mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-24 14:06:15 +00:00
6691ff86b7
The last "syscfg" partition of the OEM firmware turns out to be a
UBIFS used to store user data, just as the "rootfs_data" of OpenWrt,
so it should be reasonable to absorb it into the "ubi" partition.
Factory installations via either OEM firmware or tftp, or by forcibly
flashing factory image to mtd5 (firmware) partition with mtd tool are
confirmed working, but the UBI remaining inside "syscfg" partition
could break upgrade. Fortunately, installing kmod-mtd-rw and erasing
"syscfg" partition before upgrade is confirmed working, in which case,
"ubi" will automatically expand to the blank space once occupied by
the former mtd8 (syscfg), with the total block number increased, but
the UBIFS for rootfs_data will not automatically claim the newly
available space (since it is created when mtd8 still exists, and
sysupgrade does not set "autoresize" flag to rootfs_data). These space
will be claimed during the next upgrade, when rootfs_data is removed
and created again.
Fixes: 50f727b7737d1 ("ath79: add support for Linksys EA4500 v3")
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/14791
Signed-off-by: Robert Marko <robimarko@gmail.com>
526 lines
15 KiB
Makefile
526 lines
15 KiB
Makefile
define Build/dongwon-header
|
|
head -c 4 $@ > $@.tmp
|
|
head -c 8 /dev/zero >> $@.tmp
|
|
tail -c +9 $@ >> $@.tmp
|
|
( \
|
|
header_crc="$$(head -c 68 $@.tmp | gzip -c | \
|
|
tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
|
|
printf "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
|
|
dd of=$@.tmp bs=4 count=1 seek=1 conv=notrunc \
|
|
)
|
|
mv $@.tmp $@
|
|
endef
|
|
|
|
define Build/meraki-header
|
|
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
|
|
-B $(1) -s \
|
|
-i $@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
# attention: only zlib compression is allowed for the boot fs
|
|
define Build/zyxel-buildkerneljffs
|
|
mkdir -p $@.tmp/boot
|
|
cp $@ $@.tmp/boot/vmlinux.lzma.uImage
|
|
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
|
|
--big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
|
|
-o $@ \
|
|
-d $@.tmp
|
|
rm -rf $@.tmp
|
|
endef
|
|
|
|
define Build/zyxel-factory
|
|
let \
|
|
maxsize="$(call exp_units,$(RAS_ROOTFS_SIZE))"; \
|
|
let size="$$(stat -c%s $@)"; \
|
|
if [ $$size -lt $$maxsize ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkrasimage \
|
|
-b $(RAS_BOARD) \
|
|
-v $(RAS_VERSION) \
|
|
-r $@ \
|
|
-s $$maxsize \
|
|
-o $@.new \
|
|
-l 131072 \
|
|
&& mv $@.new $@ ; \
|
|
fi
|
|
endef
|
|
|
|
define Device/8dev_rambutan
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := 8devices
|
|
DEVICE_MODEL := Rambutan
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := factory.bin sysupgrade.tar
|
|
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-ubi
|
|
endef
|
|
TARGET_DEVICES += 8dev_rambutan
|
|
|
|
define Device/aerohive_hiveap-121
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Aerohive
|
|
DEVICE_MODEL := HiveAP 121
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 116m
|
|
KERNEL_SIZE := 5120k
|
|
UBINIZE_OPTS := -E 5
|
|
SUPPORTED_DEVICES += hiveap-121
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += aerohive_hiveap-121
|
|
|
|
define Device/domywifi_dw33d
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := DomyWifi
|
|
DEVICE_MODEL := DW33D
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport \
|
|
kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
KERNEL_SIZE := 5120k
|
|
IMAGE_SIZE := 98304k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += domywifi_dw33d
|
|
|
|
define Device/dongwon_dw02-412h
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := Dongwon T&I
|
|
DEVICE_MODEL := DW02-412H
|
|
DEVICE_ALT0_VENDOR := KT
|
|
DEVICE_ALT0_MODEL := GiGA WiFi home
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
KERNEL_SIZE := 8192k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL := $$(KERNEL) | dongwon-header
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/dongwon_dw02-412h-64m
|
|
$(Device/dongwon_dw02-412h)
|
|
DEVICE_VARIANT := (64M)
|
|
DEVICE_ALT0_VARIANT := (64M)
|
|
IMAGE_SIZE := 49152k
