Openwrt/msm8916-openwrt
1
0
Fork 0
forked from Openwrt/openwrt
Code Issues 1 Pull Requests Actions Activity
msm8916
msm8916-openwrt/target/linux/bcm27xx/patches-6.6/950-0534-clk-rp1-Add-sdio-clk-driver.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches 
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

642 lines
21 KiB
Diff
Raw Permalink Blame History

From 727ee323c983adf21aba1fd32e7ac817ca7d5fb9 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 12 Oct 2022 14:20:07 +0100
Subject: [PATCH 0534/1085] clk: rp1: Add sdio-clk driver
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-rp1-sdio.c | 600 +++++++++++++++++++++++++++++++++++++
3 files changed, 607 insertions(+)
create mode 100644 drivers/clk/clk-rp1-sdio.c
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -95,6 +95,12 @@ config COMMON_CLK_RP1
help
Enable common clock framework support for Raspberry Pi RP1
+config COMMON_CLK_RP1_SDIO
+ tristate "Clock driver for the RP1 SDIO interfaces"
+ depends on MFD_RP1
+ help
+ SDIO clock driver for the RP1 support chip
+
config COMMON_CLK_HI655X
tristate "Clock driver for Hi655x" if EXPERT
depends on (MFD_HI655X_PMIC || COMPILE_TEST)
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
obj-$(CONFIG_COMMON_CLK_RP1) += clk-rp1.o
+obj-$(CONFIG_COMMON_CLK_RP1_SDIO) += clk-rp1-sdio.o
obj-$(CONFIG_COMMON_CLK_HI655X) += clk-hi655x.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
obj-$(CONFIG_COMMON_CLK_SCMI) += clk-scmi.o
--- /dev/null
+++ b/drivers/clk/clk-rp1-sdio.c
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SDIO clock driver for RP1
+ *
+ * Copyright (C) 2023 Raspberry Pi Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+// Register : MODE
+#define MODE 0x00000000
+#define MODE_BITS 0x70030000
+#define MODE_RESET 0x00000000
+// Field : MODE_STEPS_PER_CYCLE
+#define MODE_STEPS_PER_CYCLE_RESET 0x0
+#define MODE_STEPS_PER_CYCLE_BITS 0x70000000
+#define MODE_STEPS_PER_CYCLE_MSB 30
+#define MODE_STEPS_PER_CYCLE_LSB 28
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_20 0x0
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_10 0x1
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_16 0x2
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_8 0x3
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_12 0x4
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_6 0x5
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_5 0x6
+#define MODE_STEPS_PER_CYCLE_VALUE_STEPS_4 0x7
+// Field : MODE_SRC_SEL
+#define MODE_SRC_SEL_RESET 0x0
+#define MODE_SRC_SEL_BITS 0x00030000
+#define MODE_SRC_SEL_MSB 17
+#define MODE_SRC_SEL_LSB 16
+#define MODE_SRC_SEL_VALUE_STOP 0x0
+#define MODE_SRC_SEL_VALUE_CLK_ALT_SRC 0x1
+#define MODE_SRC_SEL_VALUE_PLL_SYS_VCO 0x2
