0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-22 04:56:15 +00:00
openwrt/target/linux/bcm27xx/patches-6.6/950-0238-media-bcm2835-unicam-Always-service-interrupts.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

52 lines
1.6 KiB
Diff

From 53814cec0f6ff922f087d4226af6ed73f502f89f Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 13 May 2020 18:28:27 +0100
Subject: [PATCH 0238/1085] media: bcm2835-unicam: Always service interrupts
From when bringing up the driver, there was a check in the isr
to ignore interrupts (claiming them handled) should the driver
not be streaming.
The VPU now will not register a camera driver if it finds a
CSI2 node enabled in device tree, therefore this flawed check is
redundant.
https://github.com/raspberrypi/linux/issues/3602
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/platform/bcm2835/bcm2835-unicam.c | 15 ---------------
1 file changed, 15 deletions(-)
--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c
+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c
@@ -784,12 +784,6 @@ static bool unicam_all_nodes_streaming(s
return ret;
}
-static bool unicam_all_nodes_disabled(struct unicam_device *dev)
-{
- return !dev->node[IMAGE_PAD].streaming &&
- !dev->node[METADATA_PAD].streaming;
-}
-
static void unicam_queue_event_sof(struct unicam_device *unicam)
{
struct v4l2_event event = {
@@ -817,15 +811,6 @@ static irqreturn_t unicam_isr(int irq, v
u32 ista, sta;
u64 ts;
- /*
- * Don't service interrupts if not streaming.
- * Avoids issues if the VPU should enable the
- * peripheral without the kernel knowing (that
- * shouldn't happen, but causes issues if it does).
- */
- if (unicam_all_nodes_disabled(unicam))
- return IRQ_NONE;
-
sta = reg_read(unicam, UNICAM_STA);
/* Write value back to clear the interrupts */
reg_write(unicam, UNICAM_STA, sta);