msm8916-openwrt/target/linux/mvebu/patches-6.6/100-aardvark-workaround-PCIe.patch
Stijn Segers 4671a92de3 mvebu: 6.6: copy files, patches & configs from 6.1
Copy all mvebu 6.1 specific files, patches and configs to 6.1.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2024-04-03 17:49:53 +02:00

82 lines
3.2 KiB
Diff

Subject: [PATCH v2] PCI: aardvark: Implement workaround for PCIe Completion Timeout
Date: Tue, 2 Aug 2022 14:38:16 +0200
Message-Id: <20220802123816.21817-1-pali@kernel.org>
X-Mailer: git-send-email 2.20.1
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk
List-ID: <linux-pci.vger.kernel.org>
X-Mailing-List: linux-pci@vger.kernel.org
Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
document describes in erratum 3.12 PCIe Completion Timeout (Ref #: 251),
that PCIe IP does not support a strong-ordered model for inbound posted vs.
outbound completion.
As a workaround for this erratum, DIS_ORD_CHK flag in Debug Mux Control
register must be set. It disables the ordering check in the core between
Completions and Posted requests received from the link.
Marvell also suggests to do full memory barrier at the beginning of
aardvark summary interrupt handler before calling interrupt handlers of
endpoint drivers in order to minimize the risk for the race condition
documented in the Erratum between the DMA done status reading and the
completion of writing to the host memory.
More details about this issue and suggested workarounds are in discussion:
https://lore.kernel.org/linux-pci/BN9PR18MB425154FE5019DCAF2028A1D5DB8D9@BN9PR18MB4251.namprd18.prod.outlook.com/t/#u
It was reported that enabling this workaround fixes instability issues and
"Unhandled fault" errors when using 60 GHz WiFi 802.11ad card with Qualcomm
QCA6335 chip under significant load which were caused by interrupt status
stuck in the outbound CMPLT queue traced back to this erratum.
This workaround fixes also kernel panic triggered after some minutes of
usage 5 GHz WiFi 802.11ax card with Mediatek MT7915 chip:
Internal error: synchronous external abort: 96000210 [#1] SMP
Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: stable@vger.kernel.org
---
drivers/pci/controller/pci-aardvark.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -212,6 +212,8 @@ enum {
};
#define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
+#define DEBUG_MUX_CTRL_REG (LMI_BASE_ADDR + 0x208)
+#define DIS_ORD_CHK BIT(30)
/* PCIe core controller registers */
#define CTRL_CORE_BASE_ADDR 0x18000
@@ -560,6 +562,11 @@ static void advk_pcie_setup_hw(struct ad
PCIE_CORE_CTRL2_TD_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+ /* Disable ordering checks, workaround for erratum 3.12 "PCIe completion timeout" */
+ reg = advk_readl(pcie, DEBUG_MUX_CTRL_REG);
+ reg |= DIS_ORD_CHK;
+ advk_writel(pcie, reg, DEBUG_MUX_CTRL_REG);
+
/* Set lane X1 */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LANE_CNT_MSK;
@@ -1661,6 +1668,9 @@ static irqreturn_t advk_pcie_irq_handler
struct advk_pcie *pcie = arg;
u32 status;
+ /* Full memory barrier (ARM dsb sy), workaround for erratum 3.12 "PCIe completion timeout" */
+ mb();
+
status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
if (!(status & PCIE_IRQ_CORE_INT))
return IRQ_NONE;