+#define MODE_SRC_SEL_VALUE_PLL_SYS_VCO_AGAIN 0x3
+// Register : FROMIP
+#define FROMIP 0x00000004
+#define FROMIP_BITS 0x0f9713ff
+#define FROMIP_RESET 0x00000000
+// Field : FROMIP_TUNING_CCLK_SEL
+#define FROMIP_TUNING_CCLK_SEL_RESET 0x0
+#define FROMIP_TUNING_CCLK_SEL_BITS 0x0f000000
+#define FROMIP_TUNING_CCLK_SEL_MSB 27
+#define FROMIP_TUNING_CCLK_SEL_LSB 24
+// Field : FROMIP_TUNING_CCLK_UPDATE
+#define FROMIP_TUNING_CCLK_UPDATE_RESET 0x0
+#define FROMIP_TUNING_CCLK_UPDATE_BITS 0x00800000
+#define FROMIP_TUNING_CCLK_UPDATE_MSB 23
+#define FROMIP_TUNING_CCLK_UPDATE_LSB 23
+// Field : FROMIP_SAMPLE_CCLK_SEL
+#define FROMIP_SAMPLE_CCLK_SEL_RESET 0x0
+#define FROMIP_SAMPLE_CCLK_SEL_BITS 0x00100000
+#define FROMIP_SAMPLE_CCLK_SEL_MSB 20
+#define FROMIP_SAMPLE_CCLK_SEL_LSB 20
+// Field : FROMIP_CLK2CARD_ON
+#define FROMIP_CLK2CARD_ON_RESET 0x0
+#define FROMIP_CLK2CARD_ON_BITS 0x00040000
+#define FROMIP_CLK2CARD_ON_MSB 18
+#define FROMIP_CLK2CARD_ON_LSB 18
+// Field : FROMIP_CARD_CLK_STABLE
+#define FROMIP_CARD_CLK_STABLE_RESET 0x0
+#define FROMIP_CARD_CLK_STABLE_BITS 0x00020000
+#define FROMIP_CARD_CLK_STABLE_MSB 17
+#define FROMIP_CARD_CLK_STABLE_LSB 17
+// Field : FROMIP_CARD_CLK_EN
+#define FROMIP_CARD_CLK_EN_RESET 0x0
+#define FROMIP_CARD_CLK_EN_BITS 0x00010000
+#define FROMIP_CARD_CLK_EN_MSB 16
+#define FROMIP_CARD_CLK_EN_LSB 16
+// Field : FROMIP_CLK_GEN_SEL
+#define FROMIP_CLK_GEN_SEL_RESET 0x0
+#define FROMIP_CLK_GEN_SEL_BITS 0x00001000
+#define FROMIP_CLK_GEN_SEL_MSB 12
+#define FROMIP_CLK_GEN_SEL_LSB 12
+// Field : FROMIP_FREQ_SEL
+#define FROMIP_FREQ_SEL_RESET 0x000
+#define FROMIP_FREQ_SEL_BITS 0x000003ff
+#define FROMIP_FREQ_SEL_MSB 9
+#define FROMIP_FREQ_SEL_LSB 0
+// Register : LOCAL
+#define LOCAL 0x00000008
+#define LOCAL_BITS 0x1f9713ff
+#define LOCAL_RESET 0x00000000
+// Field : LOCAL_TUNING_CCLK_SEL
+#define LOCAL_TUNING_CCLK_SEL_RESET 0x00
+#define LOCAL_TUNING_CCLK_SEL_BITS 0x1f000000
+#define LOCAL_TUNING_CCLK_SEL_MSB 28
+#define LOCAL_TUNING_CCLK_SEL_LSB 24
+// Field : LOCAL_TUNING_CCLK_UPDATE
+#define LOCAL_TUNING_CCLK_UPDATE_RESET 0x0
+#define LOCAL_TUNING_CCLK_UPDATE_BITS 0x00800000
+#define LOCAL_TUNING_CCLK_UPDATE_MSB 23
+#define LOCAL_TUNING_CCLK_UPDATE_LSB 23
+// Field : LOCAL_SAMPLE_CCLK_SEL
+#define LOCAL_SAMPLE_CCLK_SEL_RESET 0x0
+#define LOCAL_SAMPLE_CCLK_SEL_BITS 0x00100000
+#define LOCAL_SAMPLE_CCLK_SEL_MSB 20
+#define LOCAL_SAMPLE_CCLK_SEL_LSB 20
+// Field : LOCAL_CLK2CARD_ON
+#define LOCAL_CLK2CARD_ON_RESET 0x0
+#define LOCAL_CLK2CARD_ON_BITS 0x00040000
+#define LOCAL_CLK2CARD_ON_MSB 18
+#define LOCAL_CLK2CARD_ON_LSB 18
+// Field : LOCAL_CARD_CLK_STABLE
+#define LOCAL_CARD_CLK_STABLE_RESET 0x0
+#define LOCAL_CARD_CLK_STABLE_BITS 0x00020000
+#define LOCAL_CARD_CLK_STABLE_MSB 17
