;
- drm_fb0_rp1_dsi1 = <&aliases>, "drm-fb0=",&dsi1;
- drm_fb0_rp1_dpi = <&aliases>, "drm-fb0=",&dpi;
- drm_fb0_vc4 = <&aliases>, "drm-fb0=",&vc4;
- drm_fb1_rp1_dsi0 = <&aliases>, "drm-fb1=",&dsi0;
- drm_fb1_rp1_dsi1 = <&aliases>, "drm-fb1=",&dsi1;
- drm_fb1_rp1_dpi = <&aliases>, "drm-fb1=",&dpi;
- drm_fb1_vc4 = <&aliases>, "drm-fb1=",&vc4;
- drm_fb2_rp1_dsi0 = <&aliases>, "drm-fb2=",&dsi0;
- drm_fb2_rp1_dsi1 = <&aliases>, "drm-fb2=",&dsi1;
- drm_fb2_rp1_dpi = <&aliases>, "drm-fb2=",&dpi;
- drm_fb2_vc4 = <&aliases>, "drm-fb2=",&vc4;
-
ant1 = <&ant1>,"output-high?=on",
<&ant1>, "output-low?=off",
<&ant2>, "output-high?=off",
@@ -867,18 +766,5 @@ spi10_cs_pins: &spi10_cs_gpio1 {};
<&ant1>, "output-low?=on",
<&ant2>, "output-high?=off",
<&ant2>, "output-low?=on";
-
- fan_temp0 = <&cpu_tepid>,"temperature:0";
- fan_temp1 = <&cpu_warm>,"temperature:0";
- fan_temp2 = <&cpu_hot>,"temperature:0";
- fan_temp3 = <&cpu_vhot>,"temperature:0";
- fan_temp0_hyst = <&cpu_tepid>,"hysteresis:0";
- fan_temp1_hyst = <&cpu_warm>,"hysteresis:0";
- fan_temp2_hyst = <&cpu_hot>,"hysteresis:0";
- fan_temp3_hyst = <&cpu_vhot>,"hysteresis:0";
- fan_temp0_speed = <&fan>, "cooling-levels:4";
- fan_temp1_speed = <&fan>, "cooling-levels:8";
- fan_temp2_speed = <&fan>, "cooling-levels:12";
- fan_temp3_speed = <&fan>, "cooling-levels:16";
};
};
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
@@ -98,14 +98,124 @@
};
/ {
+ aliases: aliases {
+ blconfig = &blconfig;
+ blpubkey = &blpubkey;
+ bluetooth = &bluetooth;
+ console = &uart10;
+ drm-dsi1 = &dsi0;
+ drm-dsi2 = &dsi1;
+ ethernet0 = &rp1_eth;
+ fb = &fb;
+ gpio0 = &gpio;
+ gpio1 = &gio;
+ gpio2 = &gio_aon;
+ gpio3 = &pinctrl;
+ gpio4 = &pinctrl_aon;
+ i2c = &i2c_arm;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c10 = &i2c_rp1boot;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ mailbox = &mailbox;
+ mmc0 = &sdio1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial10 = &uart10;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi10 = &spi10;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ spi5 = &spi5;
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart10 = &uart10;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ uart4 = &uart4;
+ usb0 = &rp1_usb0;
+ usb1 = &rp1_usb1;
+ wifi0 = &wifi;
+ };
+
__overrides__ {
- arm_freq;
+ act_led_gpio = <&led_act>,"gpios:4",<&led_act>,"gpios:0=",<&gpio>;
+ act_led_activelow = <&led_act>, "gpios:8";
+ act_led_trigger = <&led_act>, "linux,default-trigger";
axiperf = <&axiperf>,"status";
-
+ bdaddr = <&bluetooth>, "local-bd-address[";
+ button_debounce = <&pwr_key>, "debounce-interval:0";
+ cooling_fan = <&fan>, "status", <&rp1_pwm1>, "status";
+ drm_fb0_rp1_dpi = <&aliases>, "drm-fb0=",&dpi;
+ drm_fb0_rp1_dsi0 = <&aliases>, "drm-fb0=",&dsi0;
+ drm_fb0_rp1_dsi1 = <&aliases>, "drm-fb0=",&dsi1;
