0
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-24 14:06:15 +00:00
openwrt/target/linux/ath79/dts/ar7161_netgear_wndap360.dts
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

170 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7100.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "netgear,wndap360", "qca,ar7161";
model = "Netgear WNDAP360";
aliases {
led-boot = &led_power_orange;
led-failsafe = &led_power_orange;
led-running = &led_power_orange;
led-upgrade = &led_power_orange;
};
leds {
compatible = "gpio-leds";
led_power_orange: power_orange {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wifi_2g_green {
label = "green:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi_5g_green {
label = "green:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
};
&mdio0 {
status = "okay";
phy1: ethernet-phy@1 {
reg = <0x1>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy1>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x010000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "nvram";
reg = <0x7e0000 0x010000>;
read-only;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_120c: macaddr@120c {
reg = <0x120c 0x6>;
};
macaddr_art_520c: macaddr@520c {
compatible = "mac-base";
reg = <0x520c 0x6>;
#nvmem-cell-cells = <1>;
};
calibration_art_1000: calibration@1000 {
reg = <0x1000 0xeb8>;
};
calibration_art_5000: calibration@5000 {
reg = <0x5000 0xeb8>;
};
};
};
};
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@11,0 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0>;
nvmem-cells = <&macaddr_art_120c>, <&calibration_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@12,0 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0>;
nvmem-cells = <&macaddr_art_520c 1>, <&calibration_art_5000>;
nvmem-cell-names = "mac-address", "calibration";
#gpio-cells = <2>;
gpio-controller;
};
};