mirror of
https://git.code.sf.net/p/openocd/code
synced 2024-11-22 16:36:25 +00:00
a126229dff
Replace the GPLv2-or-later boilerplate with the SPDX tag. The SPDX tag on files *.c is incorrect, as it should use the C99 single line comment using '//'. But current checkpatch doesn't allow C99 comments, so keep using standard C comments, by now. Change-Id: I380d552940f1c405309a3346454251c0e80b5a45 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7159 Tested-by: jenkins
209 lines
8.0 KiB
ArmAsm
209 lines
8.0 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
|
|
/***************************************************************************
|
|
* Copyright (C) 2018 by Andreas Bolsch *
|
|
* andreas.bolsch@mni.thm.de *
|
|
***************************************************************************/
|
|
|
|
.text
|
|
.syntax unified
|
|
.cpu cortex-m0
|
|
.thumb
|
|
.thumb_func
|
|
|
|
/* Params:
|
|
* r0 - total count (bytes), remaining bytes (out, 0 means successful)
|
|
* r1 - flash page size
|
|
* r2 - address offset into flash
|
|
* r3 - OCTOSPI io_base
|
|
* r8 - fifo start
|
|
* r9 - fifo end + 1
|
|
|
|
* Clobbered:
|
|
* r4 - rp
|
|
* r5 - address of OCTOSPI_DR
|
|
* r6 - address of OCTOSPI_CCR
|
|
* r7 - tmp
|
|
* r10 - single 0x0 / dual 0x1
|
|
*/
|
|
|
|
#include "../../../../src/flash/nor/stmqspi.h"
|
|
|
|
#define OCTOSPI_CCR_CCR (OCTOSPI_CCR - OCTOSPI_CCR)
|
|
#define OCTOSPI_TCR_CCR (OCTOSPI_TCR - OCTOSPI_CCR)
|
|
#define OCTOSPI_IR_CCR (OCTOSPI_IR - OCTOSPI_CCR)
|
|
|
|
.macro octospi_abort
|
|
movs r5, #(1<<SPI_ABORT) /* abort bit mask */
|
|
ldr r7, [r3, #OCTOSPI_CR] /* get OCTOSPI CR register */
|
|
orrs r7, r7, r5 /* set abort bit */
|
|
str r7, [r3, #OCTOSPI_CR] /* store new CR register */
|
|
.endm
|
|
|
|
.macro wait_busy
|
|
0:
|
|
ldr r7, [r3, #OCTOSPI_SR] /* load status */
|
|
lsrs r7, r7, #(SPI_BUSY+1) /* shift BUSY into C */
|
|
bcs 0b /* loop until BUSY cleared */
|
|
movs r7, #(1<<SPI_TCF) /* TCF bitmask */
|
|
str r7, [r3, #OCTOSPI_FCR] /* clear TCF flag */
|
|
.endm
|
|
|
|
start:
|
|
subs r0, r0, #1 /* decrement count for DLR */
|
|
subs r1, r1, #1 /* page size mask and for DLR */
|
|
ldr r4, rp /* load rp */
|
|
ldr r7, [r3, #OCTOSPI_CR] /* get OCTOSPI_CR register */
|
|
lsls r7, r7, #(31-SPI_DUAL_FLASH) /* clear higher order bits */
|
|
lsrs r7, r7, #31 /* DUAL_FLASH bit into bit 0 */
|
|
mov r10, r7 /* save in r10 */
|
|
wip_loop:
|
|
octospi_abort /* start in clean state */
|
|
movs r5, #OCTOSPI_DR /* load OCTOSPI_DR address offset */
|
|
adds r5, r5, r3 /* address of OCTOSPI_DR */
|
|
movs r6, #OCTOSPI_CCR-OCTOSPI_DR /* load OCTOSPI_CCR address offset */
|
|
adds r6, r6, r5 /* address of OCTOSPI_CCR */
|
|
wait_busy
|
|
ldr r7, cr_read_status /* indirect read mode */
|
|
str r7, [r3, #OCTOSPI_CR] /* set mode */
|
|
mov r7, r10 /* get dual bit */
|
|
str r7, [r3, #OCTOSPI_DLR] /* one or two (for dual) bytes */
|
|
