forked from Openwrt/openwrt
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
130 lines
3.6 KiB
Diff
130 lines
3.6 KiB
Diff
From 539504510aa759949141e0204d3548f95f8f9a42 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Wed, 12 Oct 2022 13:24:51 +0100
|
|
Subject: [PATCH 0531/1085] serial: pl011: rp1 uart support
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
drivers/tty/serial/amba-pl011.c | 96 +++++++++++++++++++++++++++++++++
|
|
1 file changed, 96 insertions(+)
|
|
|
|
--- a/drivers/tty/serial/amba-pl011.c
|
|
+++ b/drivers/tty/serial/amba-pl011.c
|
|
@@ -152,6 +152,20 @@ static const struct vendor_data vendor_s
|
|
.fixed_options = true,
|
|
};
|
|
|
|
+static struct vendor_data vendor_arm_axi = {
|
|
+ .reg_offset = pl011_std_offsets,
|
|
+ .ifls = UART011_IFLS_RX4_8 | UART011_IFLS_TX4_8,
|
|
+ .fr_busy = UART01x_FR_BUSY,
|
|
+ .fr_dsr = UART01x_FR_DSR,
|
|
+ .fr_cts = UART01x_FR_CTS,
|
|
+ .fr_ri = UART011_FR_RI,
|
|
+ .oversampling = false,
|
|
+ .dma_threshold = false,
|
|
+ .cts_event_workaround = false,
|
|
+ .always_enabled = false,
|
|
+ .fixed_options = false,
|
|
+};
|
|
+
|
|
#ifdef CONFIG_ACPI_SPCR_TABLE
|
|
static const struct vendor_data vendor_qdt_qdf2400_e44 = {
|
|
.reg_offset = pl011_std_offsets,
|
|
@@ -2979,6 +2993,86 @@ static struct platform_driver arm_sbsa_u
|
|
},
|
|
};
|
|
|
|
+static int pl011_axi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct uart_amba_port *uap;
|
|
+ struct vendor_data *vendor = &vendor_arm_axi;
|
|
+ struct resource *r;
|
|
+ unsigned int periphid;
|
|
+ int portnr, ret, irq;
|
|
+
|
|
+ portnr = pl011_find_free_port();
|
|
+ if (portnr < 0)
|
|
+ return portnr;
|
|
+
|
|
+ uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
|
|
+ GFP_KERNEL);
|
|
+ if (!uap)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ uap->clk = devm_clk_get(&pdev->dev, NULL);
|
|
+ if (IS_ERR(uap->clk))
|
|
+ return PTR_ERR(uap->clk);
|
|
+
|
|
+ if (of_property_read_bool(pdev->dev.of_node, "cts-event-workaround")) {
|
|
+ vendor->cts_event_workaround = true;
|
|
+ dev_info(&pdev->dev, "cts_event_workaround enabled\n");
|
|
+ }
|
|
+
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
+ if (irq < 0)
|
|
+ return irq;
|
|
+
|
|
+ periphid = 0x00241011; /* A safe default */
|
|
+ of_property_read_u32(pdev->dev.of_node, "arm,primecell-periphid",
|
|
+ &periphid);
|
|
+
|
|
+ uap->reg_offset = vendor->reg_offset;
|
|
+ uap->vendor = vendor;
|
|
+ uap->fifosize = (AMBA_REV_BITS(periphid) < 3) ? 16 : 32;
|
|
+ uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
|
|
+ uap->port.irq = irq;
|
|
+ uap->port.ops = &amba_pl011_pops;
|
|
+
|
|
+ snprintf(uap->type, sizeof(uap->type), "PL011 AXI");
|
|
+
|
|
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+
|
|
+ ret = pl011_setup_port(&pdev->dev, uap, r, portnr);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ platform_set_drvdata(pdev, uap);
|
|
+
|
|
+ return pl011_register_port(uap);
|
|
+}
|
|
+
|
|
+static int pl011_axi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct uart_amba_port *uap = platform_get_drvdata(pdev);
|
|
+
|
|
+ uart_remove_one_port(&amba_reg, &uap->port);
|
|
+ pl011_unregister_port(uap);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct of_device_id pl011_axi_of_match[] = {
|
|
+ { .compatible = "arm,pl011-axi" },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, pl011_axi_of_match);
|
|
+
|
|
+static struct platform_driver pl011_axi_platform_driver = {
|
|
+ .probe = pl011_axi_probe,
|
|
+ .remove = pl011_axi_remove,
|
|
+ .driver = {
|
|
+ .name = "pl011-axi",
|
|
+ .pm = &pl011_dev_pm_ops,
|
|
+ .of_match_table = of_match_ptr(pl011_axi_of_match),
|
|
+ .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
|
|
+ },
|
|
+};
|
|
+
|
|
static const struct amba_id pl011_ids[] = {
|
|
{
|
|
.id = 0x00041011,
|
|
@@ -3012,6 +3106,8 @@ static int __init pl011_init(void)
|
|
|
|
if (platform_driver_register(&arm_sbsa_uart_platform_driver))
|
|
pr_warn("could not register SBSA UART platform driver\n");
|
|
+ if (platform_driver_register(&pl011_axi_platform_driver))
|
|
+ pr_warn("could not register PL011 AXI platform driver\n");
|
|
return amba_driver_register(&pl011_driver);
|
|
}
|
|
|