0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 14:06:15 +00:00
openwrt/target/linux/ath79/dts/ar7242_meraki_mr12.dts
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

174 lines
2.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7242.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "meraki,mr12", "qca,ar7242";
model = "Meraki MR12";
aliases {
led-boot = &led_power_orange;
led-failsafe = &led_power_orange;
led-running = &led_power_green;
led-upgrade = &led_power_orange;
};
leds {
compatible = "gpio-leds";
link1 {
label = "green:link1";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
link2 {
label = "green:link2";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
link3 {
label = "green:link3";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
link4 {
label = "green:link4";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led_power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "pci168c,002a";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
nvmem-cells = <&macaddr_config_66 1>;
nvmem-cell-names = "mac-address";
};
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&eth0 {
status = "okay";
nvmem-cells = <&macaddr_config_66 0>;
nvmem-cell-names = "mac-address";
pll-data = <0x02000000 0x00000101 0x00001313>;
phy-mode = "rgmii-id";
phy-handle = <&phy4>;
};
&mdio1 {
status = "okay";
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_config_66 0>;
nvmem-cell-names = "mac-address";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x40000>;
read-only;
};
config: partition@80000 {
label = "config";
reg = <0x80000 0x20000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_config_66: macaddr@66 {
compatible = "mac-base";
reg = <0x66 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@a0000 {
label = "firmware";
reg = <0xa0000 0xf40000>;
compatible = "denx,uimage";
};
partition@fe0000 {
label = "art";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};