mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-25 06:26:15 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
224 lines
6.9 KiB
Diff
224 lines
6.9 KiB
Diff
From 403d49f64c1eed20d19e8b87669b30382be6e006 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Thu, 5 May 2022 15:46:07 +0100
|
|
Subject: [PATCH 0371/1085] hwmon: emc2305: fixups for driver submitted to
|
|
mailing lists
|
|
|
|
The driver had a number of issues, checkpatch warnings/errors,
|
|
and other limitations, so fix these up to make it usable.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
|
|
hwmon: emc2305: Add calls to initialise of cooling maps
|
|
|
|
Commit 46ef9d4ed26b ("hwmon: emc2305: fixups for driver submitted to
|
|
mailing lists") missed adding the call to thermal_of_cooling_device_register
|
|
required to configure any cooling maps for the device, hence stopping it
|
|
from actually ever changing speed.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
|
|
hwmon: emc2305: Change OF properties pwm-min & pwm-max to u8
|
|
|
|
There is no DT binding for emc2305 as mainline are still
|
|
discussing how to do a generic fan binding.
|
|
The 5.15 driver was reading the "emc2305," properties
|
|
"cooling-levels", "pwm-max", "pwm-min", and "pwm-channel" as u8.
|
|
The overlay was writing them as u16 (;) so it was working.
|
|
|
|
The 6.1 driver was reading as u32, which failed as there is
|
|
insufficient data.
|
|
|
|
As this is all downstream only, revert to u8 to match 5.15.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
drivers/hwmon/emc2305.c | 95 +++++++++++++++++++++++++++++++++++++----
|
|
1 file changed, 87 insertions(+), 8 deletions(-)
|
|
|
|
--- a/drivers/hwmon/emc2305.c
|
|
+++ b/drivers/hwmon/emc2305.c
|
|
@@ -15,12 +15,13 @@
|
|
static const unsigned short
|
|
emc2305_normal_i2c[] = { 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d, I2C_CLIENT_END };
|
|
|
|
+#define EMC2305_REG_FAN_STATUS 0x24
|
|
+#define EMC2305_REG_FAN_STALL_STATUS 0x25
|
|
#define EMC2305_REG_DRIVE_FAIL_STATUS 0x27
|
|
#define EMC2305_REG_VENDOR 0xfe
|
|
#define EMC2305_FAN_MAX 0xff
|
|
#define EMC2305_FAN_MIN 0x00
|
|
#define EMC2305_FAN_MAX_STATE 10
|
|
-#define EMC2305_DEVICE 0x34
|
|
#define EMC2305_VENDOR 0x5d
|
|
#define EMC2305_REG_PRODUCT_ID 0xfd
|
|
#define EMC2305_TACH_REGS_UNUSE_BITS 3
|
|
@@ -39,6 +40,7 @@ emc2305_normal_i2c[] = { 0x27, 0x2c, 0x2
|
|
#define EMC2305_RPM_FACTOR 3932160
|
|
|
|
#define EMC2305_REG_FAN_DRIVE(n) (0x30 + 0x10 * (n))
|
|
+#define EMC2305_REG_FAN_CFG(n) (0x32 + 0x10 * (n))
|
|
#define EMC2305_REG_FAN_MIN_DRIVE(n) (0x38 + 0x10 * (n))
|
|
#define EMC2305_REG_FAN_TACH(n) (0x3e + 0x10 * (n))
|
|
|
|
@@ -58,6 +60,15 @@ static const struct i2c_device_id emc230
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, emc2305_ids);
|
|
|
|
+static const struct of_device_id emc2305_dt_ids[] = {
|
|
+ { .compatible = "microchip,emc2305" },
|
|
+ { .compatible = "microchip,emc2303" },
|
|
+ { .compatible = "microchip,emc2302" },
|
|
+ { .compatible = "microchip,emc2301" },
|
|
+ { }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, emc2305_dt_ids);
|
|
+
|
|
/**
|
|
* struct emc2305_cdev_data - device-specific cooling device state
|
|
* @cdev: cooling device
|
|
@@ -103,6 +114,7 @@ struct emc2305_data {
|
|
u8 pwm_num;
|
|
bool pwm_separate;
|
|
u8 pwm_min[EMC2305_PWM_MAX];
|
|
+ u8 pwm_max;
|
|
struct emc2305_cdev_data cdev_data[EMC2305_PWM_MAX];
|
|
};
|
|
|
|
@@ -275,7 +287,7 @@ static int emc2305_set_pwm(struct device
|
|
struct i2c_client *client = data->client;
|
|
int ret;
|
|
|
|
- if (val < data->pwm_min[channel] || val > EMC2305_FAN_MAX)
|
|
+ if (val < data->pwm_min[channel] || val > data->pwm_max)
|
|
return -EINVAL;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_DRIVE(channel), val);
|
|
@@ -286,6 +298,49 @@ static int emc2305_set_pwm(struct device
|
|
return 0;
|
|
}
|
|
|
|
+static int emc2305_get_tz_of(struct device *dev)
|
|
+{
|
|
+ struct device_node *np = dev->of_node;
|
|
+ struct emc2305_data *data = dev_get_drvdata(dev);
|
|
+ int ret = 0;
|
|
+ u8 val;
|
|
+ int i;
|
|
+
|
|
+ /* OF parameters are optional - overwrite default setting
|
|
+ * if some of them are provided.