+ drm_fb0_vc4 = <&aliases>, "drm-fb0=",&vc4;
+ drm_fb1_rp1_dpi = <&aliases>, "drm-fb1=",&dpi;
+ drm_fb1_rp1_dsi0 = <&aliases>, "drm-fb1=",&dsi0;
+ drm_fb1_rp1_dsi1 = <&aliases>, "drm-fb1=",&dsi1;
+ drm_fb1_vc4 = <&aliases>, "drm-fb1=",&vc4;
+ drm_fb2_rp1_dpi = <&aliases>, "drm-fb2=",&dpi;
+ drm_fb2_rp1_dsi0 = <&aliases>, "drm-fb2=",&dsi0;
+ drm_fb2_rp1_dsi1 = <&aliases>, "drm-fb2=",&dsi1;
+ drm_fb2_vc4 = <&aliases>, "drm-fb2=",&vc4;
+ eth_led0 = <&phy1>,"led-modes:0";
+ eth_led1 = <&phy1>,"led-modes:4";
+ fan_temp0 = <&cpu_tepid>,"temperature:0";
+ fan_temp0_hyst = <&cpu_tepid>,"hysteresis:0";
+ fan_temp0_speed = <&fan>, "cooling-levels:4";
+ fan_temp1 = <&cpu_warm>,"temperature:0";
+ fan_temp1_hyst = <&cpu_warm>,"hysteresis:0";
+ fan_temp1_speed = <&fan>, "cooling-levels:8";
+ fan_temp2 = <&cpu_hot>,"temperature:0";
+ fan_temp2_hyst = <&cpu_hot>,"hysteresis:0";
+ fan_temp2_speed = <&fan>, "cooling-levels:12";
+ fan_temp3 = <&cpu_vhot>,"temperature:0";
+ fan_temp3_hyst = <&cpu_vhot>,"hysteresis:0";
+ fan_temp3_speed = <&fan>, "cooling-levels:16";
+ i2c = <&i2c1>, "status";
+ i2c_arm = <&i2c_arm>, "status";
+ i2c_arm_baudrate = <&i2c_arm>, "clock-frequency:0";
+ i2c_baudrate = <&i2c_arm>, "clock-frequency:0";
+ i2c_csi_dsi = <&i2c_csi_dsi>, "status";
+ i2c_csi_dsi0 = <&i2c_csi_dsi0>, "status";
+ i2c_csi_dsi1 = <&i2c_csi_dsi1>, "status";
+ i2c_vc = <&i2c_vc>, "status";
+ i2c_vc_baudrate = <&i2c_vc>, "clock-frequency:0";
+ i2c0 = <&i2c0>, "status";
+ i2c0_baudrate = <&i2c0>, "clock-frequency:0";
+ i2c1 = <&i2c1>, "status";
+ i2c1_baudrate = <&i2c1>, "clock-frequency:0";
+ krnbt = <&bluetooth>, "status";
+ nvme = <&pciex1>, "status";
nvmem_cust_rw = <&nvmem_cust>,"rw?";
- nvmem_priv_rw = <&nvmem_priv>,"rw?";
nvmem_mac_rw = <&nvmem_mac>,"rw?";
+ nvmem_priv_rw = <&nvmem_priv>,"rw?";
+ pcie_tperst_clk_ms = <&pciex1>, "brcm,tperst-clk-ms:0";
+ pciex1 = <&pciex1>, "status";
+ pciex1_gen = <&pciex1> , "max-link-speed:0";
+ pciex1_no_l0s = <&pciex1>, "aspm-no-l0s?";
+ pciex1_tperst_clk_ms = <&pciex1>, "brcm,tperst-clk-ms:0";
+ pwr_led_gpio = <&led_pwr>, "gpios:4";
+ pwr_led_activelow = <&led_pwr>, "gpios:8";
+ pwr_led_trigger = <&led_pwr>, "linux,default-trigger";
+ random = <&random>, "status";
+ rtc = <&rpi_rtc>, "status";
+ rtc_bbat_vchg = <&rpi_rtc>, "trickle-charge-microvolt:0";
+ spi = <&spi0>, "status";
strict_gpiod = <&chosen>, "bootargs=pinctrl_rp1.persist_gpio_outputs=n";
+ suspend = <&pwr_key>, "linux,code:0=205";
+ uart0 = <&uart0>, "status";
+ uart0_console = <&uart0>,"status", <&aliases>, "console=",&uart0;
+ wifiaddr = <&wifi>, "local-mac-address[";
cam0_reg = <&cam0_reg>,"status";
cam0_reg_gpio = <&cam0_reg>,"gpio:4",
@@ -113,7 +223,6 @@
cam1_reg = <&cam1_reg>,"status";
cam1_reg_gpio = <&cam1_reg>,"gpio:4",
<&cam1_reg>,"gpio:0=", <&gpio>;
-
};
};
Reference in New Issue View Git Blame Copy Permalink