msm8916-openwrt/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch
Pawel Dembicki 70dd237ebd kirkwood: refresh 6.6 patches
Removed upstream merged:
002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch
005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch

Manually refreshed:
100-ib62x0.patch
101-iconnect.patch
102-dockstar.patch
103-iomega-ix2-200.patch
105-linksys-viper-dts.patch
106-goflexnet.patch
107-01-zyxel-nsa3x0-common-nand-partitions.patch
107-03-nsa325.patch
109-pogoplug_v4.patch
110-pogo_e02.patch
111-l-50.patch
112-sheevaplug.patch
113-readynas_duo_v2.patch
114-ctera-c-200-v1.patch
115-nsa310s.patch
116-4i-edge-200.patch
117-netgear_stora.patch
203-blackarmor-nas220.patch

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-04-04 18:31:21 +02:00

69 lines
1.4 KiB
Diff

--- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
@@ -20,6 +20,13 @@
compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
"marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -33,12 +40,12 @@
gpio-leds {
compatible = "gpio-leds";
- health {
+ led_health: health {
label = "pogo_e02:green:health";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
- fault {
+ led_fault: fault {
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
@@ -95,24 +102,24 @@
status = "okay";
partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
+ label = "uboot";
+ reg = <0x0 0xe0000>;
read-only;
};
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
+ partition@e0000 {
+ label = "uboot_env";
+ reg = <0xe0000 0x20000>;
};
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
+ partition@100000 {
+ label = "second_stage_uboot";
+ reg = <0x100000 0x100000>;
};
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0x5b00000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0x7e00000>;
};
};