msm8916-openwrt/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.h
Olliver Schinagl 0a931767cf realtek: Replace C++ style comments
The only exception to C++ style comments are SPDX license identifier
markers at the start of C files (even headers have C style markers).

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2022-12-27 16:33:01 +01:00

63 lines
1.7 KiB
C

#ifndef I2C_RTL9300_H
#define I2C_RTL9300_H
#include <linux/i2c.h>
#define RTL9300_I2C_CTRL1 0x00
#define RTL9300_I2C_CTRL1_MEM_ADDR 8
#define RTL9300_I2C_CTRL1_SDA_OUT_SEL 4
#define RTL9300_I2C_CTRL1_GPIO8_SCL_SEL 3
#define RTL9300_I2C_CTRL1_RWOP 2
#define RTL9300_I2C_CTRL1_I2C_FAIL 1
#define RTL9300_I2C_CTRL1_I2C_TRIG 0
#define RTL9300_I2C_CTRL2 0x04
#define RTL9300_I2C_CTRL2_DRIVE_ACK_DELAY 20
#define RTL9300_I2C_CTRL2_CHECK_ACK_DELAY 16
#define RTL9300_I2C_CTRL2_READ_MODE 15
#define RTL9300_I2C_CTRL2_DEV_ADDR 8
#define RTL9300_I2C_CTRL2_DATA_WIDTH 4
#define RTL9300_I2C_CTRL2_MADDR_WIDTH 2
#define RTL9300_I2C_CTRL2_SCL_FREQ 0
#define RTL9300_I2C_DATA_WORD0 0x08
#define RTL9300_I2C_MST_GLB_CTRL 0x18
#define RTL9310_I2C_MST_IF_CTRL 0x00
#define RTL9310_I2C_MST_IF_SEL 0x04
#define RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL 12
#define RTL9310_I2C_CTRL 0x08
#define RTL9310_I2C_CTRL_SCL_FREQ 30
#define RTL9310_I2C_CTRL_CHECK_ACK_DELAY 26
#define RTL9310_I2C_CTRL_DRIVE_ACK_DELAY 22
#define RTL9310_I2C_CTRL_SDA_OUT_SEL 18
#define RTL9310_I2C_CTRL_DEV_ADDR 11
#define RTL9310_I2C_CTRL_MADDR_WIDTH 9
#define RTL9310_I2C_CTRL_DATA_WIDTH 5
#define RTL9310_I2C_CTRL_READ_MODE 4
#define RTL9310_I2C_CTRL_RWOP 2
#define RTL9310_I2C_CTRL_I2C_FAIL 1
#define RTL9310_I2C_CTRL_I2C_TRIG 0
#define RTL9310_I2C_MEMADDR 0x0c
#define RTL9310_I2C_DATA 0x10
#define RTL9300_I2C_STD_FREQ 0
#define RTL9300_I2C_FAST_FREQ 1
struct rtl9300_i2c {
void __iomem *base;
u32 mst2_offset;
struct device *dev;
struct i2c_adapter adap;
u8 bus_freq;
u8 sda_num; /* SDA channel number */
u8 scl_num; /* SCL channel, mapping to master 1 or 2 */
};
#endif