|
|
+ */
|
|
+
|
|
+ ret = of_property_read_u8(np, "emc2305,cooling-levels", &val);
|
|
+ if (!ret)
|
|
+ data->max_state = val;
|
|
+ else if (ret != -EINVAL)
|
|
+ return ret;
|
|
+
|
|
+ ret = of_property_read_u8(np, "emc2305,pwm-max", &val);
|
|
+ if (!ret)
|
|
+ data->pwm_max = val;
|
|
+ else if (ret != -EINVAL)
|
|
+ return ret;
|
|
+
|
|
+ ret = of_property_read_u8(np, "emc2305,pwm-min", &val);
|
|
+ if (!ret)
|
|
+ for (i = 0; i < EMC2305_PWM_MAX; i++)
|
|
+ data->pwm_min[i] = val;
|
|
+ else if (ret != -EINVAL)
|
|
+ return ret;
|
|
+
|
|
+ /* Not defined or 0 means one thermal zone over all cooling devices.
|
|
+ * Otherwise - separated thermal zones for each PWM channel.
|
|
+ */
|
|
+ ret = of_property_read_u8(np, "emc2305,pwm-channel", &val);
|
|
+ if (!ret)
|
|
+ data->pwm_separate = (val != 0);
|
|
+ else if (ret != -EINVAL)
|
|
+ return ret;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int emc2305_set_single_tz(struct device *dev, int idx)
|
|
{
|
|
struct emc2305_data *data = dev_get_drvdata(dev);
|
|
@@ -295,9 +350,17 @@ static int emc2305_set_single_tz(struct
|
|
cdev_idx = (idx) ? idx - 1 : 0;
|
|
pwm = data->pwm_min[cdev_idx];
|
|
|
|
- data->cdev_data[cdev_idx].cdev =
|
|
- thermal_cooling_device_register(emc2305_fan_name[idx], data,
|
|
- &emc2305_cooling_ops);
|
|
+ if (dev->of_node)
|
|
+ data->cdev_data[cdev_idx].cdev =
|
|
+ devm_thermal_of_cooling_device_register(dev, dev->of_node,
|
|
+ emc2305_fan_name[idx],
|
|
+ data,
|
|
+ &emc2305_cooling_ops);
|
|
+ else
|
|
+ data->cdev_data[cdev_idx].cdev =
|
|
+ thermal_cooling_device_register(emc2305_fan_name[idx],
|
|
+ data,
|
|
+ &emc2305_cooling_ops);
|
|
|
|
if (IS_ERR(data->cdev_data[cdev_idx].cdev)) {
|
|
dev_err(dev, "Failed to register cooling device %s\n", emc2305_fan_name[idx]);
|
|
@@ -350,9 +413,11 @@ static void emc2305_unset_tz(struct devi
|
|
int i;
|
|
|
|
/* Unregister cooling device. */
|
|
- for (i = 0; i < EMC2305_PWM_MAX; i++)
|
|
- if (data->cdev_data[i].cdev)
|
|
- thermal_cooling_device_unregister(data->cdev_data[i].cdev);
|
|
+ if (!dev->of_node) {
|
|
+ for (i = 0; i < EMC2305_PWM_MAX; i++)
|
|
+ if (data->cdev_data[i].cdev)
|
|
+ thermal_cooling_device_unregister(data->cdev_data[i].cdev);
|
|
+ }
|
|
}
|
|
|
|
static umode_t
|
|
@@ -574,11 +639,18 @@ static int emc2305_probe(struct i2c_clie
|
|
data->pwm_separate = pdata->pwm_separate;
|
|
for (i = 0; i < EMC2305_PWM_MAX; i++)
|
|
data->pwm_min[i] = pdata->pwm_min[i];
|
|
+ data->pwm_max = EMC2305_FAN_MAX;
|
|
} else {
|
|
data->max_state = EMC2305_FAN_MAX_STATE;
|
|
data->pwm_separate = false;
|
|
for (i = 0; i < EMC2305_PWM_MAX; i++)
|
|
data->pwm_min[i] = EMC2305_FAN_MIN;
|
|
+ data->pwm_max = EMC2305_FAN_MAX;
|
|
+ if (dev->of_node) {
|
|
+ ret = emc2305_get_tz_of(dev);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ }
|
|
}
|
|
|
|
data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "emc2305", data,
|
|
@@ -599,6 +671,12 @@ static int emc2305_probe(struct i2c_clie
|
|
return ret;
|
|
}
|
|
|
|
+ /* Acknowledge any existing faults. Stops the device responding on the
|
|
+ * SMBus alert address.
|
|
+ */
|
|
+ i2c_smbus_read_byte_data(client, EMC2305_REG_FAN_STALL_STATUS);
|
|
+ i2c_smbus_read_byte_data(client, EMC2305_REG_FAN_STATUS);
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
@@ -614,6 +692,7 @@ static struct i2c_driver emc2305_driver
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "emc2305",
|
|
+ .of_match_table = emc2305_dt_ids,
|
|
},
|
|
.probe = emc2305_probe,
|
|
.remove = emc2305_remove,
|