+#define LOCAL_CARD_CLK_STABLE_LSB 17
+// Field : LOCAL_CARD_CLK_EN
+#define LOCAL_CARD_CLK_EN_RESET 0x0
+#define LOCAL_CARD_CLK_EN_BITS 0x00010000
+#define LOCAL_CARD_CLK_EN_MSB 16
+#define LOCAL_CARD_CLK_EN_LSB 16
+// Field : LOCAL_CLK_GEN_SEL
+#define LOCAL_CLK_GEN_SEL_RESET 0x0
+#define LOCAL_CLK_GEN_SEL_BITS 0x00001000
+#define LOCAL_CLK_GEN_SEL_MSB 12
+#define LOCAL_CLK_GEN_SEL_LSB 12
+#define LOCAL_CLK_GEN_SEL_VALUE_PROGCLOCKMODE 0x0
+#define LOCAL_CLK_GEN_SEL_VALUE_DIVCLOCKMODE 0x1
+// Field : LOCAL_FREQ_SEL
+#define LOCAL_FREQ_SEL_RESET 0x000
+#define LOCAL_FREQ_SEL_BITS 0x000003ff
+#define LOCAL_FREQ_SEL_MSB 9
+#define LOCAL_FREQ_SEL_LSB 0
+// Register : USE_LOCAL
+#define USE_LOCAL 0x0000000c
+#define USE_LOCAL_BITS 0x01951001
+#define USE_LOCAL_RESET 0x00000000
+// Field : USE_LOCAL_TUNING_CCLK_SEL
+#define USE_LOCAL_TUNING_CCLK_SEL_RESET 0x0
+#define USE_LOCAL_TUNING_CCLK_SEL_BITS 0x01000000
+#define USE_LOCAL_TUNING_CCLK_SEL_MSB 24
+#define USE_LOCAL_TUNING_CCLK_SEL_LSB 24
+// Field : USE_LOCAL_TUNING_CCLK_UPDATE
+#define USE_LOCAL_TUNING_CCLK_UPDATE_RESET 0x0
+#define USE_LOCAL_TUNING_CCLK_UPDATE_BITS 0x00800000
+#define USE_LOCAL_TUNING_CCLK_UPDATE_MSB 23
+#define USE_LOCAL_TUNING_CCLK_UPDATE_LSB 23
+// Field : USE_LOCAL_SAMPLE_CCLK_SEL
+#define USE_LOCAL_SAMPLE_CCLK_SEL_RESET 0x0
+#define USE_LOCAL_SAMPLE_CCLK_SEL_BITS 0x00100000
+#define USE_LOCAL_SAMPLE_CCLK_SEL_MSB 20
+#define USE_LOCAL_SAMPLE_CCLK_SEL_LSB 20
+// Field : USE_LOCAL_CLK2CARD_ON
+#define USE_LOCAL_CLK2CARD_ON_RESET 0x0
+#define USE_LOCAL_CLK2CARD_ON_BITS 0x00040000
+#define USE_LOCAL_CLK2CARD_ON_MSB 18
+#define USE_LOCAL_CLK2CARD_ON_LSB 18
+// Field : USE_LOCAL_CARD_CLK_EN
+#define USE_LOCAL_CARD_CLK_EN_RESET 0x0
+#define USE_LOCAL_CARD_CLK_EN_BITS 0x00010000
+#define USE_LOCAL_CARD_CLK_EN_MSB 16
+#define USE_LOCAL_CARD_CLK_EN_LSB 16
+// Field : USE_LOCAL_CLK_GEN_SEL
+#define USE_LOCAL_CLK_GEN_SEL_RESET 0x0
+#define USE_LOCAL_CLK_GEN_SEL_BITS 0x00001000
+#define USE_LOCAL_CLK_GEN_SEL_MSB 12
+#define USE_LOCAL_CLK_GEN_SEL_LSB 12
+// Field : USE_LOCAL_FREQ_SEL
+#define USE_LOCAL_FREQ_SEL_RESET 0x0
+#define USE_LOCAL_FREQ_SEL_BITS 0x00000001
+#define USE_LOCAL_FREQ_SEL_MSB 0
+#define USE_LOCAL_FREQ_SEL_LSB 0
+// Register : SD_DELAY
+#define SD_DELAY 0x00000010
+#define SD_DELAY_BITS 0x0000001f
+#define SD_DELAY_RESET 0x00000000
+// Field : SD_DELAY_STEPS
+#define SD_DELAY_STEPS_RESET 0x00
+#define SD_DELAY_STEPS_BITS 0x0000001f
+#define SD_DELAY_STEPS_MSB 4
+#define SD_DELAY_STEPS_LSB 0
+// Register : RX_DELAY
+#define RX_DELAY 0x00000014
+#define RX_DELAY_BITS 0x19f3331f
+#define RX_DELAY_RESET 0x00000000
+// Field : RX_DELAY_BYPASS
+#define RX_DELAY_BYPASS_RESET 0x0
+#define RX_DELAY_BYPASS_BITS 0x10000000
