mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-22 04:56:15 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
128 lines
4.6 KiB
Diff
128 lines
4.6 KiB
Diff
From 35bdac469b974f1fcca32c31dec90867c7fe1fa4 Mon Sep 17 00:00:00 2001
|
|
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Date: Tue, 16 May 2023 15:51:54 +0300
|
|
Subject: [PATCH 0781/1085] media: rp1: Drop LE handling
|
|
|
|
The driver registers for line-end interrupts, but never uses them. This
|
|
just causes extra interrupt load, with more complexity in the driver.
|
|
|
|
Drop the LE handling. It can easily be added back if later needed.
|
|
|
|
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
---
|
|
.../media/platform/raspberrypi/rp1_cfe/cfe.c | 6 ++--
|
|
.../media/platform/raspberrypi/rp1_cfe/csi2.c | 28 ++++---------------
|
|
.../media/platform/raspberrypi/rp1_cfe/csi2.h | 2 +-
|
|
3 files changed, 10 insertions(+), 26 deletions(-)
|
|
|
|
--- a/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
|
|
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
|
|
@@ -734,13 +734,13 @@ static irqreturn_t cfe_isr(int irq, void
|
|
{
|
|
struct cfe_device *cfe = dev;
|
|
unsigned int i;
|
|
- bool sof[NUM_NODES] = {0}, eof[NUM_NODES] = {0}, lci[NUM_NODES] = {0};
|
|
+ bool sof[NUM_NODES] = {0}, eof[NUM_NODES] = {0};
|
|
u32 sts;
|
|
|
|
sts = cfg_reg_read(cfe, MIPICFG_INTS);
|
|
|
|
if (sts & MIPICFG_INT_CSI_DMA)
|
|
- csi2_isr(&cfe->csi2, sof, eof, lci);
|
|
+ csi2_isr(&cfe->csi2, sof, eof);
|
|
|
|
if (sts & MIPICFG_INT_PISP_FE)
|
|
pisp_fe_isr(&cfe->fe, sof + CSI2_NUM_CHANNELS,
|
|
@@ -757,7 +757,7 @@ static irqreturn_t cfe_isr(int irq, void
|
|
* generate interrupts even though the node is not streaming.
|
|
*/
|
|
if (!check_state(cfe, NODE_STREAMING, i) ||
|
|
- !(sof[i] || eof[i] || lci[i]))
|
|
+ !(sof[i] || eof[i]))
|
|
continue;
|
|
|
|
/*
|
|
--- a/drivers/media/platform/raspberrypi/rp1_cfe/csi2.c
|
|
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/csi2.c
|
|
@@ -258,7 +258,7 @@ static void csi2_isr_handle_errors(struc
|
|
spin_unlock(&csi2->errors_lock);
|
|
}
|
|
|
|
-void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof, bool *lci)
|
|
+void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof)
|
|
{
|
|
unsigned int i;
|
|
u32 status;
|
|
@@ -290,7 +290,6 @@ void csi2_isr(struct csi2_device *csi2,
|
|
|
|
sof[i] = !!(status & IRQ_FS(i));
|
|
eof[i] = !!(status & IRQ_FE_ACK(i));
|
|
- lci[i] = !!(status & IRQ_LE_ACK(i));
|
|
}
|
|
|
|
if (csi2_track_errors)
|
|
@@ -405,16 +404,12 @@ void csi2_start_channel(struct csi2_devi
|
|
|
|
csi2_dbg("%s [%u]\n", __func__, channel);
|
|
|
|
- /*
|
|
- * Disable the channel, but ensure N != 0! Otherwise we end up with a
|
|
- * spurious LE + LE_ACK interrupt when re-enabling the channel.
|
|
- */
|
|
- csi2_reg_write(csi2, CSI2_CH_CTRL(channel), 0x100 << __ffs(LC_MASK));
|
|
+ csi2_reg_write(csi2, CSI2_CH_CTRL(channel), 0);
|
|
csi2_reg_write(csi2, CSI2_CH_DEBUG(channel), 0);
|
|
csi2_reg_write(csi2, CSI2_STATUS, IRQ_CH_MASK(channel));
|
|
|
|
- /* Enable channel and FS/FE/LE interrupts. */
|
|
- ctrl = DMA_EN | IRQ_EN_FS | IRQ_EN_FE_ACK | IRQ_EN_LE_ACK | PACK_LINE;
|
|
+ /* Enable channel and FS/FE interrupts. */
|
|
+ ctrl = DMA_EN | IRQ_EN_FS | IRQ_EN_FE_ACK | PACK_LINE;
|
|
/* PACK_BYTES ensures no striding for embedded data. */
|
|
if (pack_bytes)
|
|
ctrl |= PACK_BYTES;
|
|
@@ -423,21 +418,11 @@ void csi2_start_channel(struct csi2_devi
|
|
ctrl |= AUTO_ARM;
|
|
|
|
if (width && height) {
|
|
- int line_int_freq = height >> 2;
|
|
-
|
|
- line_int_freq = min(max(0x80, line_int_freq), 0x3ff);
|
|
- set_field(&ctrl, line_int_freq, LC_MASK);
|
|
set_field(&ctrl, mode, CH_MODE_MASK);
|
|
csi2_reg_write(csi2, CSI2_CH_FRAME_SIZE(channel),
|
|
(height << 16) | width);
|
|
} else {
|
|
- /*
|
|
- * Do not disable line interrupts for the embedded data channel,
|
|
- * set it to the maximum value. This avoids spamming the ISR
|
|
- * with spurious line interrupts.
|
|
- */
|
|
- set_field(&ctrl, 0x3ff, LC_MASK);
|
|
- set_field(&ctrl, 0x00, CH_MODE_MASK);
|
|
+ set_field(&ctrl, 0x0, CH_MODE_MASK);
|
|
csi2_reg_write(csi2, CSI2_CH_FRAME_SIZE(channel), 0);
|
|
}
|
|
|
|
@@ -452,8 +437,7 @@ void csi2_stop_channel(struct csi2_devic
|
|
csi2_dbg("%s [%u]\n", __func__, channel);
|
|
|
|
/* Channel disable. Use FORCE to allow stopping mid-frame. */
|
|
- csi2_reg_write(csi2, CSI2_CH_CTRL(channel),
|
|
- (0x100 << __ffs(LC_MASK)) | FORCE);
|
|
+ csi2_reg_write(csi2, CSI2_CH_CTRL(channel), FORCE);
|
|
/* Latch the above change by writing to the ADDR0 register. */
|
|
csi2_reg_write(csi2, CSI2_CH_ADDR0(channel), 0);
|
|
/* Write this again, the HW needs it! */
|
|
--- a/drivers/media/platform/raspberrypi/rp1_cfe/csi2.h
|
|
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/csi2.h
|
|
@@ -71,7 +71,7 @@ struct csi2_device {
|
|
u32 discards_dt_table[DISCARDS_TABLE_NUM_ENTRIES];
|
|
};
|
|
|
|
-void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof, bool *lci);
|
|
+void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof);
|
|
void csi2_set_buffer(struct csi2_device *csi2, unsigned int channel,
|
|
dma_addr_t dmaaddr, unsigned int stride,
|
|
unsigned int size);
|