mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-25 06:26:15 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
36 lines
1.4 KiB
Diff
36 lines
1.4 KiB
Diff
From 665ff200d402e36937e42d9a710e4d11343f35e8 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Tue, 3 Jan 2023 16:00:21 +0000
|
|
Subject: [PATCH 0409/1085] net: phy: broadcom: Make LEDs 3+4 shadow LEDs 1+2
|
|
|
|
CM4 uses BCM54210PE, which supports 2 additional LEDs, choosing LED3
|
|
for the amber LED because it shows activity by default (LED4 is not
|
|
connected). However, this makes it uncontrollable by the eth_led<n>
|
|
dtparams which target LEDs 1+2.
|
|
|
|
Solve the problem by making LEDs 3+4 mirror LEDs 1+2 (which is much
|
|
simpler than adding baseboard-specific overrides, but comes with a
|
|
risk of making one of the LEDs redundant).
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/5289
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
drivers/net/phy/broadcom.c | 5 +++++
|
|
1 file changed, 5 insertions(+)
|
|
|
|
--- a/drivers/net/phy/broadcom.c
|
|
+++ b/drivers/net/phy/broadcom.c
|
|
@@ -429,6 +429,11 @@ static int bcm54xx_config_init(struct ph
|
|
val = BCM54XX_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
|
|
BCM54XX_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
|
|
bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDS1, val);
|
|
+ /* BCM54210PE controls two extra LEDs with the next register.
|
|
+ * Make them shadow the first pair of LEDs - useful on CM4 which
|
|
+ * uses LED3 for ETH_LEDY instead of LED1.
|
|
+ */
|
|
+ bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDS1 + 1, val);
|
|
|
|
val = BCM_LED_MULTICOLOR_IN_PHASE |
|
|
BCM54XX_SHD_LEDS1_LED1(led_modes[0]) |
|