Openwrt/openwrt
0
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 14:06:15 +00:00
Code Issues Releases Activity
main
openwrt/target/linux/ath79/image/tiny.mk
INAGAKI Hiroshi ba723a3f6c ath79: add support for NEC Aterm WG600HP 
NEC Aterm WG600HP is a 2.4/5 GHz band 11n (Wi-Fi 4) router, based on
AR9344.

Specification:

- SoC             : Atheros AR9344
- RAM             : DDR2 128 MiB (2x Hynix H5PS5162GFR-S6C)
- Flash           : SPI-NOR 8 MiB (Macronix MX25L6406EMI-12G)
- WLAN            : 2.4/5 GHz 2T2R
  - 2.4 GHz       : Atheros AR9344 (SoC)
  - 5 GHz         : Atheros AR9382
- Ethernet        : 5x 10/100/1000 Mbps
  - switch        : Atheros AR8327
- LEDs/Keys (GPIO): 10x/4x
  - note          : all LEDs are controlled by ath9k chip (AR9382)
- UART            : through-hole on PCB
  - assignment    : 3.3V, GND, NC, TX, RX from tri-angle marking
  - settings      : 9600n8
- USB             : 1x USB 2.0 Type-A
  - hub (internal): NEC uPD720114
- Power           : 12 VDC, 1.5 A (Max. 16 W)
- Stock OS        : NetBSD based

Flash instruction using initramfs-factory.bin image (StockFW WebUI):

1. Boot WG600HP with router mode normally
2. Access to the WebUI ("http://aterm.me/" or "http://192.168.0.1/") on
   the device and open firmware update page ("ファームウェア更新")
3. Select the OpenWrt initramfs-factory.bin image and click update
   ("更新") button
4. After updating, the device will be rebooted and booted with OpenWrt
   initramfs image
5. On the initramfs image, upload (or download) uboot.bin and
   sysupgrade.bin image to the device
6. Replace the bootloader with a uboot.bin image

   mtd write <uboot.bin image> bootloader

7. Perform sysupgrade with a sysupgrade.bin image

   sysupgrade <sysupgrade image>

8. Wait ~120 seconds to complete flashing

Flash instruction using initramfs-factory.bin image (bootloader CLI):

 1. Connect and open serial console
 2. Power on WG600HP and interrupt bootloader by ESC key
 3. Login to the bootloader CLI with a password "chiron"
 4. Start TFTP server by "tftpd" command
 5. Upload initramfs-factory.bin via tftp from your computer

   example (Windows): tftp -i 192.168.0.1 PUT initramfs-factory.bin

 6. Boot initramfs image by "boot" command
 7. On the initramfs image, back up the stock bootloader and firmware if
   needed
 8. Upload (or download) uboot.bin and sysupgrade.bin image to the device
 9. Replace the bootloader with a uboot.bin image
10. Perform sysupgrade with a sysupgrade.bin image
11. Wait ~120 seconds to complete flashing

Notes:

- All LEDs are connected to the GPIO controller on the ath9k chip
  (AR9382) and controlled by it. Those LEDs are probed after probing of
  ath9k chip, so they cannot be handled as status LEDs of OpenWrt while
  booting.

- A reset pin of the internal USB hub is connected to the GPIO
  controller of the ath9k chip, like LEDs above. That hub will be
  detected after probing of the ath9k chip.

- The stock bootloader requires an unknown filesystem on firmware area
  in the flash. Booting of OpenWrt from that filesystem cannot be
  handled, so the bootloader needs to be replaced to mainline U-Boot
  before OpenWrt installation.

MAC Addresses:

LAN    : A4:12:42:xx:xx:A0 (config,  0x6 (hex))
WAN    : A4:12:42:xx:xx:A1 (config,  0xc (hex))
2.4 GHz: A4:12:42:xx:xx:A2 (config,  0x0 (hex) / art, 0x1002 (hex))
5 GHz  : A4:12:42:xx:xx:A3 (config, 0x12 (hex) / art, 0x5002 (hex))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15432
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-28 18:47:56 +02:00

