openwrt/target/linux/bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch

From 24cb07b0c0724a22e474d12e7c2d5b834bf3b076 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Tue, 26 Mar 2024 15:57:46 +0000
Subject: [PATCH 0998/1085] i2c: designware: Add support for bus clear feature

Newer versions of the DesignWare I2C block support the detection of
stuck signals, and a mechanism to recover from them. Add the required
software support to the driver.

This change was prompted by the observation that reading a single byte
from register 0 of a VEML7700 seems to cause it to issue an ACK too
early, and the controller to complain about losing arbitration. There
is a suspicion that this may be a more widespread problem, but at least
this patch prevents the bus from locking up.

See: https://github.com/raspberrypi/linux/issues/6057

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/i2c/busses/i2c-designware-common.c | 12 ++++++++++++
 drivers/i2c/busses/i2c-designware-core.h   |  8 ++++++++
 drivers/i2c/busses/i2c-designware-master.c | 19 ++++++++++++++++++-
 3 files changed, 38 insertions(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -57,6 +57,8 @@ static char *abort_sources[] = {
 		"slave lost the bus while transmitting data to a remote master",
 	[ABRT_SLAVE_RD_INTX] =
 		"incorrect slave-transmitter mode configuration",
+	[ABRT_SLAVE_SDA_STUCK_AT_LOW] =
+		"SDA stuck at low",
 };
 
 static int dw_reg_read(void *context, unsigned int reg, unsigned int *val)
@@ -609,8 +611,16 @@ int i2c_dw_wait_bus_not_busy(struct dw_i
 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 {
 	unsigned long abort_source = dev->abort_source;
+	unsigned int reg;
 	int i;
 
+	if (abort_source & DW_IC_TX_ABRT_SLAVE_SDA_STUCK_AT_LOW) {
+		regmap_write(dev->map, DW_IC_ENABLE,
+			     DW_IC_ENABLE_ENABLE | DW_IC_ENABLE_BUS_RECOVERY);
+		regmap_read_poll_timeout(dev->map, DW_IC_ENABLE, reg,
+					 !(reg & DW_IC_ENABLE_BUS_RECOVERY),
+					 1100, 200000);
+	}
 	if (abort_source & DW_IC_TX_ABRT_NOACK) {
 		for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
 			dev_dbg(dev->dev,
@@ -625,6 +635,8 @@ int i2c_dw_handle_tx_abort(struct dw_i2c
 		return -EAGAIN;
 	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
 		return -EINVAL; /* wrong msgs[] data */
+	else if (abort_source & DW_IC_TX_ABRT_SLAVE_SDA_STUCK_AT_LOW)
+		return -EREMOTEIO;
 	else
 		return -EIO;
 }
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -79,9 +79,12 @@
 #define DW_IC_TX_ABRT_SOURCE			0x80
 #define DW_IC_ENABLE_STATUS			0x9c
 #define DW_IC_CLR_RESTART_DET			0xa8
+#define DW_IC_SCL_STUCK_AT_LOW_TIMEOUT		0xac
+#define DW_IC_SDA_STUCK_AT_LOW_TIMEOUT		0xb0
 #define DW_IC_COMP_PARAM_1			0xf4
 #define DW_IC_COMP_VERSION			0xf8
 #define DW_IC_SDA_HOLD_MIN_VERS			0x3131312A /* "111*" == v1.11* */
+#define DW_IC_BUS_CLEAR_MIN_VERS		0x3230302A /* "200*" == v2.00* */
 #define DW_IC_COMP_TYPE				0xfc
 #define DW_IC_COMP_TYPE_VALUE			0x44570140 /* "DW" + 0x0140 */
 
@@ -111,6 +114,7 @@
 
 #define DW_IC_ENABLE_ENABLE			BIT(0)
 #define DW_IC_ENABLE_ABORT			BIT(1)
+#define DW_IC_ENABLE_BUS_RECOVERY		BIT(3)
 
