msm8916-openwrt/target/linux/generic/pending-6.1/450-12-dt-bindings-mmc-mmc-card-add-block-device-nodes.patch
Daniel Golle fc153aa8d9 kernel: import pending patches adding support for NVMEM on UBI and MMC
Similar to supporting nvmem-layouts on MTD devices, also allow referencing
UBI and MMC devices in DT.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-02-15 19:06:36 +00:00

75 lines
2.3 KiB
Diff

From 86864bf8f40e84dc881c197ef470a88668329dbf Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Mon, 7 Aug 2023 21:21:45 +0100
Subject: [PATCH 12/15] dt-bindings: mmc: mmc-card: add block device nodes
Add nodes representing the block devices exposed by an MMC device
including an example involving nvmem-cells.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
.../devicetree/bindings/mmc/mmc-card.yaml | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
--- a/Documentation/devicetree/bindings/mmc/mmc-card.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
@@ -26,6 +26,18 @@ properties:
Use this to indicate that the mmc-card has a broken hpi
implementation, and that hpi should not be used.
+ block:
+ $ref: /schemas/block/block-device.yaml#
+ description:
+ Represents the block storage provided by an SD card or the
+ main hardware partition of an eMMC.
+
+patternProperties:
+ '^boot[0-9]+':
+ $ref: /schemas/block/block-device.yaml#
+ description:
+ Represents a boot hardware partition on an eMMC.
+
required:
- compatible
- reg
@@ -42,6 +54,39 @@ examples:
compatible = "mmc-card";
reg = <0>;
broken-hpi;
+
+ block {
+ partitions {
+ cal_data: block-partition-rf {
+ partnum = <3>;
+ partname = "rf";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom@0 {
+ reg = <0x0 0x1000>;
+ };
+ };
+ };
+ };
+ };
+
+ boot1 {
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr: macaddr@a {
+ compatible = "mac-base";
+ reg = <0xa 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
};
};