ldr r7, ccr_read_status /* CCR for status read */
|
|
str r7, [r6, #OCTOSPI_CCR_CCR] /* initiate status read */
|
|
ldr r7, tcr_read_status /* TCR for status read */
|
|
str r7, [r6, #OCTOSPI_TCR_CCR] /* instruction */
|
|
ldr r7, ir_read_status /* IR for status read */
|
|
str r7, [r6, #OCTOSPI_IR_CCR] /* instruction */
|
|
movs r7, #0 /* dummy address */
|
|
str r7, [r3, #OCTOSPI_AR] /* into AR (for 8-line mode) */
|
|
ldrb r7, [r5] /* get first status register */
|
|
lsrs r7, r7, #(SPIFLASH_BSY+1) /* if first flash busy, */
|
|
bcs wip_loop /* then poll again */
|
|
mov r7, r10 /* get dual bit */
|
|
tst r7, r7 /* dual mode ? */
|
|
beq write_enable /* not dual, then ok */
|
|
ldrb r7, [r5] /* get second status register */
|
|
lsrs r7, r7, #(SPIFLASH_BSY+1) /* if second flash busy, */
|
|
bcs wip_loop /* then poll again */
|
|
write_enable:
|
|
tst r0, r0 /* test residual count */
|
|
bmi exit /* if negative, then finished */
|
|
wait_busy
|
|
ldr r7, cr_write_enable /* indirect write mode */
|
|
str r7, [r3, #OCTOSPI_CR] /* set mode */
|
|
ldr r7, ccr_write_enable /* CCR for write enable */
|
|
str r7, [r6, #OCTOSPI_CCR_CCR] /* initiate write enable */
|
|
ldr r7, tcr_write_enable /* TCR for write enable */
|
|
str r7, [r6, #OCTOSPI_TCR_CCR] /* write enable instruction */
|
|
ldr r7, ir_write_enable /* IR for write enable */
|
|
str r7, [r6, #OCTOSPI_IR_CCR] /* instruction */
|
|
movs r7, #0 /* silicon bug in L5? dummy write */
|
|
str r7, [r3, #OCTOSPI_AR] /* into AR resolves issue */
|
|
wait_busy
|
|
ldr r7, cr_read_status /* indirect read mode */
|
|
str r7, [r3, #OCTOSPI_CR] /* set mode */
|
|
mov r7, r10 /* get dual count */
|
|
str r7, [r3, #OCTOSPI_DLR] /* one or two (for dual) bytes */
|
|
ldr r7, ccr_read_status /* CCR for status read */
|
|
str r7, [r6, #OCTOSPI_CCR_CCR] /* initiate status read */
|
|
ldr r7, tcr_read_status /* TCR for status read */
|
|
str r7, [r6, #OCTOSPI_TCR_CCR] /* instruction */
|
|
ldr r7, ir_read_status /* IR for status read */
|
|
str r7, [r6, #OCTOSPI_IR_CCR] /* instruction */
|
|
movs r7, #0 /* dummy address */
|
|
str r7, [r3, #OCTOSPI_AR] /* into AR (for 8-line mode) */
|
|
ldrb r7, [r5] /* get first status register */
|
|
lsrs r7, r7, #(SPIFLASH_WE+1) /* if first flash not */
|
|
bcc error /* write enabled, then error */
|
|
mov r7, r10 /* get dual bit */
|
|
tst r7, r7 /* dual mode ? */
|
|
beq start_write /* not dual, then ok */
|
|
ldrb r7, [r5] /* get second status register */
|
|
lsrs r7, r7, #(SPIFLASH_WE+1) /* if second flash not */
|
|
bcc error /* write enabled, then error */
|
|
start_write:
|
|
wait_busy
|
|
ldr r7, cr_page_write /* indirect write mode */
|
|
str r7, [r3, #OCTOSPI_CR] /* set mode */
|
|
mov r7, r2 /* get current start address */
|
|
orrs r7, r7, r1 /* end of current page */
|
|
subs r7, r7, r2 /* count-1 to end of page */
|
|
cmp r7, r0 /* if this count <= remaining */
|
|
bls write_dlr /* then write to end of page */