+#define RX_DELAY_BYPASS_MSB 28
+#define RX_DELAY_BYPASS_LSB 28
+// Field : RX_DELAY_FAIL_ACTUAL
+#define RX_DELAY_FAIL_ACTUAL_RESET 0x0
+#define RX_DELAY_FAIL_ACTUAL_BITS 0x08000000
+#define RX_DELAY_FAIL_ACTUAL_MSB 27
+#define RX_DELAY_FAIL_ACTUAL_LSB 27
+// Field : RX_DELAY_ACTUAL
+#define RX_DELAY_ACTUAL_RESET 0x00
+#define RX_DELAY_ACTUAL_BITS 0x01f00000
+#define RX_DELAY_ACTUAL_MSB 24
+#define RX_DELAY_ACTUAL_LSB 20
+// Field : RX_DELAY_OFFSET
+#define RX_DELAY_OFFSET_RESET 0x0
+#define RX_DELAY_OFFSET_BITS 0x00030000
+#define RX_DELAY_OFFSET_MSB 17
+#define RX_DELAY_OFFSET_LSB 16
+// Field : RX_DELAY_OVERFLOW
+#define RX_DELAY_OVERFLOW_RESET 0x0
+#define RX_DELAY_OVERFLOW_BITS 0x00003000
+#define RX_DELAY_OVERFLOW_MSB 13
+#define RX_DELAY_OVERFLOW_LSB 12
+#define RX_DELAY_OVERFLOW_VALUE_ALLOW 0x0
+#define RX_DELAY_OVERFLOW_VALUE_CLAMP 0x1
+#define RX_DELAY_OVERFLOW_VALUE_FAIL 0x2
+// Field : RX_DELAY_MAP
+#define RX_DELAY_MAP_RESET 0x0
+#define RX_DELAY_MAP_BITS 0x00000300
+#define RX_DELAY_MAP_MSB 9
+#define RX_DELAY_MAP_LSB 8
+#define RX_DELAY_MAP_VALUE_DIRECT 0x0
+#define RX_DELAY_MAP_VALUE 0x1
+#define RX_DELAY_MAP_VALUE_STRETCH 0x2
+// Field : RX_DELAY_FIXED
+#define RX_DELAY_FIXED_RESET 0x00
+#define RX_DELAY_FIXED_BITS 0x0000001f
+#define RX_DELAY_FIXED_MSB 4
+#define RX_DELAY_FIXED_LSB 0
+// Register : NDIV
+#define NDIV 0x00000018
+#define NDIV_BITS 0x1fff0000
+#define NDIV_RESET 0x00110000
+// Field : NDIV_DIVB
+#define NDIV_DIVB_RESET 0x001
+#define NDIV_DIVB_BITS 0x1ff00000
+#define NDIV_DIVB_MSB 28
+#define NDIV_DIVB_LSB 20
+// Field : NDIV_DIVA
+#define NDIV_DIVA_RESET 0x1
+#define NDIV_DIVA_BITS 0x000f0000
+#define NDIV_DIVA_MSB 19
+#define NDIV_DIVA_LSB 16
+// Register : CS
+#define CS 0x0000001c
+#define CS_BITS 0x00111101
+#define CS_RESET 0x00000001
+// Field : CS_RX_DEL_UPDATED
+#define CS_RX_DEL_UPDATED_RESET 0x0
+#define CS_RX_DEL_UPDATED_BITS 0x00100000
+#define CS_RX_DEL_UPDATED_MSB 20
+#define CS_RX_DEL_UPDATED_LSB 20
+// Field : CS_RX_CLK_RUNNING
+#define CS_RX_CLK_RUNNING_RESET 0x0
+#define CS_RX_CLK_RUNNING_BITS 0x00010000
+#define CS_RX_CLK_RUNNING_MSB 16
+#define CS_RX_CLK_RUNNING_LSB 16
+// Field : CS_SD_CLK_RUNNING
+#define CS_SD_CLK_RUNNING_RESET 0x0
+#define CS_SD_CLK_RUNNING_BITS 0x00001000
+#define CS_SD_CLK_RUNNING_MSB 12
+#define CS_SD_CLK_RUNNING_LSB 12
+// Field : CS_TX_CLK_RUNNING
+#define CS_TX_CLK_RUNNING_RESET 0x0
+#define CS_TX_CLK_RUNNING_BITS 0x00000100
+#define CS_TX_CLK_RUNNING_MSB 8
+#define CS_TX_CLK_RUNNING_LSB 8
+// Field : CS_RESET
+#define CS_RESET_RESET 0x1
+#define CS_RESET_BITS 0x00000001
+#define CS_RESET_MSB 0
+#define CS_RESET_LSB 0
+
+#define FPGA_SRC_RATE 400000000
+
+/* Base number of steps to delay in relation to tx clk.
