0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 14:06:15 +00:00
openwrt/target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

246 lines
3.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "aerohive,hiveap-121", "qca,ar9344";
model = "Aerohive HiveAP 121";
aliases {
led-boot = &led_power_white;
led-failsafe = &led_power_orange;
led-running = &led_power_white;
led-upgrade = &led_power_orange;
label-mac-device = &eth0;
};
chosen {
bootargs = "console=ttyS0,9600";
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_power_orange: power_orange {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_white: power_white {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
i2c {
compatible = "i2c-gpio";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH /* sda */
&gpio 12 GPIO_ACTIVE_HIGH /* scl */
>;
#address-cells = <1>;
#size-cells = <0>;
tpm@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
gpio_ext_lna0 {
gpio-hog;
gpios = <20 0>;
output-low;
line-name = "hiveap-121:ext:lna0";
};
gpio_ext_lna1 {
gpio-hog;
gpios = <19 0>;
output-low;
line-name = "hiveap-121:ext:lna1";
};
gpio_usb_power {
gpio-hog;
gpios = <15 0>;
output-high;
line-name = "hiveap-121:power:usb";
};
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&macaddr_hw_info_0 2>;
nvmem-cell-names = "mac-address";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x10000>;
read-only;
};
hw_info: partition@90000 {
label = "hw-info";
reg = <0x90000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_hw_info_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@a0000 {
label = "boot-info";
reg = <0xa0000 0x10000>;
read-only;
};
partition@b0000 {
label = "boot-sinfo";
reg = <0xb0000 0x10000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_hw_info_0 1>;
nvmem-cell-names = "mac-address";
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot1";
reg = <0x0 0x400000>;
read-only;
};
partition@400000 {
label = "u-boot-env1";
reg = <0x400000 0x400000>;
read-only;
};
partition@800000 {
label = "kernel";
reg = <0x800000 0x500000>;
};
partition@d00000 {
label = "ubi";
reg = <0xd00000 0x6f00000>;
};
partition@2e00000 {
label = "wifi-info";
reg = <0x7c00000 0x400000>;
read-only;
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
pll-data = <0x06000000 0x00000101 0x00001313>;
nvmem-cells = <&macaddr_hw_info_0 0>;
nvmem-cell-names = "mac-address";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxd-delay = <1>;
rxdv-delay = <1>;
};
};