|
|
endef
|
|
TARGET_DEVICES += dongwon_dw02-412h-64m
|
|
|
|
define Device/dongwon_dw02-412h-128m
|
|
$(Device/dongwon_dw02-412h)
|
|
DEVICE_VARIANT := (128M)
|
|
DEVICE_ALT0_VARIANT := (128M)
|
|
IMAGE_SIZE := 114688k
|
|
endef
|
|
TARGET_DEVICES += dongwon_dw02-412h-128m
|
|
|
|
define Device/glinet_gl-ar300m-common-nand
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR300M
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 16000k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
endef
|
|
|
|
define Device/glinet_gl-ar300m-nand
|
|
$(Device/glinet_gl-ar300m-common-nand)
|
|
DEVICE_VARIANT := NAND
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
SUPPORTED_DEVICES += glinet,gl-ar300m-nor
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m-nand
|
|
|
|
define Device/glinet_gl-ar300m-nor
|
|
$(Device/glinet_gl-ar300m-common-nand)
|
|
DEVICE_VARIANT := NOR
|
|
SUPPORTED_DEVICES += glinet,gl-ar300m-nand gl-ar300m
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m-nor
|
|
|
|
define Device/glinet_gl-ar750s-common
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR750S
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \
|
|
kmod-usb-storage block-mount
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
|
|
define Device/glinet_gl-ar750s-nor-nand
|
|
$(Device/glinet_gl-ar750s-common)
|
|
DEVICE_VARIANT := NOR/NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
SUPPORTED_DEVICES += glinet,gl-ar750s-nor
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar750s-nor-nand
|
|
|
|
define Device/glinet_gl-ar750s-nor
|
|
$(Device/glinet_gl-ar750s-common)
|
|
DEVICE_VARIANT := NOR
|
|
SUPPORTED_DEVICES += gl-ar750s glinet,gl-ar750s glinet,gl-ar750s-nor-nand
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar750s-nor
|
|
|
|
define Device/glinet_gl-e750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-E750
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \
|
|
kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
|
|
SUPPORTED_DEVICES += gl-e750
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 131072k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-e750
|
|
|
|
define Device/glinet_gl-s200-common
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-S200
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-serial-ch341
|
|
SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
|
|
endef
|
|
|
|
define Device/glinet_gl-s200-nor
|
|
$(Device/glinet_gl-s200-common)
|
|
DEVICE_VARIANT := NOR
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-s200-nor
|
|
|
|
define Device/glinet_gl-s200-nor-nand
|
|
$(Device/glinet_gl-s200-common)
|
|
DEVICE_VARIANT := NOR/NAND
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
IMAGES += factory.img
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-s200-nor-nand
|
|
|
|
define Device/glinet_gl-xe300
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-XE300
|
|
DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 \
|
|
kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 131072k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-xe300
|
|
|
|
define Device/glinet_gl-x1200-common
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-X1200
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct-htt kmod-usb2 \
|
|
kmod-usb-storage block-mount kmod-usb-net-qmi-wwan uqmi
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
|
|
define Device/glinet_gl-x1200-nor-nand
|
|
$(Device/glinet_gl-x1200-common)
|
|
DEVICE_VARIANT := NOR/NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 131072k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x1200-nor-nand
|
|
|
|
define Device/glinet_gl-x1200-nor
|
|
$(Device/glinet_gl-x1200-common)
|
|
DEVICE_VARIANT := NOR
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x1200-nor
|
|
|
|
define Device/linksys_ea4500-v3
|
|
SOC := qca9558
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Partition table has been changed. Please \
|
|
install kmod-mtd-rw and erase mtd8 (syscfg) before upgrade \
|
|
to keep configures, or forcibly flash factory image to mtd5 \
|
|
(firmware) partition with mtd tool to discard configures but \
|
|
claim additional space immediately.