+ * The relationship of the 3 clocks are as follows:
+ * tx_clk: This clock is provided to the controller. Data is sent out
+ * to the pads using this clock.
+ * sd_clk: This clock is sent out to the card.
+ * rx_clk: This clock is used to sample the data coming back from the card.
+ * This may need to be several steps ahead of the tx_clk. The default rx delay
+ * is used as a base delay, and can be further adjusted by the sd host
+ * controller during the tuning process if using a DDR50 or faster SD card
+ */
+/*
+ * PRJY-1813 - the default SD clock delay needs to be set to ~60% of the total
+ * number of steps to meet tISU (>6ns) and tIH (>2ns) in high-speed mode.
+ * On FPGA this means delay SDCLK by 5, and sample RX with a delay of 6.
+ */
+#define DEFAULT_RX_DELAY 6
+#define DEFAULT_SD_DELAY 5
+
+struct rp1_sdio_clkgen {
+ struct device *dev;
+
+ /* Source clock. Either PLL VCO or fixed freq on FPGA */
+ struct clk *src_clk;
+ /* Desired base frequency. Max freq card can go */
+ struct clk *base_clk;
+
+ struct clk_hw hw;
+ void __iomem *regs;
+
+ /* Starting value of local register before changing freq */
+ u32 local_base;
+};
+
+static inline void clkgen_write(struct rp1_sdio_clkgen *clkgen, u32 reg, u32 val)
+{
+ dev_dbg(clkgen->dev, "%s: write reg 0x%x: 0x%x\n", __func__, reg, val);
+ writel(val, clkgen->regs + reg);
+}
+
+static inline u32 clkgen_read(struct rp1_sdio_clkgen *clkgen, u32 reg)
+{
+ u32 val = readl(clkgen->regs + reg);
+
+ dev_dbg(clkgen->dev, "%s: read reg 0x%x: 0x%x\n", __func__, reg, val);
+ return val;
+}
+
+static int get_steps(unsigned int steps)
+{
+ int ret = -1;
+
+ if (steps == 4)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_4;
+ else if (steps == 5)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_5;
+ else if (steps == 6)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_6;
+ else if (steps == 8)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_8;
+ else if (steps == 10)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_10;
+ else if (steps == 12)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_12;
+ else if (steps == 16)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_16;
+ else if (steps == 20)
+ ret = MODE_STEPS_PER_CYCLE_VALUE_STEPS_20;
+ return ret;
+}
+
+static int rp1_sdio_clk_init(struct rp1_sdio_clkgen *clkgen)
+{
+ unsigned long src_rate = clk_get_rate(clkgen->src_clk);
+ unsigned long base_rate = clk_get_rate(clkgen->base_clk);
+ unsigned int steps = src_rate / base_rate;
+ u32 reg = 0;
+ int steps_value = 0;
+
+ dev_dbg(clkgen->dev, "init: src_rate %lu, base_rate %lu, steps %d\n",
+ src_rate, base_rate, steps);
+
+ /* Assert reset while we set up clkgen */
+ clkgen_write(clkgen, CS, CS_RESET_BITS);
+
+ /* Pick clock source */
+ if (src_rate == FPGA_SRC_RATE) {
+ /* Using ALT SRC */
+ reg |= MODE_SRC_SEL_VALUE_CLK_ALT_SRC << MODE_SRC_SEL_LSB;
+ } else {
+ /* Assume we are using PLL SYS VCO */
+ reg |= MODE_SRC_SEL_VALUE_PLL_SYS_VCO << MODE_SRC_SEL_LSB;
+ }
+
+ /* How many delay steps are available in one cycle for this source */
+ steps_value = get_steps(steps);
+ if (steps_value < 0) {