 #define DW_IC_STATUS_ACTIVITY			BIT(0)
 #define DW_IC_STATUS_TFE			BIT(2)
@@ -118,6 +122,7 @@
 #define DW_IC_STATUS_MASTER_ACTIVITY		BIT(5)
 #define DW_IC_STATUS_SLAVE_ACTIVITY		BIT(6)
 #define DW_IC_STATUS_MASTER_HOLD_TX_FIFO_EMPTY	BIT(7)
+#define DW_IC_STATUS_SDA_STUCK_NOT_RECOVERED	BIT(11)
 
 #define DW_IC_SDA_HOLD_RX_SHIFT			16
 #define DW_IC_SDA_HOLD_RX_MASK			GENMASK(23, 16)
@@ -165,6 +170,7 @@
 #define ABRT_SLAVE_FLUSH_TXFIFO			13
 #define ABRT_SLAVE_ARBLOST			14
 #define ABRT_SLAVE_RD_INTX			15
+#define ABRT_SLAVE_SDA_STUCK_AT_LOW		17
 
 #define DW_IC_TX_ABRT_7B_ADDR_NOACK		BIT(ABRT_7B_ADDR_NOACK)
 #define DW_IC_TX_ABRT_10ADDR1_NOACK		BIT(ABRT_10ADDR1_NOACK)
@@ -180,6 +186,7 @@
 #define DW_IC_RX_ABRT_SLAVE_RD_INTX		BIT(ABRT_SLAVE_RD_INTX)
 #define DW_IC_RX_ABRT_SLAVE_ARBLOST		BIT(ABRT_SLAVE_ARBLOST)
 #define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO	BIT(ABRT_SLAVE_FLUSH_TXFIFO)
+#define DW_IC_TX_ABRT_SLAVE_SDA_STUCK_AT_LOW	BIT(ABRT_SLAVE_SDA_STUCK_AT_LOW)
 
 #define DW_IC_TX_ABRT_NOACK			(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
 						 DW_IC_TX_ABRT_10ADDR1_NOACK | \
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -212,6 +212,7 @@ static int i2c_dw_set_timings_master(str
  */
 static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 {
+	unsigned int timeout = 0;
 	int ret;
 
 	ret = i2c_dw_acquire_lock(dev);
@@ -235,6 +236,17 @@ static int i2c_dw_init_master(struct dw_
 		regmap_write(dev->map, DW_IC_HS_SCL_LCNT, dev->hs_lcnt);
 	}
 
+	if (dev->master_cfg & DW_IC_CON_BUS_CLEAR_CTRL) {
+		/* Set a sensible timeout if not already configured */
+		regmap_read(dev->map, DW_IC_SDA_STUCK_AT_LOW_TIMEOUT, &timeout);
+		if (timeout == ~0) {
+			/* Use 10ms as a timeout, which is 1000 cycles at 100kHz */
+			timeout = i2c_dw_clk_rate(dev) * 10; /* clock rate is in kHz */
+			regmap_write(dev->map, DW_IC_SDA_STUCK_AT_LOW_TIMEOUT, timeout);
+			regmap_write(dev->map, DW_IC_SCL_STUCK_AT_LOW_TIMEOUT, timeout);
+		}
+	}
+
 	/* Write SDA hold time if supported */
 	if (dev->sda_hold_time)
 		regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time);
@@ -1071,6 +1083,7 @@ int i2c_dw_probe_master(struct dw_i2c_de
 	struct i2c_adapter *adap = &dev->adapter;
 	unsigned long irq_flags;
 	unsigned int ic_con;
+	unsigned int id_ver;
 	int ret;
 
 	init_completion(&dev->cmd_complete);
@@ -1106,7 +1119,11 @@ int i2c_dw_probe_master(struct dw_i2c_de
 	if (ret)
 		return ret;
 
-	if (ic_con & DW_IC_CON_BUS_CLEAR_CTRL)
+	ret = regmap_read(dev->map, DW_IC_COMP_VERSION, &id_ver);
+	if (ret)
+		return ret;
+
+	if (ic_con & DW_IC_CON_BUS_CLEAR_CTRL || id_ver >= DW_IC_BUS_CLEAR_MIN_VERS)
 		dev->master_cfg |= DW_IC_CON_BUS_CLEAR_CTRL;
 
 	ret = dev->init(dev);