0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-22 04:56:15 +00:00
openwrt/target/linux/bcm27xx/patches-6.6/950-0825-ARM-dts-Add-BCM2712-D0-dts.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

140 lines
3.6 KiB
Diff

From 0328374ae09c7856e06a63af0c065822474a2985 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 15 Nov 2023 14:48:43 +0000
Subject: [PATCH 0825/1085] ARM: dts: Add BCM2712 D0 dts
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
.../boot/dts/broadcom/bcm2712d0-rpi-5-b.dts | 107 ++++++++++++++++++
arch/arm64/boot/dts/broadcom/Makefile | 1 +
.../boot/dts/broadcom/bcm2712d0-rpi-5-b.dts | 2 +
3 files changed, 110 insertions(+)
create mode 100644 arch/arm/boot/dts/broadcom/bcm2712d0-rpi-5-b.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712d0-rpi-5-b.dts
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2712d0-rpi-5-b.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2712-rpi-5-b.dts"
+
+&gio {
+ brcm,gpio-bank-widths = <32 4>;
+
+ gpio-line-names =
+ "", // GPIO_000
+ "2712_BOOT_CS_N", // GPIO_001
+ "2712_BOOT_MISO", // GPIO_002
+ "2712_BOOT_MOSI", // GPIO_003
+ "2712_BOOT_SCLK", // GPIO_004
+ "", // GPIO_005
+ "", // GPIO_006
+ "", // GPIO_007
+ "", // GPIO_008
+ "", // GPIO_009
+ "", // GPIO_010
+ "", // GPIO_011
+ "", // GPIO_012
+ "", // GPIO_013
+ "PCIE_SDA", // GPIO_014
+ "PCIE_SCL", // GPIO_015
+ "", // GPIO_016
+ "", // GPIO_017
+ "-", // GPIO_018
+ "-", // GPIO_019
+ "PWR_GPIO", // GPIO_020
+ "2712_G21_FS", // GPIO_021
+ "-", // GPIO_022
+ "-", // GPIO_023
+ "BT_RTS", // GPIO_024
+ "BT_CTS", // GPIO_025
+ "BT_TXD", // GPIO_026
+ "BT_RXD", // GPIO_027
+ "WL_ON", // GPIO_028
+ "BT_ON", // GPIO_029
+ "WIFI_SDIO_CLK", // GPIO_030
+ "WIFI_SDIO_CMD", // GPIO_031
+ "WIFI_SDIO_D0", // GPIO_032
+ "WIFI_SDIO_D1", // GPIO_033
+ "WIFI_SDIO_D2", // GPIO_034
+ "WIFI_SDIO_D3"; // GPIO_035
+};
+
+&gio_aon {
+ brcm,gpio-bank-widths = <15 6>;
+
+ gpio-line-names =
+ "RP1_SDA", // AON_GPIO_00
+ "RP1_SCL", // AON_GPIO_01
+ "RP1_RUN", // AON_GPIO_02
+ "SD_IOVDD_SEL", // AON_GPIO_03
+ "SD_PWR_ON", // AON_GPIO_04
+ "SD_CDET_N", // AON_GPIO_05
+ "SD_FLG_N", // AON_GPIO_06
+ "", // AON_GPIO_07
+ "2712_WAKE", // AON_GPIO_08
+ "2712_STAT_LED", // AON_GPIO_09
+ "", // AON_GPIO_10
+ "", // AON_GPIO_11
+ "PMIC_INT", // AON_GPIO_12
+ "UART_TX_FS", // AON_GPIO_13
+ "UART_RX_FS", // AON_GPIO_14
+ "", // AON_GPIO_15
+ "", // AON_GPIO_16
+
+ // Pad bank0 out to 32 entries
+ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+
+ "HDMI0_SCL", // AON_SGPIO_00
+ "HDMI0_SDA", // AON_SGPIO_01
+ "HDMI1_SCL", // AON_SGPIO_02
+ "HDMI1_SDA", // AON_SGPIO_03
+ "PMIC_SCL", // AON_SGPIO_04
+ "PMIC_SDA"; // AON_SGPIO_05
+};
+
+&pinctrl {
+ compatible = "brcm,bcm2712d0-pinctrl";
+ reg = <0x7d504100 0x20>;
+};
+
+&pinctrl_aon {
+ compatible = "brcm,bcm2712d0-aon-pinctrl";
+ reg = <0x7d510700 0x1c>;
+};
+
+&vc4 {
+ compatible = "brcm,bcm2712d0-vc6";
+};
+
+&uart10 {
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi10 {
+ dmas = <&dma40 3>, <&dma40 4>;
+};
+
+&hdmi0 {
+ dmas = <&dma40 (12|(1<<30)|(1<<24)|(10<<16)|(15<<20))>;
+};
+
+&hdmi1 {
+ dmas = <&dma40 (13|(1<<30)|(1<<24)|(10<<16)|(15<<20))>;
+};
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rp
dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4s.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2712-rpi-5-b.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2712d0-rpi-5-b.dtb
subdir-y += bcmbca
subdir-y += northstar2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712d0-rpi-5-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "../../../../arm/boot/dts/broadcom/bcm2712d0-rpi-5-b.dts"