0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-27 23:34:30 +00:00
openwrt/target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

183 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
#include "ar9132.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr941-v2", "qca,ar9132";
model = "TP-Link TL-WR941N/ND v2/v3";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
qss {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
qss_r {
label = "red:qss";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
qss_g {
label = "green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
wlan {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&mdio0 {
status = "okay";
switch@0 {
compatible = "marvell,mv88e6060";
reg = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "wan";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@5 {
reg = <5>;
ethernet = <&eth0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x20000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_uboot_1fc00: macaddr@1fc00 {
reg = <0x1fc00 0x6>;
};
};
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
partition@3f0000 {
label = "art";
reg = <0x3f0000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
};
};
};
};
};
&eth0 {
status = "okay";
phy-mode = "rmii";
nvmem-cells = <&macaddr_uboot_1fc00>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <100>;
full-duplex;
};
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_uboot_1fc00>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};