Roland Reinl 44cd32d764 mediatek: Add support for TP-Link EAP225v5 ... Device specification: - MT7629 with 16MB NOR flash W25Q128 and 128 MB DDR3 RAM. - MT7761N and MT7762N wireless chips (currenlty no driver in OpenWrt available) - WiFi is NOT working on this device - Dual core but second CPU doesn't seem to work (Error message during boot: "CPU1: failed to come online") There are two similar merge requests for similar devices with the same issues: - https://github.com/openwrt/openwrt/pull/12286 - https://github.com/openwrt/openwrt/pull/5084 UART interface is next to the reset button, pinout: - 1: TX (the pin with the arrow marker) - 2: RX - 3: GND - 4: VCC UART settings: 115200,8n1, 3.3V U-Boot menu can be entered by pressing Ctrl+B during startup. Booting initramfs: - Set your computers IP adress to 192.168.1.110 - Run a TFTP server providing the initramfs image - Power on the AP, press Ctrl+B to get to the U-Boot menu - Select "1. System Load Linux to SDRAM via TFTP" - Update kernel file name, input server IP and input device IP (if they deviate from the defaults) - After booting, create a backup of all partitions, especially for kernel and root_fs. They are required for reverting back to stock firmware - The sysupgrade image can be flashed now MAC adresses: - LAN and 2.4GHz use the same MAC (the one printed on the device) - 5GHz WiFi MAC is LAN MAC + 1 GPIOs: - GPIO 21 is the reset pin (low active) - GPIO 55 is for the green LED (active high) - GPIO 56 is for the yellow/amber LED (active high) Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>		2023-11-12 17:39:52 +01:00
..
01_leds	mediatek: add support for Netgear EX6250v2 series	2023-07-01 14:42:11 +02:00
02_network	mediatek: Add support for TP-Link EAP225v5	2023-11-12 17:39:52 +01:00