164 lines
3.9 KiB
Makefile
Raw Permalink Blame History

include ./common-buffalo.mk
include ./common-nec.mk
include ./common-senao.mk
define Device/buffalo_whr-g301n
$(Device/buffalo_common)
SOC := ar7240
DEVICE_MODEL := WHR-G301N
BUFFALO_PRODUCT := WHR-G301N
IMAGE_SIZE := 3712k
SUPPORTED_DEVICES += whr-g301n
DEFAULT := n
endef
TARGET_DEVICES += buffalo_whr-g301n
define Device/dlink_dap-1720-a1
$(Device/seama)
SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-1720
DEVICE_VARIANT := A1
IMAGE_SIZE := 15872k
SEAMA_SIGNATURE := wapac28_dlink.2015_dap1720
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca988x-ct \
kmod-ath10k-ct-smallbuffers rssileds
endef
TARGET_DEVICES += dlink_dap-1720-a1
define Device/dlink_dir-615-e4
SOC := ar7240
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-615
DEVICE_VARIANT := E4
IMAGE_SIZE := 3776k
FACTORY_IMAGE_SIZE := 3456k
IMAGES += factory.bin
IMAGE/default := append-kernel | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
IMAGE/factory.bin := $$(IMAGE/default) | \
check-size $$$$(FACTORY_IMAGE_SIZE) | pad-to $$$$(FACTORY_IMAGE_SIZE) | \
append-string "AP99-AR7240-RT-091105-05"
SUPPORTED_DEVICES += dir-615-e4
DEFAULT := n
endef
TARGET_DEVICES += dlink_dir-615-e4
define Device/dlink_dir-859-a
$(Device/seama)
SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-859
IMAGE_SIZE := 15872k
SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers
endef
define Device/dlink_dir-859-a1
$(Device/dlink_dir-859-a)
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-859-a1
define Device/dlink_dir-859-a3
$(Device/dlink_dir-859-a)
DEVICE_VARIANT := A3
endef
TARGET_DEVICES += dlink_dir-859-a3
define Device/dlink_dir-869-a1
$(Device/seama)
SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-869
DEVICE_VARIANT := A1
IMAGE_SIZE := 15872k
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers
SUPPORTED_DEVICES += dir-869-a1
endef
TARGET_DEVICES += dlink_dir-869-a1
define Device/engenius_eap350-v1
$(Device/senao_loader_okli)
BLOCKSIZE := 4k
SOC := ar7242
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-eap350
DEFAULT := n
endef
TARGET_DEVICES += engenius_eap350-v1
define Device/engenius_ecb350-v1
$(Device/senao_loader_okli)
BLOCKSIZE := 4k
SOC := ar7242
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ECB350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-ecb350
DEFAULT := n
endef
TARGET_DEVICES += engenius_ecb350-v1
define Device/engenius_enh202-v1
$(Device/senao_loader_okli)
SOC := ar7240
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENH202
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-enh202
DEFAULT := n
endef
TARGET_DEVICES += engenius_enh202-v1
define Device/nec_wg600hp
DEVICE_MODEL := Aterm WG600HP
SOC := ar9344
BLOCKSIZE := 4k
IMAGE_SIZE := 7936k
NEC_FW_TYPE := H044
$(Device/nec-netbsd-aterm)
endef
TARGET_DEVICES += nec_wg600hp
define Device/nec_wr8750n
SOC := ar9344
DEVICE_MODEL := Aterm WR8750N
BLOCKSIZE := 4k
IMAGE_SIZE := 7936k
NEC_FW_TYPE := H033a
$(Device/nec-netbsd-aterm)
endef
TARGET_DEVICES += nec_wr8750n
define Device/nec_wr9500n
SOC := ar9344
DEVICE_MODEL := Aterm WR9500N
BLOCKSIZE := 4k
IMAGE_SIZE := 16128k
NEC_FW_TYPE := H033
$(Device/nec-netbsd-aterm)
endef
TARGET_DEVICES += nec_wr9500n
define Device/pqi_air-pen
SOC := ar9330
DEVICE_VENDOR := PQI
DEVICE_MODEL := Air-Pen
DEVICE_PACKAGES := kmod-usb-chipidea2
IMAGE_SIZE := 7680k
SUPPORTED_DEVICES += pqi-air-pen
DEFAULT := n
endef
TARGET_DEVICES += pqi_air-pen
Reference in New Issue View Git Blame Copy Permalink