|
|
mov r7, r0 /* else write all remaining */
|
|
write_dlr:
|
|
str r7, [r3, #OCTOSPI_DLR] /* size-1 in DLR register */
|
|
ldr r7, ccr_page_write /* CCR for page write */
|
|
str r7, [r6, #OCTOSPI_CCR_CCR] /* initiate transfer */
|
|
ldr r7, tcr_page_write /* TCR for page write */
|
|
str r7, [r6, #OCTOSPI_TCR_CCR] /* instruction */
|
|
ldr r7, ir_page_write /* IR for page write */
|
|
str r7, [r6, #OCTOSPI_IR_CCR] /* instruction */
|
|
str r2, [r3, #OCTOSPI_AR] /* store SPI start address */
|
|
write_loop:
|
|
ldr r7, wp /* get wp */
|
|
cmp r7, #0 /* if wp equals 0 */
|
|
beq exit /* then abort */
|
|
cmp r4, r7 /* check if fifo empty */
|
|
beq write_loop /* wait until not empty */
|
|
ldrb r7, [r4, #0] /* read next byte */
|
|
strb r7, [r5] /* write next byte to DR */
|
|
adds r4, r4, #1 /* increment internal rp */
|
|
cmp r4, r9 /* internal rp beyond end? */
|
|
blo upd_write /* if no, then ok */
|
|
mov r4, r8 /* else wrap around */
|
|
upd_write:
|
|
adr r7, rp /* get address of rp */
|
|
str r4, [r7] /* store updated rp */
|
|
adds r2, r2, #1 /* increment address */
|
|
subs r0, r0, #1 /* decrement (count-1) */
|
|
bmi page_end /* stop if no data left */
|
|
tst r2, r1 /* page end ? */
|
|
bne write_loop /* if not, then next byte */
|
|
page_end:
|
|
ldr r7, [r3, #OCTOSPI_SR] /* load status */
|
|
lsrs r7, r7, #(SPI_TCF+1) /* shift TCF into C */
|
|
bcc page_end /* loop until TCF set */
|
|
bal wip_loop /* then next page */
|
|
|
|
error:
|
|
movs r0, #0 /* return 0xFFFFFFFF */
|
|
subs r0, r0, #2 /* for error */
|
|
exit:
|
|
adds r0, r0, #1 /* increment count due to the -1 */
|
|
octospi_abort /* to idle state */
|
|
.align 2 /* align to word, bkpt is 4 words */
|
|
bkpt #0 /* before code end for exit_point */
|
|
.align 2 /* align to word */
|
|
|
|
cr_read_status:
|
|
.space 4 /* OCTOSPI_CR value for READ_STATUS command */
|
|
ccr_read_status:
|
|
.space 4 /* OCTOSPI_CCR value for READ_STATUS command */
|
|
tcr_read_status:
|
|
.space 4 /* OCTOSPI_TCR value for READ_STATUS command */
|
|
ir_read_status:
|
|
.space 4 /* OCTOSPI_IR value for READ_STATUS command */
|
|
|
|
cr_write_enable:
|
|
.space 4 /* OCTOSPI_CR value for WRITE_ENABLE command */
|
|
ccr_write_enable:
|
|
.space 4 /* OCTOSPI_CCR value for WRITE_ENABLE command */
|
|
tcr_write_enable:
|
|
.space 4 /* OCTOSPI_TCR value for WRITE_ENABLE command */
|
|
ir_write_enable:
|
|
.space 4 /* OCTOSPI_IR value for WRITE_ENABLE command */
|
|
|
|
cr_page_write:
|
|
.space 4 /* OCTOSPI_CR value for PAGE_PROG command */
|
|
ccr_page_write:
|
|
.space 4 /* OCTOSPI_CCR value for PAGE_PROG command */
|
|
tcr_page_write:
|
|
.space 4 /* OCTOSPI_TCR value for PAGE_PROG command */
|
|
ir_page_write:
|
|
.space 4 /* OCTOSPI_IR value for PAGE_PROG command */
|
|
|
|
.equ wp, . /* wp, uint32_t */
|
|
.equ rp, wp + 4 /* rp, uint32_t */
|
|
.equ buffer, rp + 4 /* buffer follows right away */
|