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA4500
|
|
DEVICE_VARIANT := v3
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 128256k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
LINKSYS_HWNAME := EA4500V3
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
|
|
UBINIZE_OPTS := -E 5
|
|
endef
|
|
TARGET_DEVICES += linksys_ea4500-v3
|
|
|
|
define Device/meraki_mr18
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR18
|
|
DEVICE_PACKAGES := kmod-leds-uleds kmod-spi-gpio nu801
|
|
KERNEL_SIZE := 8m
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | meraki-header MR18
|
|
# Initramfs-build fails due to size issues
|
|
# KERNEL_INITRAMFS := $$(KERNEL)
|
|
KERNEL_INITRAMFS :=
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
SUPPORTED_DEVICES += mr18
|
|
endef
|
|
TARGET_DEVICES += meraki_mr18
|
|
|
|
# fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + '\0')
|
|
define Device/netgear_ath79_nand
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 25600k
|
|
KERNEL := kernel-bin | append-dtb | lzma | \
|
|
pad-offset $$(BLOCKSIZE) 129 | uImage lzma | pad-extra 1 | \
|
|
append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC)
|
|
IMAGES := sysupgrade.bin factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | check-size | netgear-dni
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
UBINIZE_OPTS := -E 5
|
|
endef
|
|
|
|
define Device/netgear_pgzng1
|
|
SOC := ar9344
|
|
DEVICE_MODEL := PGZNG1
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := Pulse Gateway
|
|
DEVICE_ALT0_VENDOR := ADT
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-i2c-gpio \
|
|
kmod-leds-pca955x kmod-rtc-isl1208 kmod-spi-dev
|
|
KERNEL_SIZE := 5120k
|
|
IMAGE_SIZE := 83968k
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += netgear_pgzng1
|
|
|
|
define Device/netgear_r6100
|
|
SOC := ar9344
|
|
DEVICE_MODEL := R6100
|
|
UIMAGE_MAGIC := 0x36303030
|
|
NETGEAR_BOARD_ID := R6100
|
|
NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2
|
|
$(Device/netgear_ath79_nand)
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r6100
|
|
|
|
define Device/netgear_wndr3700-v4
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v4
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR3700v4
|
|
NETGEAR_HW_ID := 29763948+128+128
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700-v4
|
|
|
|
define Device/netgear_wndr4300
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR4300
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR4300
|
|
NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300
|
|
|
|
define Device/netgear_wndr4300sw
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR4300SW
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR4300SW
|
|
NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300sw
|
|
|
|
define Device/netgear_wndr4300tn
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR4300TN
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR4300TN
|
|
NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300tn
|
|
|
|
define Device/netgear_wndr4300-v2
|
|
SOC := qca9563
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
|
|
first reboot issue. Please reflash factory image with nmrp or tftp.
|
|
DEVICE_MODEL := WNDR4300
|
|
DEVICE_VARIANT := v2
|
|
UIMAGE_MAGIC := 0x27051956
|
|
NETGEAR_BOARD_ID := WNDR4500series
|
|
NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012175
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300-v2
|
|
|
|
define Device/netgear_wndr4500-v3
|
|
SOC := qca9563
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
|
|
first reboot issue. Please reflash factory image with nmrp or tftp.
|
|
DEVICE_MODEL := WNDR4500
|
|
DEVICE_VARIANT := v3
|
|
UIMAGE_MAGIC := 0x27051956
|
|
NETGEAR_BOARD_ID := WNDR4500series
|
|
NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4500-v3
|
|
|
|
define Device/zte_mf28x_common
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ZTE
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/zte_mf281
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF281
|
|
KERNEL_SIZE := 6144k
|
|
IMAGE_SIZE := 29696k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis \
|
|
kmod-usb-acm comgt-ncm
|
|
endef
|
|
TARGET_DEVICES += zte_mf281
|
|
|
|
define Device/zte_mf282
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF282
|
|
DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
|
|
kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += zte_mf282
|
|
|
|
define Device/zte_mf286
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF286
|
|
DEVICE_PACKAGES += ath10k-firmware-qca988x-ct ath10k-firmware-qca9888-ct \
|
|
kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += zte_mf286
|
|
|
|
define Device/zte_mf286a
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF286A
|
|
DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
|
|
kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += zte_mf286a
|
|
|
|
define Device/zte_mf286r
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF286R
|
|
DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm \
|
|
comgt-ncm
|
|
endef
|
|
TARGET_DEVICES += zte_mf286r
|
|
|
|
define Device/zyxel_nbg6716
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := NBG6716
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \
|
|
ath10k-firmware-qca988x-ct
|
|
RAS_BOARD := NBG6716
|
|
RAS_ROOTFS_SIZE := 29696k
|
|
RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none | \
|
|
zyxel-buildkerneljffs | check-size 4096k
|
|
IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
|
|
IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | \
|
|
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | \
|
|
pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
zyxel-factory
|
|
UBINIZE_OPTS := -E 5
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6716
|
|
|
|
define Device/zyxel_emg2926_q10a
|
|
$(Device/zyxel_nbg6716)
|
|
DEVICE_MODEL := EMG2926-Q10A
|
|
RAS_BOARD := AAVK-EMG2926Q10A
|
|
endef
|
|
TARGET_DEVICES += zyxel_emg2926_q10a
|