0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 14:06:15 +00:00
openwrt/target/linux/ath79/dts/qca9531_comfast_cf-wr752ac-v1.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

155 lines
2.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-wr752ac-v1", "qca,qca9531";
model = "COMFAST CF-WR752AC v1";
aliases {
serial0 = &uart;
led-boot = &led_lan;
led-failsafe = &led_lan;
led-upgrade = &led_lan;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &pinmux_led_rssihigh &pinmux_led_rssilow>;
led_lan: lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
rssihigh {
label = "green:rssihigh";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
rssilow {
label = "red:rssilow";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&pinmux {
pinmux_led_rssihigh: pinmux_led_rssihigh {
pinctrl-single,bits = <0xc 0x0 0xff000000>;
};
pinmux_led_rssilow: pinmux_led_rssilow {
pinctrl-single,bits = <0x8 0x0 0xff000000>;
};
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&precal_art_5000>, <&macaddr_art_0 2>;
nvmem-cell-names = "pre-calibration", "mac-address";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
art: partition@10000 {
label = "art";
reg = <0x010000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
precal_art_5000: pre-calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
};
partition@20000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x020000 0xfd0000>;
};
partition@ff0000 {
label = "nvram";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_art_0 0>;
nvmem-cell-names = "mac-address";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_art_0 10>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};