+ dev_err(clkgen->dev, "Invalid step value: %d\n", steps);
+ return -EINVAL;
+ }
+ reg |= steps_value << MODE_STEPS_PER_CYCLE_LSB;
+
+ /* Mode register is done now*/
+ clkgen_write(clkgen, MODE, reg);
+
+ /* Now set delay mode */
+ /* Clamp value if out of range rx delay is used */
+ reg = RX_DELAY_OVERFLOW_VALUE_CLAMP << RX_DELAY_OVERFLOW_LSB;
+ /* SD tuning bus goes from 0x0 to 0xf but we don't necessarily have that
+ * many steps available depending on the source so map 0x0 -> 0xf to one
+ * cycle of rx delay
+ */
+ reg |= RX_DELAY_MAP_VALUE_STRETCH << RX_DELAY_MAP_LSB;
+
+ /* Default RX delay */
+ dev_dbg(clkgen->dev, "default rx delay %d\n", DEFAULT_RX_DELAY);
+ reg |= (DEFAULT_RX_DELAY & RX_DELAY_FIXED_BITS) << RX_DELAY_FIXED_LSB;
+ clkgen_write(clkgen, RX_DELAY, reg);
+
+ /* Default SD delay */
+ dev_dbg(clkgen->dev, "default sd delay %d\n", DEFAULT_SD_DELAY);
+ reg = (DEFAULT_SD_DELAY & SD_DELAY_STEPS_BITS) << SD_DELAY_STEPS_LSB;
+ clkgen_write(clkgen, SD_DELAY, reg);
+
+ /* We select freq, we turn on tx clock, we turn on sd clk,
+ * we pick clock generator mode
+ */
+ reg = USE_LOCAL_FREQ_SEL_BITS | USE_LOCAL_CARD_CLK_EN_BITS |
+ USE_LOCAL_CLK2CARD_ON_BITS | USE_LOCAL_CLK_GEN_SEL_BITS;
+ clkgen_write(clkgen, USE_LOCAL, reg);
+
+ /* Deassert reset. Reset bit is only writable bit of CS
+ * reg so fine to write a 0.
+ */
+ clkgen_write(clkgen, CS, 0);
+
+ return 0;
+}
+
+#define RUNNING \
+ (CS_TX_CLK_RUNNING_BITS | CS_RX_CLK_RUNNING_BITS | \
+ CS_SD_CLK_RUNNING_BITS)
+static int rp1_sdio_clk_is_prepared(struct clk_hw *hw)
+{
+ struct rp1_sdio_clkgen *clkgen =
+ container_of(hw, struct rp1_sdio_clkgen, hw);
+ u32 status;
+
+ dev_dbg(clkgen->dev, "is_prepared\n");
+ status = clkgen_read(clkgen, CS);
+ return ((status & RUNNING) == RUNNING);
+}
+
+/* Can define an additional divider if an sd card isn't working at full speed */
+/* #define SLOWDOWN 3 */
+
+static unsigned long rp1_sdio_clk_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ /* Get the current rate */
+ struct rp1_sdio_clkgen *clkgen =
+ container_of(hw, struct rp1_sdio_clkgen, hw);
+ unsigned long actual_rate = 0;
+ u32 ndiv_diva;
+ u32 ndiv_divb;
+ u32 tmp;
+ u32 div;
+
+ tmp = clkgen_read(clkgen, LOCAL);
+ if ((tmp & LOCAL_CLK2CARD_ON_BITS) == 0) {
+ dev_dbg(clkgen->dev, "get_rate 0\n");
+ return 0;
+ }
+
+ tmp = clkgen_read(clkgen, NDIV);
+ ndiv_diva = (tmp & NDIV_DIVA_BITS) >> NDIV_DIVA_LSB;
+ ndiv_divb = (tmp & NDIV_DIVB_BITS) >> NDIV_DIVB_LSB;
+ div = ndiv_diva * ndiv_divb;
+ actual_rate = (clk_get_rate(clkgen->base_clk) / div);
+
+#ifdef SLOWDOWN
+ actual_rate *= SLOWDOWN;
+#endif
+
+ dev_dbg(clkgen->dev, "get_rate. ndiv_diva %d, ndiv_divb %d = %lu\n",
+ ndiv_diva, ndiv_divb, actual_rate);
+
+ return actual_rate;
+}
+
+static int rp1_sdio_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct rp1_sdio_clkgen *clkgen =
+ container_of(hw, struct rp1_sdio_clkgen, hw);
+ u32 div;
+ u32 reg;
+
+ dev_dbg(clkgen->dev, "set_rate %lu\n", rate);
+
+ if (rate == 0) {
+ /* Keep tx clock running */
+ clkgen_write(clkgen, LOCAL, LOCAL_CARD_CLK_EN_BITS);
+ return 0;
+ }
+
+#ifdef SLOWDOWN
+ rate /= SLOWDOWN;
+#endif
+
+ div = (clk_get_rate(clkgen->base_clk) / rate) - 1;
+ reg = LOCAL_CLK_GEN_SEL_BITS | LOCAL_CARD_CLK_EN_BITS |
+ LOCAL_CLK2CARD_ON_BITS | (div << LOCAL_FREQ_SEL_LSB);
+ clkgen_write(clkgen, LOCAL, reg);
+
+ return 0;
+}
+
+#define MAX_NDIV (256 * 8)
+static int rp1_sdio_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ unsigned long rate;
+ struct rp1_sdio_clkgen *clkgen =
+ container_of(hw, struct rp1_sdio_clkgen, hw);
+ unsigned long base_rate = clk_get_rate(clkgen->base_clk);
+ u32 div;
+
+ /* What is the actual rate I can get if I request xyz */
+ if (req->rate) {
+ div = min((u32)(base_rate / req->rate), (u32)MAX_NDIV);
+ rate = base_rate / div;
+ req->rate = rate;
+ dev_dbg(clkgen->dev, "determine_rate %lu: %lu / %d = %lu\n",
+ req->rate, base_rate, div, rate);
+ } else {
+ rate = 0;
+ dev_dbg(clkgen->dev, "determine_rate %lu: %lu\n", req->rate,
+ rate);
+ }
+
+ return 0;
+}
+
+static const struct clk_ops rp1_sdio_clk_ops = {
+ .is_prepared = rp1_sdio_clk_is_prepared,
+ .recalc_rate = rp1_sdio_clk_get_rate,
+ .set_rate = rp1_sdio_clk_set_rate,
+ .determine_rate = rp1_sdio_clk_determine_rate,
+};
+
+static int rp1_sdio_clk_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct rp1_sdio_clkgen *clkgen;
+ void __iomem *regs;
+ struct clk_init_data init = {};
+ int ret;
+
+ clkgen = devm_kzalloc(&pdev->dev, sizeof(*clkgen), GFP_KERNEL);
+ if (!clkgen)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, clkgen);
+
+ clkgen->dev = &pdev->dev;
+
+ /* Source freq */
+ clkgen->src_clk = devm_clk_get(&pdev->dev, "src");
+ if (IS_ERR(clkgen->src_clk)) {
+ int err = PTR_ERR(clkgen->src_clk);
+
+ dev_err(&pdev->dev, "failed to get src clk: %d\n", err);
+ return err;
+ }
+
+ /* Desired maximum output freq (i.e. base freq) */
+ clkgen->base_clk = devm_clk_get(&pdev->dev, "base");
+ if (IS_ERR(clkgen->base_clk)) {
+ int err = PTR_ERR(clkgen->base_clk);
+
+ dev_err(&pdev->dev, "failed to get base clk: %d\n", err);
+ return err;
+ }
+
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ init.name = node->name;
+ init.ops = &rp1_sdio_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+
+ clkgen->hw.init = &init;
+ clkgen->regs = regs;
+
+ dev_info(&pdev->dev, "loaded %s\n", init.name);
+
+ ret = devm_clk_hw_register(&pdev->dev, &clkgen->hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &clkgen->hw);
+ if (ret)
+ return ret;
+
+ ret = rp1_sdio_clk_init(clkgen);
+ return ret;
+}
+
+static int rp1_sdio_clk_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static const struct of_device_id rp1_sdio_clk_dt_ids[] = {
+ { .compatible = "raspberrypi,rp1-sdio-clk", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rp1_sdio_clk_dt_ids);
+
+static struct platform_driver rp1_sdio_clk_driver = {
+ .probe = rp1_sdio_clk_probe,
+ .remove = rp1_sdio_clk_remove,
+ .driver = {
+ .name = "rp1-sdio-clk",
+ .of_match_table = rp1_sdio_clk_dt_ids,
+ },
+};
+module_platform_driver(rp1_sdio_clk_driver);
+
+MODULE_AUTHOR("Liam Fraser <liam@raspberrypi.com>");
+MODULE_DESCRIPTION("RP1 SDIO clock driver");
+MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink